xx
AWG5000B/C and AWG7000B/C Series
Product Software
ZZZ
Version 4.0.8
CD-ROM
*P071305200*
071-3052-00
Copyright © Tektronix. All rights reserved. Licensed software products are
owned by Tektronix or its subsidiaries or suppliers, and are protected by national
copyright laws and international treaty provisions.
Tektronix products are covered by U.S. and foreign patents, issued and pending.
Information in this publication supersedes that in all previously published
material. Specifications and price change privileges reserved.
TEKTRONIX and TEK are registered trademarks of Tektronix, Inc.
Contacting Tektronix
Tektronix, Inc.
14150 SW Karl Braun Drive
P.O. Box 500
Beaverton, OR 97077
USA
For product information, sales, service, and technical support:
In North America, call 1-800-833-9200.
Worldwide, visit www.tektronix.com to find contacts in your area.
AWG5000B/C and AWG7000B/C Series Product Software
This compact disc contains the product software for the AWG5000B/C and
AWG7000B/C Series Arbitrary Waveform Generators, as well as accessory
software and files.
This compact disc serves as a backup in the event that you have to reload the
product software or rebuild the hard drive. Table 1 describes the software on
this compact disc.
Table 1: Product software CD-ROM contents
Factory
Item Description
AWG
Software
Adobe
Reader
TekVISA A library of industry-standard compliant software
Instrument firmware and support software. See
page 2 for installation instructions.
This directory contains an Adobe Reader installer.
Adobe Reader is software to view, print, and search
Adobe PDF files.
components, organized according to the standard
VISA model established by the VXIplug&play
Systems Alliance.
installed?
Yes
Yes
Yes
1
AWG5000B/C and AWG7000B/C Series Product Software
Installing the AWG Software
This software is factory installed on the instrument hard disk. This software
contains the instrument firmware and the other files needed to operate the
instrument. If you need to reinstall this software, do these steps:
If you are rebuilding the complete contents of the hard disk, you must restore the
NOTE.
Windows operating system before you install the product software. See the Operating
System Restore DVD that was shipped with your AWG5000B/C or AWG7000B/C Series
generator for instructions on how to restore the operating system.
If you are only reinstalling the production software, proceed with step 1.
1.
If the keyboard and the mouse are not installed, connect them to the instrument
(the standard-accessory keyboard and mouse plug into the USB connector). If
connecting PS2 keyboard and mouse, first shut down the instrument.
2.
Power on the instrument to start Microsoft Windows.
3.
Insert the product software CD-ROM into the CD drive of the instrument.
4.
The installer starts automatically from the CD-ROM.
5.
When “Welcome to the InstallShield Wizard for Tektronix AWG Software”
appears, click
Next
.
2
AWG5000B/C and AWG7000B/C Series Product Software
6.
When “License Agreement” appears, select “I accept the terms of the license
agreement” if you agree to the terms, and then click
7.
When “InstallShield Wizard Complete” appears, click
8.
Double-click the AWG icon on the desktop to start the AWG software.
9.
“Windows Security Alert” is displayed when the AWG software starts for
the first time. Click
Unblock
.
Next
Finish
.
.
3
AWG5000B/C and AWG7000B/C Series Product Software
Installing the Adobe Reader Software
Several documents are supplied as a PDF file. To read these documents, you need
the Adobe Reader software. To install the Adobe Reader software, do these steps:
1.
Before you install Adobe Reader, close the AWG software.
2.
Insert the product software CD-ROM into the CD drive.
3.
The AWG software installer should auto run. Click
installing.
4.
Double-click the Adobe Reader .exe file in the Abode Reader folder of the
CD-ROM to install the software.
5.
Follow the install wizard instructions.
6.
When “Setup Complete” appears, click
Finish
Cancel
to discontinue
.
Get the Latest Information.
updates, check Adobe Systems Incorporated Web site (http://www.adobe.com/)
and search for virus, patch, or critical updates.
4
For information on the latest software and critical
AWG5000B/C and AWG7000B/C Series Product Software
Installing the TekVISA Software
To install the TekVISA software, do these steps:
1.
Before you install TekVISA, close the AWG software.
2.
Insert the product software CD-ROM into the CD drive.
3.
The AWG software installer should auto run. Click
Cancel
to discontinue
installing.
4.
Double-click TekVisa .exe in the TekVISA folder of the CD-ROM to install
the software.
5.
Follow the install wizard instructions.
6.
When “InstallShield Wizard Complete” appears, click
7.
The Windows operating system restarts. After that, the AWG software starts
Finish
.
automatically.
The default path to unzip the TekVISA file is D:\TekVISA. If this path does not work,
NOTE.
change it to C:\TekVISA and then click the Unzip button.
5
AWG5000B/C and AWG7000B/C Series Product Software
6
Loading...