Tektronix AD007 Read This First Read This First

AD007
GPIB-LAN Adapter
Read This First

071-0246-00

*P071024600*

071024600

Important !

Contact your network administrator
before connecting the AD007 adapter.

1. Fill out the Network Information Card. .

User

j Copy the Ethernet hardware address of the AD007

adapter onto the card.

j Give these instructions and the card to the network

administrator.

Network Administrator or Network Technician

j Assign the IP address/hostname to the adapter .

j Set up the network for the adapter. Refer to the

network protocols on the back of the card.

j Copy the IP address onto the card. Please comment on

the card whether or not the network supports one of the
boot protocols used by the adapter (DHCP or BOOTP).

j If the network does not support DHCP or BOOTP,

please note the subnet mask and router address on the
card.

j Identify the network drop (subnet) that the user must

connect the adapter to.

j Photocopy the card for your records if necessary.

Return the original card and these instructions to the
user.

2. Refer to the Getting Started section in the
AD007 User Manual for further installation
instructions.