Teka Secadora TKS1 170 C Instruction Manual
TKS1 710 C
SECADORA
INSTRUCTION MANUAL
MANUAL DE INSTRUCCIONES
MANUAL DE INSTRUÇÕES
ES
PT
EN
Contents
Safety information..............................................................................
Installation.........................................................................................
Part description.................................................................................
Attention and advice..........................................................................
Description of controls.......................................................................
Operation instruction.........................................................................
Programme table...............................................................................
Cleaning and routine maintenance..................................................
Alarm function..................................................................................
Precautions......................................................................................
Technical specifications & ...........................................Product fiche
Specialty drying function...................................................................
7
9
10
12
15
16
17
18
13
11
1
6
Dry
Dry clean Do not dry clean
Dry clean normal cycle
with any solvent
Normal
Not tumble dry normal
Do not dry
Dry flat
Drip dry
Line dry / hang to dry
In the shade
Dry care symbols
Please pay attention to use the drying machine if the
materials of your clothes can not be dried by it
the symbols as follows:
or contain
Safety information
To prevent any damages to your and others' life or
Safety notes
!
property, you have to follow the safety notes.
1
A
F
Dry clean normal cycle
petroleum solvent only
1.
appliances, and only for drying textiles which
have been washed with water in the household.
Please pay attention to the safety of power use
during the operation!
2.The power source with reliable earthing must be
used. Its earth wire must be buried under the
ground and shall not be connected with the
public utilities such as city water pipe or gas pipe
etc. The earth wire and null wire shall be
distinguished and shall not be connected
together.
3.The power wire shall be met national standard
and must be able to withstand the current above
16A. To ensure your and your family’s safety,
please make improvement immediately if any
power use at your home does not comply with the
above-mentioned requirements.
This product belongs to Category I electrical
Safety information
8.Adequate ventilation has to be provided to avoid
the back flow of gases into the room from
appliance burning other fuels, including open fires.
9.Do not dry unwashed items in the tumble dryer.
2
4.The maximum mass of dry textile material is 7
kilograms to be used in the appliance.
5.The tumble dryer is not to be used if industrial
chemicals have been used for cleaning.
6.The lint trap has to be cleaned frequently.
7.Lint must not to be allowed to accumulate around
the tumble dryer.
10.Items that have been soiled with substance such
as cooking oil, acetone, alcohol, petrol, kerosene,
spot removers, turpentine, waxes and wax
removers should be washed in hot water with a
extra amount of detergent before being dried in
the tumble dryer.
11.Items such as foam rubber (latex form), shower
caps,waterproof textiles, rubber backed articles
and clothes or pillows fitted with foam rubber pads
should not be dried in the tumble dryer.
12.Fabric softeners, or similar products, should be
used as specified by the fabric softener instructions.
13.The final part of a tumble dryer cycle occurs without
heat (cool down cycle) to ensure that the items are
left at a temperature the ensures that the items will
not be damaged.
14.WARNING: never stop a tumble dryer before the end
of the drying cycle unless all items are quickly
removed and spread out so that the heat is dissipated.
15.The exhaust air must not be discharged into a flue
which is used for exhausting fumes from appliance
burning gas or other fuels.
Safety information
products be placed in a tumble dryer they should first
be washed in hot water with extra detergent-this will
reduce, but not eliminate, the hazard.
19.The appliance should not be overturned during
normal use or maintenance.
20.Remove all objects from pockets such as lighters
and matches.
21.This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision
or instruction concerning use of the appliance in a
safe way and understand the hazards involved.
Children shall not play with the appliance. Cleaning
and user maintenance shall not be made by children
without supervision.
22.If the power cable is damaged, it must be replaced
by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
3
16.The appliance must not be install behind a lockable
door, a sliding door or a door with a hinge on the
opposite side to that of the tumble dryer. In such a
way that a full opening of the tumble dryer door is
restricted.
17.Oil-affected items can ignite spontaneously,
especially when exposed to heat sources such as in
a tumble dryer. The items become warm, causing an
oxidation reaction in the oil. Oxidation creates heat.
If the heat cannot escape,the items can become hot
enough to catch fire. Piling, stacking or storing
oil-affected items can prevent heat from escaping
and so create a fire hazard.
18.If it is unavoidable that fabrics that contain vegetable
or cooking oil or have been contaminated by hair care
Correct Disposal of this product:
23.This appliance is for indoor use only.
24.The openings must not be obstructed by a carpet.
25.Children of less than 3 years should be kept away
unless continuously supervised.
26.Keep pets away from this appliance.
27.If the appliance appear high temperature
please draw the mail plug immediately. abnormally ,
Safety information
This marking indicates that this product should
not be disposed with other household wastes
throughout the EU. To prevent possible harm
to the environment or human health from
uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse
of material resources. To return your used
device, please use the return and collection
systems or contact the retailer where the
product was purchased. They can take this
product for environmental safe recycling.
4
5
Safety information
Please do not dry the clothes with some flammable
Explosion danger
Injury danger
Damage danger
1.Do not dry over the rated capacity.
2.Do not operate the dryer without the filter door and
.
filter
base
3.Do not dry the clothes before being spun.
4.Do not expose the dryer directly under the sun, and
indoor use only.
5.Do not install the dryer in the humid and drenching
environment.
6.At the cleaning and maintenance, please do remember
to pull out the power plug and do not directly wash the
dryer with water.
substances such as the coal oil, alcohol
the explosion.
or there will be
3.Do not lean on the opened door of the dryer.
4.Do not put any pyrotoxin on the dryer, such as the
candle, electric cooker.
1.Do not disassemble and install the dryer under no
instruction or supervision.
Electric shock hazard
1.Do not draw the power cord forcefully to pull out the
mains plug.
2.Please do not plug/draw the mains plug with wet hands.
3.Do not damage the power cord and the power plug.
2.Do not stack this dryer on washing machine without
stacking kits.(if want stacking
on washing machine ,
please purchase the Independent parts and it must be
installed by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.)
6
Installation position
1.Please install the dryer on solid and flat ground.
2.Please do not place the dryer on the slope, soft carpet or wooden floor.
3.Please do not install the dryer outdoors, to prevent the dryer from being frozen to
damage of machine parts.
Installation
Level adjusting
If the floor is obviously uneven, it needs to be adjusted.
It vibrates the machine, causing machine to move from its position.
Using tools to adjust the height of four machine legs to
adjust the levelness of this dryer.
Power supply connection
1.Make sure that the voltage of the power supply is the same as the electric
of the dryer.specification
2.Please do not connect it with the power connection board, the universal plug or
socket.
not be used as the handle for delivery.
Transport
Move cautiously. Do not grasp any salient parts of machine. The machine
door can
7
Part description
Part description
Container
Control Panel
Door
Lint filter
Power Cord
Accessories
The following parts are optional for specific models.
If your dryer has following parts, please
them following the instruction below .
wear gloves and install
Hose holder(optional)
Condensing drain
hose(optional)
Step 1: removing the drain hose from the
hose connector using glove.
Step 2: insert the external drainage hose.
Installation step:
Handle
Maintenance flap
Quick start
8
Part description
Max. 120cm
200cm
2 Close the machine door
7. Take out the laundry when finished
6. Press the 【Start/Pause】button
8. Clean the lint filter
3 Plug the power cord
10.Unplug the power cord
9.Press the 【On/Off】button
1. Open the door and
load the laundry
4.Press the 【On/Off】button
and empty container
5.Select the desired programme
Step 3: put the hose holder on the washing basin or any other sink.
9
Before the first cycle, the dust and grease may remain in this dryer during the
transportation, to avoid contaminating your clothes,period of manufacture and
a)Put some clean rags into the drum.
b)Plug the power.
c)Press “On/Off” button, select the “Quick”programme, and press “Start/Pause” .
d)After finishing this programme, please follow the “cleaning and routine
maintenance” to clean the lint filter and air condenser on page 14.
1．Before drying, thoroughly spin the laundry in washing machine. High spin
speed can reduce the drying time and save energy consumption.
2．For uniform drying result, sort the laundry according to fabric type and drying
programme.
3．Before drying, please close zips, hooks and eyelets, button up, tie fabric belts, etc.
4．Do not over dry the clothes, because over dried clothes can easily get creases
5．Do not dry the articles containing rubber or similar elastic materials such as
bicycle covers and feather products.raincoats,
6．The door can be opened only after the programme of the drying machine is
Do not open the door before the programme finished, as the skin completed.
may be scalded by steam or hot surface.
7．Clean the lint filter and empty container after each use to avoid extension of
Attention & Advice
9. The weight references as follows:
Blended Coats
(about 800g)
Jackets (about
800g in cotton)
Towel Quilts
(about 900g
in cotton)
Shirts (about
300g in cotton)
Work Clothes
(upper and lower)
(about 1120g in
cotton)
Underpants
(about 70g in
cotton)
Undershirts
(about 180g in
cotton)
Single Sheets
(about 600g in
cotton)
Jeans Trousers
(about 800g)
Pajamas
(about 200g)
Socks (about 30g in
blended material)
or shrinkage.
drying time and energy consumption.
Attention
8．Do not dry these clothes after dry-clean process.
please follow these steps:
Advice
button.
!
Description of controls
10
Cycle
Different Dryer cycle can be selected
according to the user's needs to make
the clothes have more effective drying
result.
Start/pause
【Start/Pause】button，has the
start and pause function. When this
button is pressed, this machine is
switched between start and pause.
This function will give more
Anti-Crease
This function is used
drying process . to
delay. You can get
1-24hour by pressing
Delay
This function will give
less heat to protect sensitive
textiles from high temperature.
Gentle
Please empty
when the“ ”,
after the dryer
Tank
this key continuously .
【On/Off】button,has the
care to protect sensitive
textiles from being creased.
2
Digital tube display
Only light ( DELAY / REMAIN ) relevant to the phase that is currently
being carried out will remain display during the drying process.
time, that is, the drying procedure will finished in【x:xx】time.
When the drying procedure begins, REMAIN will display the remaining
The display “- ”means programme in “Standby” status, you can
press any buttons or open the door to awaken programme.
Delay
The four LED lights indicate
Please clean the filter when
the“ ” , is flashing after the
Fliter
dryer stops.
the status of the drying
Status display
procedure.
Time
Refresh
On
Off
drying. 20-60minutes
by pressing
this key continuously .
on and off function.
When this button is
pressed,this machine
On/Off
is switched between on
and off.
the container
is flashing,
stops.
This function is used
to adjusted the time of
Time
FILTE R TANK
CHIL D
LOCK ED
Note: This symbol means the energy efficiency test programme “standard cotton programme”, which is most suitable to dry
normal cotton load at rated load capacity.
11
Operation instruction
2.Rotate the programme knob to select the desired programme.
3.Select the Delay , Anti-Crease or Gentle functions for additional option.【 】 【 】 【 】
4.Press the Start/Pause key.【 】
The Drying procedure stops
The buzzer will prompt from the dryer when finishing the cycle.
Press the On/Off button to turn down the power , and pull out the power
cable.
【 】
Programme selector
1.Press the 【On/ Off】button.
Programme table
12
small items. Also for subsequent drying.
For washing which is to be dried quickly, e.g. made of acrylic fibres or for individual
For timer programme , delicate textiles made of acrylic fibres or small items.
U
sing T
i
m
e f
u
n
c
t
i
o
n to adj
ust W
ra
m
time
.【 】
【 】
For machine-washable woollen textiles.Textiles are fluffer,but not dried.
Remove and hang up textiles when the programme ends.
Delicate
Warm/Cool
(20min/30min)
Quick
Refresh
For non-iron washing made of synthetic and blended fabrics, cotton.
For cottons and coloureds made of cotton or linen.
Standard
Synthetics
Extra
3.5kg
7.0kg
Cotton
(max)
Weight
Programme
To dry thin synthetic
fabrics which are not ironed, such as easy care shirts, table linen,
baby clothes, socks. Drying level: cupboard dry.
To dry thick or multi-layered synthetic fabrics. Drying level: extra dry.
To dry cotton pieces of clothing.
Drying level: .extra dry
To dry cotton pieces of clothing.
Drying level: .applicable to hang
To dry cotton pieces of clothing.
Drying level: .applicable to iron
Application/Properties
To dry cotton pieces of clothing.
Drying level: .cupboard dry
Note: The above programme is only recommended for use, the user can according to personal habits to choose the right programme.
Thick or multi-layered fabrics,e.g. bedlinen, jeans, jackets etc, are not easy to dry. You'd better choose Cotton Extra programme.
Iron
Extra
Standard
Light
Light
To dry thin synthetic fabrics which are also to be hanged or ironed,sush as knitwear,shirts.
Drying level: applicable to hang or iron.
3.0kg
3.0kg
3.0kg
1.0kg
For refreshing or gertly cleaning textiles with commercially available dry cleaning products.
Specialty drying function
Specialty drying function
13
1. Instruction of the moisture sensor
This function can automatically sense the moisture of clothes, and will
adjust the time of drying procedure according to how much clothes automatically
This function will automatically activate during the drying procedure except the
“Cool” “Refresh”and programme.“Warm”
2. Additional time adjusting function
This function can set the time of drying procedure by your self; the time can be
adjusted from 20 to 60 minutes by press“Time” button. This function
few small clothes, for example, one facecloth or two pairs of socks.
special
to control drying process, but only for “Warm” It's like using timer
3. Instruction to the delay drying procedure
This function is used to delay clothes drying within 24 hours. You can press this
key continuously; it can be selected within 1-24 hours. The delay time means
drying procedure will start in x:xx hours.
When the delay procedure starts, the display will only show the delay start time
Steps in details
(1).Load your laundry and make sure the machine door is closed.
(2).Press the 【On/Off】button,then to turn the programme selector knob and select
(3).You can select the 【Anti-Crease】 or 【Gentle】functions according to your
(4).To press the 【Delay】 key.
(5).Continue to press the 【Delay】to select the delay time.
(6).After the 【Start/Pause】 key is pushed, the Dryer is at the run condition.
The drying procedure will be automatically performed when the delay time is over.
(7).If you push the【Start/Pause】button again, the delay function will be paused.
(8).If you want to cancel the “Delay” function, please press the 【On/Off】button.
and flash DELAY icon. After 30s, the display will light DELAY icon and show “-”.
programme.
4. Instruction of the child safety feature
(1).This machine incorporates a special child safety lock, which can prevent
from carelessly pressing keys or making the faulty operation.children
need.
(2).When the dryer is at the operation state, press the【 】andAnti-Crease
【Gentle】buttons at the same time for over 3 seconds to start child lock
function. When child lock function is set, the display will light “Child Locked”
you put into the dryer.
designed for
a desired programme.
icon.
14
Special drying function
5. Instruction of the Anti-Crease function【 】
or 120 minutes (selected), when the anti-crease function is selected in all of the
and the drum willdrying programme, the LED of anti-crease shall illuminate,
give more care to intermittent rotate during the drying programme , in older to
6. Instruction of the Gentle function【 】
the display time shall be to add 20 minutes, the LED of gentle shall illuminate,
and the programme will give less heat to protect sensitive textiles from high
7. Instruction of the drum light
For your convenience, this function can help you to see clearly when you open the
machine door.
Under the start state of the child lock button, the【 】andAnti-Crease
【 】buttons shall be pressed at the same time for over 3 seconds to Gentle
and no key can effect to the dryer except button.【On/Off】
release the child lock function.
ensure the sensitive textiles can not get crease.
temperature which may harm to these textiles, such as acetate, elastane and
When the gentle function is selected except “Refresh”, “Cool” and “Warm”,
etc.
At the end of the drying cycle, the “Anti-Crease” phase time is 30 minutes (default)
-Leave the dryer to cool down.
-Residual water may escape,place an absorbent
cloth under the maintenance flap.
1.Clean with water only; do not use
hard/sharp-edged objects! Do not operate
the dryer without the air condenser!
Clean the lint filter
Cleaning and routine maintenance
will cause the extension of drying time and energy use; therefore, the scrap
thread filter shall be cleaned after each use.
1.The lint filter accumulated on the filter will block the air circulation, which
2.Do disconnect the power cord before cleaning!
3.Do not operate the dryer without the lint filter !
4.Clean the lint filter after each use to prevent lint accumulation inside the dryer.
NOTE!
Wash air condenser
15
2.During drying, water may collect between the window
and the seal, but this does not affect the function of your dryer!
!
1.Unlock the maintenance flap.
2.Completely open maintenace flap.
3.Screw both locking levers towardas each other.
4.Pool out the air condenser.
Do not damage the air condenser!
5.Clean the air condenser completely, drain thoroughly.
6.Clean the seals.
7.Re-insert the air condenser, handle at the button!
8.Unscrew both locking levers.
9.Cloth the maintenance flap until it locks into position.
Please clean the air condenser approx, once every 3
Leave the dryer to cool down
1.Open the machine door.
2.Take out the lint filter, pull
upward to take it out.
3.Clean the lint filter; wipe off
the scrap threads accumulated
on the lint filter, with your hand or
rinse with water and dry thoroughly.
4.Reinstall the lint filter.
.
months if frequently used.
Cleaning and routine maintenance & Alarm function
16
Alarm function
“ ”E30
“ ”E32
“ ”E33
“ ”E34
Check the water tank and pump.
Check the filter and the air folw
Check the heater and the thermostat
Check the Humidity sensor and PCB
Check the front temperature sensor
Check the rear temprature sensor
Alarm Problem Alarm Reason Buzzer Alarm Release
Water tank full or pump
error
Air flow block
Heater problem
Humidity sensor error
Temperature sensor error
The Error Code is
flashing on X:XX
at Flash Rate 1.
Meanwhile the
beep is sounded
every 15 minutes.
“ ”Is flashing
“ ”Is flashing
Empty the water container
1.Hold and pull out the water container
with two hands.
2.Tilt the water container, pour out the
condensed water.
3.Insert the water container.
WARNING:
1.Empty the water container after each use, the programme will be
paused and the “ ” icon will flash if the water container is full during
the drying process. After the container emptyed, the dryer can be restarted
by pushing 【Start/Pause】 button.
2.Do not drink the condensed water.
!
Loading...