xx
80C00 and 80E00 Series
ZZZ
Optical and Electrical Sampling Modules
User Manual
*P071305901*
071-3059-01
xx
80C00 and 80E00 Series
ZZZ
Optical and Electrical Sampling Modules
User Manual
www.tektronix.com
071-3059-01
Copyright © Tektronix. All rights reserved. Licensed software products are owned by Tektronix or its subsidiaries
or suppliers, and are protected by national copyright laws and international treaty provisions.
Tektronix products are covered by U.S. and foreign patents, issued and pending. Information in this publication
supersedes that in all previously published material. Specifications and price change privileges reserved.
TEKTRONIX and TEK are registered trademarks of Tektronix, Inc.
Contacting Tektronix
Tektronix, Inc.
14150 SW Karl Braun Drive
P.O. B o x 5 0 0
Beaverto
USA
For product information, sales, service, and technical support:
n, OR 97077
In North America, call 1-800-833-9200.
Worl dwid e, vis it www.tektronix.com to find contacts in your area.
Warranty
Tektronix warrants that this product will be free from defects in materials and workmanship for a period of one (1)
year from the date of shipment. If any such product proves defective during this warranty period, Tektronix, at its
option, either will repair the defective product without charge for parts and labor, or will provide a replacement
in exchange for the defective product. Parts, modules and replacement products used by Tektronix for warranty
work may be n
the property of Tektronix.
ew or reconditioned to like new performance. All replaced parts, modules and products become
In order to o
the warranty period and make suitable arrangements for the performance of service. Customer shall be responsible
for packaging and shipping the defective product to the service center designated by Tektronix, w ith shipping
charges prepaid. Tektronix shall pay for the return of the product to Customer if the shipment is to a location within
the country in which the Tektronix service center is located. Customer shall be responsible for paying all shipping
charges, duties, taxes, and any other charges for products returned to any other locations.
This warranty shall not apply to any defect, failure or damage caused by improper use or improper or inadequate
maintenance and care. Tektronix shall not be obligated to furnish service under this warranty a) to repair damage
result
b) to repair damage resulting from improper use or connection to incompatible equipment; c) to repair any damage
or malfunction caused by the use of non-Tektronix supplies; or d) to service a product that has been modified or
integrated with other products when the effect of s uc h modification or integration increases the time or difficulty
of servicing the product.
THIS WARRANTY IS GIVEN BY TEKTRONIX WITH RESPECT TO THE PRODUCT IN LIEU OF ANY
OTHER WARRANTIES, EXPRESS OR IMPLIED. TEKTRONIX AND ITS VENDORS DISCLAIM ANY
IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
TRONIX' RESPONSIBILITY TO REPAIR OR REPLACE DEFECTIVE PRODUCTS IS THE SOLE
TEK
AND EXCLUSIVE REMEDY PROVIDED TO THE CUSTOMER FOR BREA CH OF THIS WARRANTY.
TEKTRONIX AND ITS VENDORS WILL NOT BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL,
OR CONSEQUENTIAL DAMAGES IRRESPECTIVE OF WHETHER TEKTRONIX OR THE VENDOR HAS
ADVANCE NOTICE OF THE POSSIBILITY OF SUCH DAMAGES.
[W2 – 15AUG04]
btain service under this warranty, Customer must notify Tektronix of the defect before the expiration of
ing from attempts by personnel other than Tektronix representatives to install, repair or service the product;
Table of Contents
Compliance information ........................................................................................... ii
General safety summary ...................................................................................... ii
EMC compliance ......... ................................ .................................. ................... ii
Environmen
Preface ............................................................................................................... v
Related documents...... ................................ ................................ ....................... v
Getting started..... . ..... . ..... . ..... . .... . . .... . . .... . ..... . ..... . ..... . ..... . ..... . ..... . ..... . ..... . ... . . ..... . ... 1
Handle modules to prevent electrostatic damage................ ................................ ........... 1
Module, instrument, and software compatibility ..... . .... . . .... . ..... . ..... . ... . . ..... . ..... . ... . . . .... . .. 2
Typical
Install or remove a module ................................................................................... 4
Verify module install ......... ................................ ................................ ................. 5
Operating basics ............. ................................ .................................. ..................... 7
Using the module to take measurements .................................................................... 7
Module controls and indicators ............. ................................ ................................ . 7
ecting optical signals ............... ................................ ................................ ..... 8
Conn
Connecting electrical signals ........................ ................................ ......................... 9
Remote module mounting . ................................ .................................. ................ 10
Cleaning the module .............................................................................................. 13
Cleaning optical connectors ...................................................................................... 14
Appendix A: Module, instrument, and software compatibility . ... . . . .... . ..... . ..... . .... . ..... . ..... . .... . . 17
A8300 instrument software and module compatibility .. . ..... . .... . ..... . ..... . ..... ..... . ..... . .... 17
DS
Legacy instrument software and module compatibility .... . ..... . ..... . ..... . .... . ..... . ..... . ..... . ... . 18
Appendix B: Accessories and options........................................................................... 19
Appendix C: Electrical connector torque settings.. ................................ ............................ 23
Index
tal considerations............................................................................... iii
module configurations ............ ................................ .................................. . 3
80C00, 80E00 Sampling Modules User Manual i
Compliance information
Compliance in
formation
General safety summary
As the modul
instrument, see the primary instrument user documentation for general safety
summary information.
Ground the product. This product is indirectly grounded through the grounding
conductor of the mainframe power cord. To avoid electric shock, the grounding
conducto
the input or output terminals of the product, ensure that the product is properly
grounded.
EMC compliance
As the modules covered in the manual are for use only when installed in the main
instrument, see the primary instrument user documentation for EMC compliance
information.
es covered in the manual are for useonlywheninstalledinthemain
r must be connected to earth ground. Before making connections to
ii 80C00, 80E00 Sampling Modules User Manual
Environmental considerations
This section provides information about the environmental impact of the product.
Compliance information
Product end-of-life
handling
Restriction of hazardous
substances
Observe the f
Equipment recycling. Production of this equipment required the e xtraction and
use of natural resources. The equipment may contain substances that could be
harmful to the environment or human health if improperly handled at the product’s
end of life. To avoid release of such substances into the environment and to
reduce the
an appropriate system that will ensure that most of the materials are reused or
recycled appropriately.
This pr
and is not required to comply with the substance restrictions of the recast RoHS
Directive 2011/65/EU until July 22, 2017.
ollowing guidelines when recycling an instrument or component:
use of natural resources, we encourage you to recycle this product in
This symbol indicates that this product complies with the applicable European
Union re
on waste electrical and electronic equipment (WEEE) and batteries. For
information about recycling options, check the Support/Service section of the
Tekt r on
oduct is classified as an industrial monitoring and control instrument,
quirements according to Directives 2002/96/EC and 2006/66/EC
ixWebsite(www.tektronix.com).
80C00, 80E00 Sampling Modules User Manual iii
Compliance information
iv 80C00, 80E00 Sampling Modules User Manual
Preface
Related documents
This document describes how to install and verify operation of an optical
(80C00 series) or electrical (80E00 series) sampling module for use in
the DSA8300 D
Legacy instruments include the TDS/CSA/DSA8200, TDS/CSA8000B, and
TDS/CSA8000 series instruments.
This module is a part of a larger instrument system. Measurement-related settings,
such as signal acquisition, standards selection, filters, vertical scaling, and
horizontal sampling rate, are set from the main instrument Setup c ontrols. The
parameters available depend on the modules installed in the instrument.
See the instrument online help and documentation for information on setting up
and taking measurements, instrument specifications, programming commands,
and per
these documents from the Tektronix Web site (www.tek.com/downloads).
formance verification procedures. You can download the latest version of
igital Serial Analyzer and supported legacy instruments.
DSA83
DSA8300 Programmer Manual
DSA8300 Specification Technical Re ference
DSA8300 Service Technical Reference
DSA8300 Performance Verification Technical Reference
For legacy instruments (TDS/CSA/DSA8200, TDS/CSA8000B, and
TDS/CSA8000), go to www.tek.com/downloads and search for the manual for
your instrument.
00 Digital Serial Analyzer Quick Start User Manual
80C00, 80E00 Sampling Modules User Manual v
Loading...