Teknofun 811107, 811207, 811208 User Manual

1

811107 811207 811208

DIGITAL ALARM CLOCK

USER MANUAL

BEFORE OPERATING THIS PRODUCT, READ, UNDERSTAND, AND FOLLOW
THESE INSTRUCTIONS. BE SURE TO SAVE THIS BOOKLET FOR FUTURE
REFERENCE.

THE EXCLAMATION POINT
WITHIN AN EQUILATERAL
TRIANGLE IS INTENDED TO
ALERT THE USER OF THE
PRESENCE OF IMPORTANT
OPERATING AND
MAINTENANCE (SERVICING)
INSTRUCTIONS IN THE
LITERATURE ACCOMPANYING
THE APPLIANCE.

The Lightning flash with
arrowhead symbol, with an
equilateral triangle is intended to
alert the user of the presence of
uninsulated dangerous voltage

within the product’s enclosure that

may be of sufficient magnitude to
constitute a risk of electric shock to
persons.

CAUTION: TO REDUCE THE RISK
OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO
USER SERVICEABLE PARTS
INSIDE. REFER SERVICING TO
QUALIFIED SERVICE
PERSONNEL.

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG. TO WIDE
SLOT, FULLY INSERT.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THE
APPLIANCE TO RAIN OR MOISTURE.

2

LOCATION OF CONTROLS

1. Zz LED indicator

2. PM LED indicator

3. LED indicator

4. LED indicator

5. FM LED indicator

6. SNOOZE/DIMMER button

7. button

8. button

9. button

10. │◄ ◄ button

11. ►►│ button

12. STANDBY button

13. MEM/SCAN button

14. DC Jack

CLOCK SETTING

1. In STANDBY OFF mode, press and hold the Button, the LED will blink on the display.

2. Press │◄ ◄ Button to set the desired hour.

3. Press ►►│ button to set the desired minute.

4. After the desired time has set, press button to confirm.

3

ALARM 1 SETTING

1. Keep the unit in STANDBY OFF mode.

2. Press and hold the button, indicator and LED will blink on the display.

3. Press │◄ ◄ button to set the desired alarm hour.

4. Press ►►│ button to set the desired alarm minute.

5. Press button again, then press the │◄ ◄ button or the ►►│ button to choose the
alarm sound (Buzzer/FM).

6. Then press the button to confirm, the indicator will light up.

ALARM 2 SETTING

Process is the same as Alarm 1 setting. But press the button instead of button.

SNOOZE FUNCTION

If you want to snooze a few more minutes, pressing the SNOOZE button will deactivate the alarm
sound for 9 minutes.

SHUT OFF ALARM

1. When alarm goes on, press the STANDBY button to turn off alarm. The alarm will reset for
next day (24 hours later).

2. To turn off the alarm completely (not reset for next day), press the or button
repeatedly until the / indicators disappear.

DIMMER FUNCTION

In normal status (not in alarm status), press and hold the SNOOZE/DIMMER button to set the
brightness level of the LED segments as desired.

RADIO OPERATION

1. Press STANDBY button to turn on the unit.

2. Press the FUNC button repeatedly until the FM frequency will appear on the display.

3. To search for the previous/next available radio station, press and hold the │◄ ◄ or ►►│

buttons until the displayed frequency starts running, then release the button. (When a radio
station is found, the frequency on display will stop running and start playback automatically).
To stop during searching, press the │◄ ◄ or ►►│ button again. (If reception is not good,
press the │◄ ◄ or ►►│ button repeatedly to fine tune).

4. Adjust the volume to the desired level by pressing or button

5. When finished listening, press the STANDBY button to turn the unit to off (standby) mode.