Tektronix 650-4643-00 User guide

650-4643-00
Removable Hard Disk Drive
Assembly for AWG520 Option11
User guide

Product Overview

Tektronix Removable Hard Disk Drive Assembly
650-4643-00 is designed for exclusive use for the
AWG520 option 11 Arbitrary Waveform Generator.

Preparation for Use

 Power of f the AWG520 when you remove or insert a

disk assembly.

071-1501-00

*P071150100*

071150100

Copyright Notices

Copyright © Tektronix, Inc. All rights reserved.

Safety Summary

Only qualified personnel should perform service procedures.

To Avoid Fire or Personal Injury

Do Not Operate Without Covers.

Do not operate this product with covers or panels removed.

Avoid Exposed Circuitry.

Do not touch exposed connections and components when
power is present.

Do Not Operate With Suspected Failures.

If you suspect there is damage to this product, have it inspected
by qualified service personnel.

 The AWG520 does not start up without a disk

assembly.

 Use only the disk assembly and drive specified for

this product.

 Do not attempt to substitute any other Tektronix

removable hard disk drive assembly that is not
specified for the AWG520 option 11.

NOTE. Refer to the AWG520 Arbitrary Waveform

Generator User manual for more information on the
AWG520.

Installation Instructions

CAUTION. Be fore you remove or insert a disk

assembly, make sure that the instrument is
powered off.

Remove a removable hard disk assembly

1. T o release a remov able hard disk assembly , push the

release button then pull and extend the eject knobs to
the outside.

Do Not Operate In Wet/Damp Conditions.

Do Not Operate In An Explosive Atmosphere.

Keep Product Surfaces Clean and Dry.

Provide Proper Ventilation.

Refer to the manual’s installation instructions for details on
installing the product so it has proper ventilation.

2. Holding the eject knobs, pull out a removable hard

disk assembly calmly.

650-4643-00 Removable hard disk drive User Guide 1

Insert a removable hard disk assembly

1. Check that the eject knobs are released.

2. Insert a removable hard disk assembly firmly

according to the guide of a removable hard disk
assembly bay.

3. Push the eject knobs to lock a removable hard disk

assembly.

Storage a removable hard disk assembly

A hard disk drive is extremely susceptible to
static-discharge damage, shock, dust and so on. When
you keep a removable hard disk assembly simple
substance, please put it into an anti-static plastic bag to
prevent it from those damages.

WARRANTY SUMMARY

Tektronix warrants that the products that it manufactures and sells
will be free from defects in materials and workmanship for a period
of one (1) year from the date of shipment. If a product proves

defective within the respective period, Tektronix will provide repair
or replacement as described in the complete warranty statement.

To arrange for service or obtain a copy of the complete warranty
statement, please contact your nearest Tektronix sales and service
office.

EXCEPT AS PROVIDED IN THIS SUMMARY OR THE
APPLICABLE WARRANTY STATEMENT, TEKTRONIX
MAKES NO WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING WITHOUT LIMITATION THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT
SHALL TEKTRONIX BE LIABLE FOR INDIRECT , SPECIAL
OR CONSEQUENTIAL DAMAGES.

2 650-4643-00 Removable hard disk drive User Guide