Accessories Home
Product Portfolio
Probes
Optical Products
Application Software
Network Interface
Scope Accessories
Meter Accessories
Lookup By Name
Resources For You
Application Notes
Support Tools
Service
What's New
News & Events
Contact Us
Feedback
Where To Buy
P6205 - P6205 with Accessories.
Features
Specs
Ordering Information
Pricing Information
Request a Quote
Active FET Probes
P6205 * 1103
Features
P6205
DC to 750 MHz●
2 pF Input C●
1 Megaohm Input R●
Low Price●
Integral Probe Power TEKPROBE BNC●
1103
Powers up to Two Probes●
For Use with P6203, P6205, P6231, P6243, P6245,
P6701B, P6703B, P6711, P6713, P6723, P6246, P6247,
P6248, P6249, P5205, P5210, ADA400A on
NonTEKPROBE Tektronix Interfaced Scopes*
1
●
Overload Protected●
Applications
High-speed Digital Systems Design
ECL
❍
GaAs❍
MOS: CMOS; FastCMOS; BiCMOS; TTL❍
●
Component Design/Characterization
Amplitude levels
❍
Aberrations❍
Propagation Delay and Timing❍
Bandwidths and Rise Times❍
●
Educational Research●
Manufacturing Engineering and Test●
Active FET Probes for TEKPROBE BNC Interface
The P6205 Probe is part of Tektronix' line of Low Circuit
Loading Signal Acquisition probes for CSA (Communications
Signal Analyzers), DSA (Digitizing Signal Analyzers), 11000
Series and the TDS Family of Oscilloscopes.
The P6205 is designed with FET devices for its inputs, which
allows very high input resistance values and low input
capacitances.
1103 - 1103 TEKProbe Power
Supply.
The P6205 provides low input capacitance and high input
resistance performance at a budget price.
Both Active FET probes provide a wide linear dynamic input
range for accessing most digital device families using today's
logic voltage levels.
Power for the P6205 is supplied by the CSA, DSA, TDS and
11000 Series mainframes through the TEKPROBE BNC
Interface, eliminating the need for extra cabling and/or external
power supplies.*
2
Probe information such as type, serial number, attenuation
factor, offset scale factor, input resistance and termination
resistance required is communicated through the TEKPROBE
Interface between the Active Probe and the CSA, DSA and
11000 Series mainframes. This information is used by these
oscilloscope mainframes during the scope initialization
sequence and measurement analysis.
This active probe may also be use with 50 Ohm or 1 megaohm
oscilloscope systems, with conventional BNC interfaces, via the
Tektronix 1103 TEKPROBE
®
Power Supply. The 1103 has dual
TEKPROBE power supply inputs, dual BNC signal outputs and
dual voltage offset on/off switches and potentiometers.
Benefit Highlights
Low Input C, High Input R - Minimizes circuit under
test loading
●
Probe Power Directly from CSA, DSA, TDS or 11000
Series TEKPROBE BNC Interfaces - Means no
additional cables or power supplies required*
2
●
Variable DC Offset (Except P6205) - Allows correction
for DC levels to bring the signal into the probe's dynamic
measurement range
●
Readout Coding for 10X Attenuation - Reduces
confusion and errors in measurement readings
●
Gold-plated Replaceable Probe Tips - Improved
electrical connections and lower maintenance costs
●
Miniature Size Accessories - Provides wide range of
circuit attachments
●
UL Listed - Third party certification for safe operation●
*1 The characteristics for TEKPROBE Interface probes are
subject to change when used with the 1103 TEKPROBE Power
Supply. Bandwidth, Rise-time, Propagation Delays will
generally differ from the advertised specification of the Probe
Only.
*2 To use these TEKPROBE BNC Interface Probes on the
11800 or CSA800 Series requires an 1103 TEKPROBE Power
Supply, an SMA Male to BNC Female adapter and a 50 Ohm
BNC cable.
Top of Page
Features
Specs
Ordering Information
Pricing Information
Request a Quote
Tektronix Measurement products are
manufactured in ISO registered facilities.
P6205 Exempt
49A-10733-4p517, 06/1997, 08/03/2000
Tektronix Site
Home | Products | Support | Sitemap | Search
© Copyright Tektronix, Inc | webmaster@tek.com
Quick Links
GO
Loading...