016-2124-00 RSA7100A Rackmount Kit Instructions
Item Description Quantity
1
2
3 Rear mounting bracket 2
4
5
6 M4 x 8 Flathead screws 8
7
8 Panhead screws 8
9 Front mounting bracket 2
10
Side feet (on instrument, not in kit)
8/32 Flathead screws
Rear mounting flange
8/32 flange nuts
Bottom feet (on instrument, not in kit)
Securing screws for rack (on rack, not in kit)
6
2
6
This rackmount kit allows you to install the RSA7100A into a 3U rack. The
following steps show you how to install the rackmount kit onto the instrument.
www.tek.com
Copyright © Tektronix
*P071350900*
071-3509-00
016-2124-00 RSA7100A Rackmount Kit Instructions
1. Remove the side
the RSA7100A (instrument) chassis.
2. Install one re
eight M4 x 8 screws [6].
3. Attach the fl
six flange nuts [5].
4. Install one
eight Panhead screws [8].
5. Install th
come with your rack.
e RSA7100A into the rack using eight securing screws [10] that
[1] and bottom [7] feet (as required for your rack) from
ar mounting bracket [3] on each side of the chassis using the
anges [4] to the rear brackets [3] using the six 8/32 screws and
front mounting bracket [9] on each side of the chassis using the
2
Loading...