TEKMAGIC W18-W User Manual

Page 1
W18-W User Guide
I. Product Overviews
1. Date
2. Set/Confirm Button
3. Hourly chime Indicator
4. 12/24 Hour
6. week
7. Mode Button
8. Countdown Timer Indicator
9. Start/ Pause /Adjust Button
10. Second
11. Minute
12. Light Button
13. Alarm Indicator
Page 2
II. Time Setting
2.1
Seconds
On the default page, long press the "SET" button until the second starts blinking, then press the
"ADJ" button once make Second zero.
2.2
Hour
Press the "Mode" button once, then the blinking will go to Hour, press "ADJ" button to adjust Hour
2.3
Minute
Press the "Mode" button again, then the blinking will go to Minute, press "ADJ" button to adjust
Minute
Page 3
2.4
Month
Press the "Mode" button again, then the blinking will go to Month, press "ADJ" button to adjust
Month
2.5
Date
Press the "Mode" button again, then the blinking will go to date, press "ADJ" button to adjust date
Page 4
2.6
Week
Press the "Mode" button again, then the blinking will go to week, press "ADJ" button to adjust week
2.7
12/24 Hours
Press the "Mode" button again, then the blinking will go to 12 or 24 hours format, press "ADJ"
button to choose 12 hours format or 24 hours format
2.8
Confirm all the settings
Finally press "SET" button once to confirm all the time settings.
Page 5
III. Stop Watch
3.1
On the default page, press "Mode" button once, then the watch will go to SP mode(stop watch
mode
3.2
On stop watch mode, press "ADJ" button to start stop watch function
Page 6
3.3
Press "ADJ" button again to pause stop watch function
3.4
Press "SET" button once to make stop watch zero.
IV. Alarm Clock
4.1 Alarm Clock Time Setting
4.1.1 On the default page, press "Mode" button twice, then the watch will go to AL mode(alarm
clock mode
Page 7
4.1.2
Long press the "SET" button until the Hour starts blinking, then press the "ADJ" button to
adjust hour
4.1.3
Press the "Mode" button again, then the blinking will go to Minute, press "ADJ" button to
adjust minute
Page 8
4.1.4
Press the "Mode" button again, then the blinking will go to L1/L2, press "ADJ" button to
choose L1 or L2.
<Note>:( )is the alarm clock for the current time; ( )is the alarm clock for
the other time zone. Dual time setting please take reference to
VIII
4.1.5 Press "SET" button once to confirm alarm clock time.
4.2 Alarm Clock Turn On/ Turn OFF
On the alarm clock mode, press the "ADJ" button alternately to turn on or turn off the alarm clock
function. When the watch shows below, indicates the alarm clock has been turn on.
Page 9
<Note>: Please press any button to end the alarm.
V. Hourly Chime Function Turn ON/ Turn OFF
On the alarm clock mode, press the "ADJ" button alternately to turn on or turn off the hourly chime
function. When the watch shows below, indicates the hourly chime function has been turn on.
VI.
Countdown Timer
6.1 On the default page, press "Mode" button three times , then the watch will go to TR
mode(countdown timer mode
Page 10
6.2 Countdown Timer Time-setting
6.2.1
Long press the "SET" button until the Hour starts blinking, then press the "ADJ" button to
adjust hour
6.2.2
Press the "Mode" button again, then the blinking will go to Minute, press "ADJ" button to
adjust minute
Page 11
6.2.3
Press the "Mode" button again, then the blinking will go to Second, press "ADJ" button to
adjust Second
6.2.4
Press "SET" button once to confirm countdown Timer Time-setting.
6.3 Countdown Timer Function Turn ON
6.3.1
On the TR mode, press the "ADJ" button once to turn on countdown timer function.
Page 12
6.3.1
Countdown Pause
Press the "ADJ" button again to pause countdown.
VII. Back Light
7.1 On any mode, press the "LIGHT" button once to turn on back light.
VIII.
Dual Time Setting
8.1 On the default page, press "Mode" button four times , then the watch will go to T2 mode. On
this mode, you can set up another time zone.
Page 13
8.2 Long press the "SET" button until the Hour starts blinking, then press the "ADJ" button to adjust
hour
8.3
Press the "Mode" button once, then the blinking will go to Minute, press "ADJ" button to adjust
minute
Page 14
8.4
Press "SET" button once to confirm setting.
<Note>: Only Hour and Minute can be adjusted in this time zone.
Loading...