TEKTELIC Communications Kona Micro User Manual

TEKTELIC COMMUNICATIONS INC.

Document type:

User Guide

Document number:

T0005281_UG

Document version:

0.14

Document Status:

Approved

Product name:

Kona Micro Indoor Gateway

Product codes:

See Table 1

TEKTELIC Communications Inc.
7657 10th Street NE
Calgary, AB, Canada T2E 8X2
Phone: [phone]

© 2018 TEKTELIC Communications Inc., All rights reserved.

All products, names and services are trademarks and registered trademarks of their respective companies.

Disclaimer:

Material contained in this document is subject to change without notice. The material herein is solely for
information purposes and does not represent a commitment by TEKTELIC or its representatives. TEKTELIC has
prepared the information contained in this document solely for use by its employees, agents, and customers.
Dissemination of this information and/or concepts to other parties is prohibited without the prior written consent
of TEKTELIC. In no event will TEKTELIC be liable for any incidental or consequential damage in connection with the
furnishing, performance or use of this material.

TEKTELIC reserves the right to revise this publication in accordance with formal change control procedures defined
by TEKTELIC.

Revision History

Version

Date

Status

Editor

Comments

0.1

Feb 7, 2018

Draft

H. Agus

First release

0.11

Feb. 14, 2018

Draft

T. Danshin

Reduced content to that required
specifically for regulatory filings

0.12

Feb. 23, 2018

Approved

T. Danshin

Updated MPE information in compliance
section. Removed references to GPS
functionality

0.13

Feb. 23, 2018

Approved

T. Danshin

Updated Antenna information in
compliance section

0.14

March 1,

2018

Approved

Z. Herasymiuk

Updated Compliance section

Kona Micro Indoor User Guide T0005281_UG Version 0.12
TEKTELIC Communications Inc. Confidential Page 2 of 23

Table of Contents

1 Product Description ................................................................................................................. 4

Overview .......................................................................................................................... 4

Physical Interfaces ............................................................................................................ 6

Specifications.................................................................................................................... 7

2 Installation ............................................................................................................................... 8

Safety Precautions ............................................................................................................ 8

Unpacking and Inspection ................................................................................................ 9

Required Equipment for Installation ................................................................................ 9

Kona Micro Indoor Gateway Mounting ........................................................................... 9

Direct DC Power Cable Installation ................................................................................ 11

RF Cable Installation ....................................................................................................... 11

Copper Ethernet Cable Installation ................................................................................ 11

3 Radio Compliance Statements .............................................................................................. 12

4 Description du produit........................................................................................................... 14

aperçu ............................................................................................................................. 14

Interfaces physiques ...................................................................................................... 16

Spécifications.................................................................................................................. 17

5 Installation ............................................................................................................................. 18

Précautions de sécurité .................................................................................................. 18

Déballage et inspection .................................................................................................. 19

Matériel requis pour l'installation .................................................................................. 19

Montage de la passerelle intérieure Kona Micro .......................................................... 19

Installation directe du câble d'alimentation CC ............................................................. 21

Installation du câble RF .................................................................................................. 21

Installation du câble Ethernet en cuivre ........................................................................ 21

6 Déclarations de conformité radio .......................................................................................... 22

Kona Micro Indoor User Guide T0005281_UG Version 0.12
TEKTELIC Communications Inc. Confidential Page 3 of 23

1 Product Description

Product Code

Description

RF Region

T0005204

LORA GATEWAY MODULE, KONA MICRO, INDOOR, NA

NORTH AMERICA

T0005203

LORA GATEWAY MODULE, KONA MICRO, INDOOR, NA, BATTERY BACKUP

NORTH AMERICA

T0004855

LORA GATEWAY MODULE, KONA MICRO, INDOOR, NA, LTE MODEM

NORTH AMERICA

T0005126

LORA GATEWAY MODULE, KONA MICRO, INDOOR, NA, LTE MODEM, BATTERY BACKUP

NORTH AMERICA

Overview

The Kona Micro Indoor Gateway is an Indoor LoRaWAN IoT gateway that supports the full range
of LoRa WAN channels. The Gateway supports one external LoRa antenna, direct DC input power,
and two backhaul options including copper Ethernet or 3G/4G wireless.

Table 1 presents the currently available Kona Micro Indoor Gateway models.

Table 1: Kona Micro Indoor Gateway Models

Figure 1 illustrates the Kona Micro Indoor Gateway external form-factor with the front view on
the top and rear view on the bottom. All models share the same mechanical form-factor.

Kona Micro Indoor User Guide T0005281_UG Version 0.12
TEKTELIC Communications Inc. Confidential Page 4 of 23

Kona Micro Indoor User Guide T0005281_UG Version 0.12
TEKTELIC Communications Inc. Confidential Page 5 of 23

Figure 1: Kona Micro Indoor Gateway

Physical Interfaces

Interface

Connector Type

Mating Connector

LoRa Antenna Ports

Reverse SMA female

Industry standard Reverse SMA male

Direct DC Power Input Port

DC Power Jack, 3 pin,

5.5 mm barrel, 2mm pin

DC Barrel connector-straight plug

2.1 mm (inner), 5.5 mm (outer)

12VDC Tip positive

Ethernet Port

RJ-45

Industry standard RJ45 cable

DC Power

LoRa RF

Antenna

Ethernet

Figure 2 illustrates the connector layout for the Kona Micro Indoor Gateway.

Figure 2: Kona Micro Indoor Gateway Bulkhead Layout

The indoor Gateway connectors are listed in Table 2.

Table 2: Kona Micro Indoor Gateway Interface Connector Types

Kona Micro Indoor User Guide T0005281_UG Version 0.12
TEKTELIC Communications Inc. Confidential Page 6 of 23

Specifications

Attribute

Specification

Dimensions

120 (L) x 118 (W) x 41.5 (H) mm

Weight

336 g / 0.74 lbs (with battery); 245 g / 0.54 lbs( without battery)

Operating Temperature

0°C to 40°C

Relative Humidity

5 to 95 %RH

Operating Altitude

-60 m to 4,000 m (-197 ft to 13,123 ft)

Power Input, Direct DC
12VDC, 2.5A, Tip Positive

Power Consumption

20 W maximum

Weather Tightness

TBD

Regulatory Compliance

CSA/UL 60950-1 & CSA/UL 60950-22, CE IEC 60950-1

FCC Pt. 15, RSS-247, EN 301 489-1

Surge Protection

Indoor use only; do not connect outdoor antennas/cables.

The Kona Micro Indoor Gateway specifications are listed in Table 3.

Table 3: Kona Micro Indoor Gateway Specifications

Kona Micro Indoor User Guide T0005281_UG Version 0.12
TEKTELIC Communications Inc. Confidential Page 7 of 23