Tektronix 80C12, 80C11, 80C25GBE, 80C08C DATASHEET
Optical Sampling Modules
80C07B • 80C08C • 80C10B • 80C11 • 80C12 • 80C25GBE Data Sheet
Tributary Telecom and Datacom
80C07B and 80C12 provide Excellent Optical Sensitivity and Broad
Wavelength Test Capability
2 Multirate Telecom Conformance Testing Solutions
1
Mb/s (OC-3/STM-4) through 11.317 Gb/s (10GFC w/
Features & Benefits
10 Gb/s Tel
100 Gb/s and 40 Gb/s Telecom and Datacom
ecom and Datacom
Highly Accurate ER Calibrated (Extinction Ratio) Measurement Option
for Increased Repeatability and Transferability of the Measurement
80C08C and 80C12 (w/ Option 10G) – Low-noise, High Optical
Sensitivity, and Broad Wavelength Conformance Testing for 10 GbE,
40 GbE (R4), 1 00 GbE (X10) LAN, WAN, FEC, 10G Fibre Channel,
and 10 Gb/s
80C11 30 GHz Optical Bandwidth Conformance Testing and
Characterization for 10 Gb/s Telecom and Datacom Standards and
FEC Rates
80C08C and 80C11 Integrated Clock Recovery supports All Current
10 Gb/s Standards or User-defined Rates from 9.8 to 12.6 Gb/s (CR4)
80C12 Clo
80A07 Clock Recovery Module (Sold Separately)
80C10B 80 GHz Optical Bandwidth and Lowest Noise Capability for
Performa
RZ, or Optical Duobinary Data Formats
New 80C10B Option F1 provides Optical Reference Receivers for
Conformance Testing of 25.781 Gb/s (100GBase-R4), 27.739 Gb/s
(100GBase-R4 w/ FEC), 39.813 Gb/s (OC-768/STM-256, VSR-2000),
41.25 Gb/s (40GBase-R1), 43.018 Gb/s (OTU3, VSR-2000 w/ FEC,
4x10G LA
New 80C25GBE module provides 65 GHz full bandwidth and
fully integrated selectable reference rece iver filtering, enabling
conformance testing at either 1310 nm or 1550 nm for 27.739G
(100GBase-LR4+FEC and 100GBase-ER4+FEC), and 25.781G
(100GBase-LR4 and 100GBase-ER4 )
Telecom Standards and FEC Rates
ck Recovery for 10 Gb/s Rate is supported by the 80A05 or
nce Testing and Signal Characterization of 40 Gb/s NRZ,
NPHYOTU3)inasinglemodule
80C07B, 80C1
from 125*
FEC) and Multirate Datacom Conformance Testing Solutions for Fibre
Channel, Gigabit Ethernet, and Infiniband Standards
Applications
High-speed Optical Communications Testing
Extinction Ratio and Q-factor Measurements
Eye-pattern and Pulse Shape Analysis
Relaxation Oscillation Testing
Optical Signal Analysis
Compliance Testing
NRZ, RZ, and Optical Duobinary Signal Characterization
DSA8200*2Series Sampling Oscilloscope
Optical Modules
The DSA8200 Series Sampling Oscilloscope, when configured with one or
more optic
Telecom (125 Mb/s to 44.50 Gb/s) or Datacom (Gigabit Ethernet, 10 GbE,
40 GbE, 100 GbE, Fibre Channel to 10 GFC, and InfiniBand) applications,
as well as general-purpose optical component testing.
Each optical module includes all the elements necessary for optical testing:
*1125 Mb/s is supported by selecting 155 Mb/s rate.
2
*
Also compatible with CSA/TDS8200, CSA/TDS8000B, and CSA/TDS8000 sampling oscilloscopes.
al sampling modules, provides complete optical test solutions for
Optical-to-Electrical Converter
Average Power Monitor
One or More Reference Receiver Filters
A Full Bandwidth Optical Path
Optional Integrated Clock Recovery (80C12 clock recovery is provided
using the 80A05 or 80A07 Clock Recovery Module – sold separately)
Universal Optical Input Connector
Data Sheet
New: ER Calibrated (Extinction Ratio)
To increase the level of transferability of the ER measurem ent, ER
calibration o f the module against a calibrated, known, high ER source. This
optional feature is available on most modules (see Ordering).
Calibrated reduces the uncertainty of ER results through Tektronix
Optical Sampl
Module Description
80C07B Multirate, Datacom and Telecom The 80C07B module is a broad wavelength (700 to 1650 nm) multirate optical sampling module optimized for testing
80C08C Mult
High Sensit
80C10B Multirate Datacom and Telecom 40 Gb/s
and 100 Gb/s
ultirate, 10 Gb/s Datacom and Telecom
80C11 M
80C12 Multirate Datacom and Telecom The 80C12 module is a broad wavelength (700 to 1650 nm) multirate optical sampling module providing 1G, 2G, 4G, 8G,
C25GBE Multirate Datacom 100 Gb/s
80
ing Modules
irate, Broad Wavelength,
ivity 10 Gb/s
datacom/telecom signals from 125 to 2500 Mb/s.
With its amplified O/E converter design, this module provides excellent signal-to-noise performance, allowing users to
examine low-power optical signals. The 80C07B can be optionally configured with clock recovery that supports 125, 155,
622, 1063, 1250, 2125, 2488, 2500, and 2666 Mb/s rates.
The 80C08C m
testing for
applicatio
10.709 Gb/s
With its am
sensitivi
recovery o
The 80C10B module provides integrated and selectable reference receiver filtering, enabling conformance testing at either
1310 nm or 1550 nm for 39.813 Gb/s (OC-768/STM-256), 41.25 Gb/s (40GBase-LR), and 43.018 Gb/s [OTU3, (4×10G LAN
PHY)] rates. In addition to the filter rates, the user may also choose selectable bandwidths of 30 GHz, 65 GHz, and 80 GHz
for 80C10B for optimal noise vs. bandwidth performance for accurate signal characterization. The 80C10B is optionally
available with Option F1 which extends filter selections to include 27.739 Gb/s (100GBase-LR4 + FEC and 100GBase-ER4
+ FEC), and 25.781 Gb/s (100GBase-LR4 and 100GBase-ER4 ). The 80C10B is also optionally available in a bundled
ordering configuration which includes a 70+ GHz electrical sampling channel.
The 80C
dataco
its hig
compon
defined rate in the continuous range from 9.8 to 12.6 Gb/s.
user-
and 10G telecom and datacom testing. This highly flexible module can be configured to support either lower data rate
applications (1 to 8.5 Gb/s) or a wide variety of 10 Gb/s applications. The low data rate applications include: 1, 2, 4, and
8G Fibre Channel, multilane standards such as 10GBase-X4 and 4-Lane 10 Gb/s Fibre Channel, and Infiniband SDR and
DDR rates. The supported 10 Gb/s application includes both datacom and telecom application. The supported 10 Gb/s
datacom applications include 10GbE, 40GbE-R4, 100GbE-SR10 applications at 9.953, 10.3125, 11.0957 Gb/s and 10G
Fibre Channel applications at 10.51875 Gb/s and 11.317 Gb/s. The 80C12 also provides telecom rate testing at 9.953,
10.664, and 10.709 Gb/s.
With its amplified O/E converter design, this module provides excellent signal-to-noise performance and high optical
sensitivity, allowing users to examine low power level optical signals. Clock recovery for the 80C12 is provided using the
80A05 or 80A07 (sold separately).
C25GBE module provides 65 GHz full bandwidth and integrated and selectable reference receiver filtering, enabling
80
nformance testing at either 1310 nm or 1550 nm for 27.739G (100GBase-LR4+FEC and 100GBase-ER4+FEC), and
co
.781G (100GBase-LR4 and 100GBase-ER4).
25
odule is a broad wavelength (700 to 1650 nm) multirate optical sampling module providing datacom rate
10GbE, 40GbE-R4, 100GbE-SR10 applications at 9.953, 10.3125, 11.0957 Gb/s and 10G Fibre Channel
ns at 10.51875 Gb/s and 11.317 Gb/s. The 80C08C also provides telecom rate testing at 9.953, 10.664, and
.
plified O/E converter design, this module provides excellent signal-to-noise performance and high optical
ty, allowing users to examine low power level optical signals. The 80C08C can be optionally configuredwithclock
ptions that can support any standard or user-defined rate in the continuous range from 9.8 to 12.6 Gb/s.
11 module is a long wavelength (1100 to 1650 nm) multirate optical sampling module optimized for testing 10 Gb/s
m and telecom standard rates at 9.953, 10.3125, 10.51875, 10.664, 10.709, 11.0957, 11.317, and 14.025 Gb/s. With
h optical bandwidth of up to 30 GHz (typical) it is well suited for general-purpose high-performance 10 Gb/s optical
ent testing. The 80C11 can be optionally configured with clock recovery options that can support any standard or
2 www.tektronix.com
Optical Sampling Modules — 80C07B • 80C08C • 80C10B • 80C11 • 80C12 • 80C25GBE
Optical Modules: 80C07B
Module
Opt.
Bandwidth
(GHz)
Wavelength
Range (nm)
Fibre Input
(μm)
Mask Test
Sensitivity
(dBm)
Number of
Channels
Rates Supported: ■=Filter, ♦=Optical Clock Recovery, ⊕=Electrical Clock Recovery
125 Mb/s*
155 Mb/s
622 Mb/s
1063 Mb/s
1250 Mb/s
2125 Mb/s
2488 Mb/s
2500 Mb/s
3.125 Gb/s
3.188 Gb/s
3.32 Gb/s
4.25 Gb/s
9.95 Gb/s
*1125 Mb/s is supported by selecting 155 Mb/s rate.
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10
2.52.52.52.52.52.52.52.52.52.52.5
700-1650 700-1650 700-1650 700-1650 700-1650 700-1650 700-1650 700-1650 700-1650 700-1650 700-1650
9or50or
62.5
9or50or
62.5
9or50or
62.5
9or50or
62.5
9or50or
62.5
–22 –22 –22 –22 –22 –22 –22 –22 –22 –22 –22
11111111111
1
■■■■
■■■■
■ ■■■
■■■■
■ ■■■
■■■■
■■■■■■■■■■
■■■■■■■■■■
80C07B
9or50or
62.5
9or50or
62.5
9or50or
62.5
9or50or
62.5
9or50or
62.5
CR1
9or50or
62.5
♦
♦
♦
♦
♦
♦
♦
♦
Optical Modules: 80C08C, 80C10B, 80C11, and 80C25GBE
Module
Opt. CR1 CR2 CR4
Bandwidth
10 10 10 10 80 65 65 30 30 30 30 30
80C08C 80C10B 80C25GBE 80C11
(GHz)
elength
Wav
ge (nm)
Ran
Fibre Input
(μm)
Mask Test
-1650
700
9or50or
62.5
-1650
700
9or50or
62.5
-1650
700
9or50or
62.5
–15 –15 –15 –15
-1650
700
9or50or
62.5
0-1330
129
0-1620
152
99999999
–7
Sensitivity
(dBm)
Number of
111111111111
Channels
Rates Supported: ■=Filter, ♦=Optical Clock Recovery, ⊕=Electrical Clock Recovery
9.95 Gb/s
10.31 Gb/s
10.52 Gb/s
10.66 Gb/s
10.71 Gb/s
11.1 Gb/s
11.3 Gb/s
■
■
■
■
■
■
■
♦ ♦ ♦■♦♦♦♦
♦♦♦
♦♦
♦
♦
♦
♦
14.025 Gb/s
25.78 Gb/s
27.74 Gb/s
39.81 Gb/s
41.25 Gb/s
43.02 Gb/s
■■
■■
■■
129
152
F1
0-1330
0-1620
129
152
0-1330
0-1620
110
0-1650
CR1 CR2 CR3 CR4
110
0-1650
110
0-1650
110
0-1650
–8 –8 –9 –9 –9 –9 –9
■
■
■
■
♦♦
♦♦♦
■
■
■■■■■
■■■
■■
110
0-1650
♦
♦
♦
♦
www.tektronix.com 3
Data Sheet
Optical Modules: 80C12
Module
Opt.
Bandwidth
F1 F2 F3 F4 F5 F6
4.25 9 9 4.25 9 9 9 10
(GHz)
Wavelength
700-1650 700-1650 700-1650 700-1650 700-1650 700-1650 700-1650 700-1650
Range (nm)
Fibre Input
9 or 50 or 62.5 9 or 50 or 62.5 9 or 50 or 62.5 9 or 50 or 62.5 9 or 50 or 62.5 9 or 50 or 62.5 9 or 50 or 62.5 9 or 50 or 62.5
(μm)
Mask Test
–19 –19 –19 –19 –19 –19 –19 –14
Sensitivity
(dBm)
Number of
11111111
Channels
Rates Supported: ■=Filter, ♦=Optical Clock Recovery, ⊕=Electrical Clock Recovery
155 Mb/s
622 Mb/s
1063 Mb/s
■■
1250 Mb/s
2125 Mb/s
■■■■ ■
2488 Mb/s
2500 Mb/s
3.125 Gb/s
3.188 Gb/s
■■■■
■■■■
3.32 Gb/s
4.25 Gb/s
8.5 Gb/s*
5
■■ ■■
■■ ■■■■
9.95 Gb/s
10.31 Gb/s*
5
10.52 Gb/s
10.66 Gb/s
10.71 Gb/s
11. 1 G b /s
11. 3 G b /s
*3With 80A05 or 80A07.
4
With 80A05 Option 10G or 80A07.
*
5
*
Draft version of the 8.5GFC fi lter. T11 committee redefined this filter at the April 2008 meeting. New 8.5GFC filter, as defined in ANSI FC-PI-4 (Rev 8),
Option 10G modules only; and is identified as 10GBase-R.
80C12
FC 10G CR*
3
CR*
♦♦
♦♦
♦♦
♦♦
♦♦
♦♦
♦♦
♦♦
♦♦
■
♦♦
♦♦
80A07
■
■
■
■
■
■
■
is identical to the 10GBase-R 10.313G filter and is available for 80C12
♦
♦
♦
♦
♦
♦
♦
4
4 www.tektronix.com
Loading...