
Keithley Instruments
28775 Aurora Road
Cleveland, Ohio 44139
1-800-833-9200
tek.com/keithley
Model AFG31000-RMK Rack-Mount Kit
Assembly and mounting instructions
071368001 January 2021 *P071368001* 1
Introduction
The AFG31000-RMK Fixed Rack-Mount Kit contains all of the hardware needed to install an AFG31000
Arbitrary Function Generator in a standard 19-inch equipment rack. The instrument occupies 5U of space when
installed.
Figure 1: Typical installation

Model AFG31000-RMK Rack-Mount Kit Assembly and mounting instructions
Tools required
▪ Medium (#2) Phillips screwdriver
▪ 3/8-inch wrench
▪ Flat-bladed screwdriver or cage-nut installation tool
Parts list
The following figure shows the hardware that is supplied with this kit. The table following the figure lists the
hardware, part numbers, and quantity.
Figure 2: Model AFG31000-RMK rack-mount kit parts
10-32 × 5/8 in. Phillips truss-head screw
6-32 × 3/8 in. Phillips pan-head screw
6-32 × 1/2 in. Phillips pan-head screw
8-32 × 3/8 in. Phillips flat-head screw

Model AFG31000-RMK Rack-Mount Kit Assembly and mounting instructions
Installation
To install an instrument in the rack:
1. Determine where in the rack to mount the instrument.
2. Install cage nuts on each of the front rack rails as shown in the following figure. The clips must be 4U apart.
Figure 3: Install the cage nuts on the front rails