TEKTELIC Communications Kona Mega Gateway Quick Start Manual

c ommunications

Lucinda Grande Bold & Myriad Pro Condensed

Quick Start Guide: Kona Mega Gateway

version:

1.0

TEKTELIC Communications Inc.

TEKTELIC Communications Inc.

TEKTELIC Communications Inc. 7657 10th Street NE Calgary, AB, Canada T2E 8X2

Phone: [phone]

Document type: Quick Start Guide
Document number: T0004279_QS
Document version: 1.0
Product name: Kona Mega Gateway

2

All products, names and services are trademarks and registered trademarks of their respective companies.

Disclaimer:

Material contained in this document is subject to change without notice. The material herein is solely for in­formation purposes and does not represent a commitment by TEKTELIC or its representatives. TEKTELIC has
prepared the information contained in this document solely for use by its employees, agents, and customers.
Dissemination of this information and/or concepts to other parties is prohibited without the prior written con­sent of TEKTELIC. In no event will TEKTELIC be liable for any incidental or consequential damage in connection
with the furnishing, performance or use of this material.

TEKTELIC reserves the right to revise this publication in accordance with formal change control procedures

dened by TEKTELIC.

Kona Mega Quick Start Guide T0004279_QS Version 1.0

TEKTELIC Communications Inc.

Condential: © 2018 TEKTELIC Communications Inc., All rights reserved.

Quick Start Guide: Kona Mega Gateway version: 1.0 Page 2

TEKTELIC Communications Inc.

Table of Contents

3

Introduction 3
What is in the Box 4
Product and installation material 4
Quick Start Setup 5
Required Equipment 5
Quick Start Procedure 5
LED States 11
Troubleshooting Tips 13
Can’t install/launch the KonaFT 13
KonaFT can’t connect with Mega Gateway 13
LED remains Flashing Green 13
Finding out Gateway’s IP address 13
GPS – No Lock 13

Introduction

3G/4G 13
References 14

This guide provides step by step instruc­tions and troubleshooting tips for users to
setup their Gateway quickly and correctly
with a Network Server.

Quick Start Guide: Kona Mega Gateway version: 1.0 Page 3

4

TEKTELIC Communications Inc.

1. What is in the Box

Product and installation material

Note: For other Kona Mega models and eld installation instructions, refer to Kona Mega User
Guide T0004279_UG.

Figure 1: Equipment inside the Box

a. Kona Mega Gateway

b. Wall Mounting Bracket and Screws

c. Power Cable

d. Ground Cable

e. RJ-45 Cable Weatherproof Adapter

f. User Guide

g. Declaration of Conformance (EU versions only)

Quick Start Guide: Kona Mega Gateway version: 1.0 Page 4

TEKTELIC Communications Inc.

2. Quick Start Setup

Required Additional Equipment:

The following equipment is required for commissioning, setup, and monitoring of the
Kona Mega Gateway.

− Laptop running Windows XP/Vista/7

− KonaFT self-extracting installer (software)

− Kona Mega Gateway

− Cat5 or better Ethernet cable

− RF antenna(s) for LoRa communication

− GPS antenna

− 3G/4G antenna (if applicable)

− DC Power Supply (48VDC and Current Should be 1A or greater) or POE++
(support 56VDC output and can supply 0.8A or greater of current.)

5

Quick Start Guide: Kona Mega Gateway version: 1.0 Page 5