Tekkeon ET2000 User Manual

ET2000 User Guide
Cord-Free Headset for Mobile Phones
Bluetooth mobile headset
Inside Front
1
USER GUIDE
ezTalker miniTMby Tekkeon is a miniature cord-free headset that enables comfortable, handsfree communication with your BluetoothTMmobile phone. ezTalker mini works with your Bluetooth-ready mobile phone to provide clear, high-quality communication.
While using your ezTalker mini headset, you can store your mobile phone in your pocket, backpack, or briefcase—just about anywhere in close proximity that is convenient for you.
Unpacking ezTalker mini
Your ezTalker mini package includes the following:
ezTalker mini Headset
Power Adapter
ezEarhook
ezFit Earpiece (2)
User Guide and QuickStart
(not shown)
2
Getting to Know ezTalker mini
Getting Started
Before using ezTalker mini, you must:
• Charge ezTalker mini
• Pair ezTalker mini to your mobile phone
• Fit ezTalker mini to your ear
Directions for each of these activities are provided in the following three sections. Once these steps are completed, you will be ready to use ezTalker mini!
TALK Button
Used for turning headset on/off, pairing, and making/receiving calls
Amber and Blue LEDs
Provides visual indication of headset status: power on/off, pairing mode, muting mode, charging mode, and low battery
Charging Jack
Input for power adapter to charge the headset
Volume Control
Used to adjust the speaker volume, mute the microphone and initiate last number redial
Speaker
Microphone
3
USER GUIDE
Charging ezTalker mini
Before using ezTalker mini, you must charge the headset for approximately two hours. When fully charged, the battery provides up to five hours of talk time and up to 120 hours of standby time.
To Charge the Headset
1. Remove the rubber plug that covers the charging jack on the upper left side of the headset.
2. Plug the power adapter into the charging jack.
3. Plug the power adapter into a wall outlet. While the headset is
charging, the amber LED on the headset will remain on. When the headset is fully charged, the amber LED will turn off.
4. Unplug the power adapter from the wall outlet and the headset.
5. Place the rubber plug in the charging jack.
BATTERY INDICATION: When the battery is low (less than 10% of capacity), the amber LED will flash and you’ll hear a beep every 32 seconds.
Pairing ezTalker mini to Your Mobile Phone
Pairing is the process of linking the headset with your Bluetooth mobile phone. Before using ezTalker mini with your mobile phone you must pair the devices. After this process is complete,
you can use the headset only with its paired mobile phone. To use ezTalker mini with a different mobile phone, you must repeat the pairing process with the new mobile phone. In this case, the headset will no longer work with the original mobile phone.
BEFORE YOU PAIR THE HEADSET, ENSURE THAT THE BATTERY IS FULLY CHARGED, AND REVIEW THE INSTRUCTIONS IN YOUR MOBILE PHONE USER GUIDE FOR PAIRING YOUR MOBILE PHONE TO A BLUETOOTH HEADSET.
Figure 1.
Power adapter connected to
ezTalker mini.
+ 11 hidden pages