Teknique T58002 Instruction Manual
Instruction manual
HOME ENTERTAINMENT
B L A C K W I R E L E S S H E A D P H O N E S
T58002
TO:
CUSTOMER SERVICES DEPARTMENT
TEKNIQUE
SUTTON HOUSE
BERRYHILL ROAD,
FENTON
STOKE ON TRENT
ST4 2NL
Please place post-
age stamp here
HOME ENTERTAINMENT
This product is guaranteed for 12 months from the date of the original
purchase
.
If any defect arises due to faulty materials or workmanship the faulty products
must be returned to the place of purchase.
Refunds or replacement is at the discretion of the Retailer.
The following conditions apply:
The product must be returned to the retailer with the proof of purchase.
The product must be installed and used in accordance with the instructions
contained
in this instruction guide.
For domestic purposes. ONLY.
It does not cover wear and tear, damage, misuse or consumable parts.
PFD has limited responsibility for incidental or consequential loss or damage.
Valid in the UK and Eire only.
Parts Identication
Guarantee
B Transmitter
7. Power indicator (front )
8. Power and function switch
9. Microphone socket (MIC)
10. Power socket (4.5V DC)
11. Audio cable of Transmitter
12. Battery compartment cover
(bottom)
A Receiver
1. Battery compartment cover
2. Volume control and power button
(ON/OFF)
3. Scan key (SCAN )
4. Reset key (RESET )
5. Power indicator
6. Audio socket
Technical Specications
Transmitter
Transmitter frequency: 88.7 + 0.2MHZ
Modulation mode: FM
Emission distance: > 8m
Reception from any audio and visual
equipment
with audio out socket, such asTV set,
audio device,
DVD/VCD player, multimedia PC…etc.
Power supply: 2 X AAA 1.5V batteries
4.5V DC
The applied bandwidth: 200 K.
Antenna gain: 0.1dB
Receiver
Frequency range: 88.1-107.9 MHz
Reception Mode: FM
Distortion: < 2%
Power Supply: 2 X AAA 1.5V batteries
The applied bandwidth: 200 K.
Using Your Product
The receiver:
Insert two AAA batteries into the battery compartment which is situated on the ear cup
Ensure that the battery + and – polarity is correct. as the earphone will not be able to pick up
any of the signal the transmitter will produce and may result in damage to the equipment
The above diagram shows the way the product can also be connected directly to other
equipment using the 3.5 jack as well as picking up the signal from the transmitter.
B
A
Loading...