Teksilon ADX1300 Users manual

Industrial Computing Solutions

Embedded Computing
ADX1300

User Manual

Preface

Preface

Copyright

This publication, including all photographs, illustrations and software, is
protected under international copyright laws, with all rights reserved. No

part of this manual may be reproduced, copied, translated or transmitted in
any form or by any means without the prior written consent from NEXCOM
International Co., Ltd.

Disclaimer

The information in this document is subject to change without prior notice and
does not represent commitment from However,

users may update their knowledge of any product in use by constantly checking
its manual posted on our website: http://www.nexcom.com. NEXCOM shall
not be liable for direct, indirect, special, incidental, or consequential damages
arising out of the use of any product, nor for any infringements upon the rights
of third parties, which may result from such use. Any implied warranties of
merchantability or fitness for any particular purpose is also disclaimed.

Acknowledgements

ADX1300 is a trademark of All other product
names mentioned herein are registered trademarks of their respective

owners.

Regulatory Compliance Statements

This section provides the FCC compliance statement for Class B devices and
describes how to keep the system CE compliant.

Declaration of Conformity

FCC

This equipment has been tested and verified to comply with the limits for
a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are

designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference
to radio communications. Operation of this equipment in a residential area
(domestic environment) is likely to cause harmful interference, in which
case the user will be required to correct the interference (take adequate
measures) at their own expense.

CE

The product(s) described in this manual complies with all applicable
European Union (CE) directives if it has a CE marking. For computer systems

to remain CE compliant, only CE-compliant parts may be used. Maintaining
CE compliance also requires proper cable and cabling techniques.

Copyright © 2014 All Rights Reserved.

iv

ADX1300 User Manual

Preface

RoHS Compliance

NEXCOM RoHS Environmental Policy and Status
Update

NEXCOM is a global citizen for building the digital
infrastructure. We are committed to providing green

products and services, which are compliant with
European Union RoHS (Restriction on Use of Hazardous Substance in
Electronic Equipment) directive 2011/65/EU, to be your trusted green
partner and to protect our environment.

RoHS restricts the use of Lead (Pb) < 0.1% or 1,000ppm, Mercury (Hg)
< 0.1% or 1,000ppm, Cadmium (Cd) < 0.01% or 100ppm, Hexavalent
Chromium (Cr6+) < 0.1% or 1,000ppm, Polybrominated biphenyls (PBB) <

0.1% or 1,000ppm, and Polybrominated diphenyl Ethers (PBDE) < 0.1% or
1,000ppm.

In order to meet the RoHS compliant directives, NEXCOM has established an
engineering and manufacturing task force in to implement the introduction
of green products. The task force will ensure that we follow the standard
NEXCOM development procedure and that all the new RoHS components
and new manufacturing processes maintain the highest industry quality
levels for which NEXCOM are renowned.

The model selection criteria will be based on market demand. Vendors and
suppliers will ensure that all designed components will be RoHS compliant.

Copyright © 2014 All Rights Reserved.

How to recognize NEXCOM RoHS Products?

For existing products where there are non-RoHS and RoHS versions, the
suffix “(LF)” will be added to the compliant product name.

All new product models launched after January 2013 will be RoHS compliant.
They will use the usual NEXCOM naming convention.

v

ADX1300 User Manual

Preface

Warranty and RMA

NEXCOM Warranty Period

NEXCOM manufactures products that are new or equivalent to new in
accordance with industry standard. NEXCOM warrants that products will

be free from defect in material and workmanship for 2 years, beginning on
the date of invoice by NEXCOM. HCP series products (Blade Server) which
are manufactured by NEXCOM are covered by a three year warranty period.

NEXCOM Return Merchandise Authorization (RMA)

▪

Customers shall enclose the
returned packages.

▪

Customers must collect all the information about the problems
encountered and note anything abnormal or, print out any on-screen

messages, and describe the problems on the
Form” for the RMA number apply process.

▪

Customers can send back the faulty products with or without accessories
(manuals, cable, etc.) and any components from the card, such as CPU

and RAM. If the components were suspected as part of the problems,
please note clearly which components are included. Otherwise, NEXCOM
is not responsible for the devices/parts.

▪

Customers are responsible for the safe packaging of defective products,
making sure it is durable enough to be resistant against further damage

and deterioration during transportation. In case of damages occurred
during transportation, the repair is treated as “Out of Warranty.”

▪

Any products returned by NEXCOM to other locations besides the

customers’ site will bear an extra charge and will be billed to the customer.

“NEXCOM

RMA Service

“NEXCOM

Form”

with the

RMA Service

Copyright © 2014 All Rights Reserved.

Repair Service Charges for Out-of-Warranty Products

NEXCOM will charge for out-of-warranty products in two categories, one is
basic diagnostic fee and another is component (product) fee.

Repair Service Charges for Out-of-Warranty Products

NEXCOM will charge for out-of-warranty products in two categories, one is
basic diagnostic fee and another is component (product) fee.

System Level

▪

Component fee: NEXCOM will only charge for main components such as
SMD chip, BGA chip, etc. Passive components will be repaired for free,
ex: resistor, capacitor.

▪

Items will be replaced with NEXCOM products if the original one cannot
be repaired. Ex: motherboard, power supply, etc.

▪

Replace with 3rd party products if needed.

▪

If RMA goods can not be repaired, NEXCOM will return it to the customer
without any charge.

Board Level

▪

Component fee: NEXCOM will only charge for main components, such
as SMD chip, BGA chip, etc. Passive components will be repaired for free,
ex: resistors, capacitors.

▪

If RMA goods can not be repaired, NEXCOM will return it to the customer
without any charge.

vi

Preface

Warnings

Read and adhere to all warnings, cautions, and notices in this guide and
the documentation supplied with the chassis, power supply, and accessory
modules. If the instructions for the chassis and power supply are inconsistent
with these instructions or the instructions for accessory modules, contact
the supplier to find out how you can ensure that your computer meets
safety and regulatory requirements.

Cautions

Electrostatic discharge (ESD) can damage system components. Do the
described procedures only at an ESD workstation. If no such station is

available, you can provide some ESD protection by wearing an antistatic
wrist strap and attaching it to a metal part of the computer chassis.

Copyright © 2014 All Rights Reserved.

vii

ADX1300 User Manual