xx
AWG52UP
Option SSD, SSD-WIN10
ZZZ
AWG5200 Series Upgrades
Instructions
www.tek.com
P075109601*
*
075-1096-01
Copyright © Tektronix. All rights reserved. Licensed software products are owned by Tektronix or its subsidiaries
or suppliers, and are protected by national copyright laws and international treaty provisions.
Tektronix products are covered by U.S. and foreign patents, issued and pending. Information in this publication
supersedes that in all previously published material. Specifications and price change privileges reserved.
TEKTRONIX and TEK are registered trademarks of Tektronix, Inc.
Contacting Tektronix
Tektronix, Inc.
14150 SW Karl Braun Drive
P.O. Box 5 0 0
Beaverto
USA
For product information, sales, service, and technical support:
n, OR 97077
In North America, call 1-800-833-9200.
Worldwide, visit www.tek.com to find contacts in your area.
Service safety summary
Only qualified personnel should perform service procedures. Read this Service
safety summary before performing any service procedures.
Do not service alone. Do not perform internal service or adjustments of this
product unless another person capable of rendering first aid and resuscitation is
present.
Disconnect power. To avoid electric shock, switch off the instrument power, then
disconnec
Use care when servicing with power on. Dangerous voltages or currents may exist
in this product. Disconnect power, remove battery (if applicable), and disconnect
test leads before removing protective panels, soldering, or replacing components.
To avoid electric shock, do not touch exposed connections.
t the power cord from the mains power.
AWG5200 Series Upgrades 1
Service safety summary
2 AWG5200 Series Upgrades
Kit overview
This document provides instructions to install the solid state drive on the
following Tektronix products:
AWG5202 Arbitrary Waveform Generators
AWG5204 Arbitrary Waveform Generators
AWG5 208 Ar b
itrary Waveform Generators
Upgrade kits covered by
these instructions
Item Description
AWG52UP SSD Provides a preprogrammed Solid State Drive with the Microsoft
operating system.
■ provide an additional (or replacement) SSD with the
Windows
■ conve
Windows 10 OS.
■ provide an additional (or replacement) SSD with the
Window
7OS.
s a preprogrammed Solid State Drive with the Microsoft
rt an instrument with the Windows 7 OS to the
s10OS.
AWG52UP
SSD-WIN10
Windows 7
This drive can be used to:
Provide
Windows 10 operating system.
This drive can be used to:
For a complete list of available options, see the Tektronix website
(www.tektronix.com) or your Tektronix representative.
Hardware included
Hardware included
AWG5200 Series Upgrades 3
Kit overview
Kit parts lists
AWG52UP SSD and
AWG52UP SSD-WIN10
The kit contains the following items:
Tektronix par
number Qty. Description
211-1081-XX
335-3376-X
Solid state drive
850-0424-XX
850-0358-XX
883-XX
407-5
407-5884-XX
t
1
4
SCREW, MACHI
W/SERRATIONS STRESS RELIEVED, PHL, ZINC PLATED
STEEL
1
X
1
MARKER, IDENT; HD ADAPTER (SLED); SAFETY
CONTROLLED
1
Contains the Windows Operating System and the most
current instrument application software.
One of the following SSD drives is included:
1
AWG52UP
Windows 10 operating system
HARD DRIVE, PROGRAMMED; SOLID STATE DRIVE
PROGRA
1
AWG52UP SSD
Window
HARD DRIVE, PROGRAMMED; SOLID STATE DRIVE
PROGRAMMED W/ OS & APP SW
1
1
1
BRACKET, HARD DRIVE, F RO NT COVER
1
KET, HARD DRIVE, SLED
BRAC
NE; M3 X 0.5 X 3.5MM, FLAT WAFER HD
SSD-WIN10
MMED W/ OS & APP SW
s 7 operating system
075-1096-XX 1
1
The hard drive and the mechanical sled components are pre-assembled.
MANUAL, KIT INSTR UCTIONS
4 AWG5200 Series Upgrades
Installation
Refer to the one (or more) of the following installation sections pertaining to the
upgrade(s) you are installing.
Minimum tool and equipment list
No special tools or equipment is required to install the upgrade kits covered by
these insta
AWG52UP SSD and
AWG52UP SSD-WIN10 installation
NOTE. Before installing the new hard drive, use an external backup device to
back up any files on your instrument for use on the new hard drive.
llation instructions.
Installation
Install the hard drive using the following procedure:
1. Power off the instrument.
2. Loosen the thumb screws and remove the existing hard drive.
3. Inser
t the new hard drive sled and then tighten the thumb screws, securing the
drive. (The hard drive and hard drive sled components are pre-assembled in
the kit.)
AWG5200 Series Upgrades 5
Installation
Windows 10 activation
4. Power on t
NOTE. In the hard drive contains Microsoft Windows 10, activation is required.
See the following.
The version of Microsoft Windows 10 included on the hard drive is shipped in
Deferred Activation mode. Microsoft has a default activation method that requires
a connection to the Internet. If you do not have a connection, you can activate
Windows by phone or you can continue to operate in Deferred Activation mode.
t time activation. You can activate Windows 10 two ways.
Firs
Connect to the Internet. Windows will automatically activate. You can also
o System Properties to connect and activate.
go t
Call Microsoft and speak with a representative to activate Windows 10.
ntact information and a unique activation code (installation ID) will appear
Co
in a pop up window.
Activation with removable drives. If the SSD is removed from one instrument and
inserted into another instrument, the activation process needs to be run again. If
instrument 2 is not connected to the Internet, the activation fails and an Activate
Windows watermark is displayed on the screen. To activate Windows and remove
the watermark, you must connect to the Internet or call Microsoft.
he instrument to verify operation.
6 AWG5200 Series Upgrades
Verify instrument software version
Verify instru
ment software version
Tektronix re
your instrument.
1. Select Util
Software Version number.
2. Use your We
3. Search for your instrument’s model number and follow the link to the software.
4. If the installed software is older than that available, download the software.
5. Follow the instructions on the Web page to install the software.
commends to update to the latest available application software for
ities > About my AWG. Under System Information, note the
b browser to go to: www.tektronix.com/software.
AWG5200 Series Upgrades 7
Loading...