Tektronix A622, A621 DATASHEET
Current Probes
A621 • A622 Data Sheet
A621
Features & Benefits
A622
A621
AC - 5 Hz to 50 kHz
100mAto2000APeak
For DMM’s and Oscilloscopes
Clamp On
A622
AC/DC - 100 kHz
50 mA to 100 A Peak
For DMM’s and Oscilloscopes
Appli
cations
Motor Drives
ters
Inver
Power Supplies
ics
Avion
The A600 Series cu rrent probes high-value current probes are s peci fically
designed to support measurements you m ake with your DMM, TekMeter
or oscilloscope*1.
®
A621 2000 Amp AC Current Probe/BNC
This industrial-style clamp-on probe has a BNC connector and may be
used with a shrouded banana plug adapter*
multimeters, TekMeter, and scopes. The A621 can measure AC currents
from 100 mA to 2000 A peak over a frequency range of 5 Hz to 50 kHz. It
provides a 1 mV, 10 mV, or 100 mV output for each Amp measured.
1
soitcanbeusedondigital
A622 100 Amp AC/DC Current Probe/BNC
This "long nose" style clamp-on probe uses a Hall Effect current sensor
to provide a voltage output to oscilloscopes. It has a BNC connector and
may be used with a shrouded banana plug adapter*
on digital multimeters, TekMeter, and scopes. The A622 can measure
AC/DC currents from 50 mA to 100 A peak over a frequency range of DC to
100 kHz. It provides 10 mV or 100 mV output for each Amp measured.
r instruments with banana jack inputs, Tektronix part number 012-1450-00 Female BNC to banana lead
*1Fo
ter is required.
adap
1
so it can also be used
Data Sheet
Probe Compatibility Chart
Part #
A621
Description
AC Current Probe,
DMM100*
1
DMM200*
Yes Yes Yes Yes Yes
2000 A
A622
AC/DC Current Probe,
Yes Yes Yes Yes Yes
100 A
*1For instruments with banana jack inputs, Tektronix part number 012-1450-00 Female BNC to banana lead adapter is required.
1
DMM910*
1
THS700*
1
TX3/TX1*
1
Typical Characteristics
A621 A622
Frequency Range 5 Hz to 50 kHz
Max. Input Current
2000 A peak 100 A peak
Output 1 mV/A, 10 mV/A,
DC to 100 kHz
10 mV/A, 100 mV/A
100 mV/A
Max. Conductor Diameter 54 mm (2.13 in.) 11.8 mm (0.46 in.)
Termi n a t i o n
Max. Bare Wire Voltage
Safety
CSA1010.2.032
EN61010-2-032
IEC61010-2-032
*1For instruments with banana jack inputs, Tektronix part number 012-1450-00 Female BNC to banana lead
adapter is required.
1
BNC*
600 V (CATIII) 600 V (CATIII)
UL3111-2-032
CSA1010.2.032
EN61010-2-032
IEC61010-2-032
1
BNC*
UL3111-2-032
Ordering Information
A621
2000 A AC Current Probe/BNC.
A622
100 A AC/DC Current Probe/BNC.
Service
Opt. R3 – Repair Service 3 Years
Opt. R5 – Repair Service 5 Years
Recommended Accessories
A621, A62
Adapter, lead; discrete – MLD, 2, 18 AWG, dual insul, BNC, female X 4 mm dual
insul; banana jack X dual insul plug, shield banana. Order 012-1450-xx.
2
Product(s) are
manufactured in ISO registered facilities.
2 www.tektronix.com
Loading...