Teknik TCM 8800 L QPSK - A/V, TCM 8800 F QPSK - A/V User Manual

FRONT PANEL FUNCTIONAL

1- On-Off Switch : for use to turn on and turn off of the device
2- Sat Select Button : for use transition to the satellite receivers
3- Signal Light : showing signal status of the satellite receiver you chosen
4 Power Light : light indicator the operating status of device
5- Display : 2 x 4 Digit LED indicator
6- OK Button : to confirm the changes you made
7- / Left – Right Button :for use to volume leveling and use for to choose left right
8- / Up – Down Button : for use to channel changes and use for the choose up down
9- Menu Button : for use to make some changes in the satellite receivers menu
10- 3.6 “ TFT LCD Screen : you can monitor the process while you are doing

1- On-Off Switch : for use to turn on and turn off of the device
2- Sat Select Button : for use transition to the satellite receivers
3- Signal Light : showing signal status of the satellite receiver you chosen
4 Power Light : light indicator the operating status of device
5- Display : 2 x 4 Digit LED indicator
6- OK Button : to confirm the changes you made
7- / Left – Right Button :for use to volume leveling and use for to choose left right
8- / Up – Down Button : for use to channel changes and use for the choose up down
9- Menu Button : for use to make some changes in the satellite receivers menu
10- 0.08 mA 12 V Cooling Fan : for use to cooling of the device.

REAR PANEL FUNCTIONAL SPESIFICATIONS

Rear Panel Connection Points

1- IF Input : you can connect the cables from LNB or

satellite multiswitches.

2- RS 232 : you can upgrade your receiver with this input
3- Audio : you can make stereo audio output

4- Video : you can make high quality video output
5- Fan : fan is cooling and ventilating of device

6- Fuse : to prevent the electrical malfunction there is a

fuse in device

7- AC 220 : Power unit

CONNECTION TYPES

T TA 35 CATV PUSH-PULL

LINE AMPLIFIER