Express anti-calc
EN
www.tefal.co.uk
x3
EN Depending on model
*
x3
STEAMBOOST
www.tefal.com www.tefal.co.uk
CLICK
1.
www.tefal.com www.tefal.co.uk
EN Depending on model
*
4
1.
www.tefal.com www.tefal.co.uk
5
2.
x3
STEAMBOOST
ON
www.tefal.com www.tefal.co.uk
ON
OK
2min
max
6
2.
MODE
www.tefal.com www.tefal.co.uk
30
sec
7
2.
www.tefal.com www.tefal.co.uk
MAX
2s
Max
*
EN Depending on model
*
8
2.
www.tefal.com www.tefal.co.uk
wool - laine
silk - soie
synth. - synth.
NO
OKOK
9
NO
NO
2.
AUTO
OFF
www.tefal.com www.tefal.co.uk
8
min
30
min
ON
OK
ON
10
2.
www.tefal.com www.tefal.co.uk
3.
OK
www.tefal.com www.tefal.co.uk
*
OFF
EN Depending on model
*
1H
11
3.
1
2
www.tefal.com www.tefal.co.uk
12
3.
ANTI
CALC
www.tefal.com www.tefal.co.uk
OFF
3s
13
3.
1
2
www.tefal.com www.tefal.co.uk
14
3.
www.tefal.com www.tefal.co.uk
OFF
2H
NO
NO
15
3.
www.tefal.com www.tefal.co.uk
OFF
1H
16
EN
Important recommendations
Safety instructions
• Please read these instructions carefully before first use.
This product has been designed for domestic indoor use
only. Any commercial use, inappropriate use or failure to
comply with the instructions, the manufacturer accepts
no responsibility and the guarantee will not apply.
• Never unplug the appliance by pulling the power cord.
Always unplug your appliance:
- before filling the water tank.
- before cleaning the appliance,
- after each use.
• The appliance must be used and placed on a flat, stable,
heat-resistant surface. When you place the iron on the
iron rest, make sure that the surface on which you place
it is stable.
• This appliance is not intended to be used by persons
(including children) with reduced or impaired physical,
sensory or mental capabilities or persons lacking
appropriate knowledge or experience, unless a person
responsible for their safety provides either supervision or
appropriate instructions concerning use of the appliance
prior to its use.
• Children should be supervised to ensure they do not play
with the appliance.
• This appliance may be used by children aged 8 or
over and persons lacking appropriate knowledge
or experience or persons with reduced or impaired
physical, sensory or mental capabilities provided that
17
they have been thoroughly instructed regarding the
use of the appliance, are supervised, and understand
the risks involved. Children shall not play with the
appliance. Cleaning and user maintenance shall not
be made by children without supervision. Keep the
iron and its cord out of reach of children less than 8
years of age when it is energized or cooling down.
• The surfaces of your appliance marked by this
symbol can reach very high temperatures when
functioning, which may cause burns. Do not touch
the hot surfaces of the appliance (accessible metal
parts and plastic parts adjacent to the metallic
parts) until the appliance has completely cooled.
• Never leave the appliance unattended when it is
connected to the mains. Before storing the appliance,
once it is unplugged, please wait until it has cooled down
(around 1 hour).
• Never fill your appliance directly from the tap.
• The cartridge cap must not be opened during use.
• The appliance must not be used if it has been dropped,
if it has any visible damage, if it leaks, or if it functions
abnormally in any way. Do not attempt to dismantle
your appliance: have it examined at an Approved Service
Centre to avoid any danger.
• Check the electrical power and water connection cords
for signs of wear or damage prior to use. If the electrical
power cord or the water connection cord is damaged,
it must be replaced by an Approved Service Centre to
avoid any danger.
• All accessories, consumable goods and spare parts must be purchased exclusively from an Authorised Service
Centre.
• For your safety, this device complies with applicable standards and regulations (Low Voltage Directives,
Electromagnetic Compatibility, Environment, etc.)
• Your appliance is an electrical appliance: it must be used under normal conditions of use.
• It is equipped with a thermal fuse to avoid overheating.
18
• Always plug your steam generator:
!
- Into an electrical system whose voltage is between 220 and 240 V.
- Into an earthed electrical outlet.
Any connection error may cause irreversible damage and invalidates the guarantee. If you use an extension cord,
ensure that it is in good condition, has a plug with an earth connection and is suited to the power rating of the
appliance.
Important notice for ≥ 2800W models only :
Under unfavorable conditions, phenomena such as transient voltage drops or lighting fluctuations may occur.
Therefore it is recommended to plug the iron into a power supply with a maximum impedance of 0,30 Ω. If
necessary, the user can contact the electricity supplier for further information about the system impedance at the
interface point.
• Fully unwind the electrical cord and plug it into an earthed electrical outlet.
• Do not leave the power or water connection cords close to or in contact with sources of heat or sharp edges.
• The sole plate of your iron and the iron rest on the base unit can reach extremely high temperatures, and can
cause burns: do not touch them. Never touch the electrical power cords with the sole plate of the iron.
• Always ensure that the base unit is positioned close enough to the ironing surface to avoid straining and
premature wear of the water connection cord.
• Always use a vented/mesh ironing board to prevent water spots on clothes and to avoid hot steam venting
sideways. Be careful of hot steam when ironing close to the edges of the board.
• Your appliance produces steam which may cause burns.
- Handle the iron carefully, especially when ironing vertically.
- Never iron a piece of clothing while it is worn by a person, but always when it is on a hanger.
- Never iron while in a sitting position with one’s legs under the ironing board.
- Never point the steam at people or animals.
• Never immerse your appliance in water or any other liquid. Never place it under a running tap.
• During first use, your appliance may give off smoke, an odour or a discharge of particles, but this
is normal, is not harmful and will disappear. If you use the appliance for the first time, if you have
replaced the anti calc cartridge or after filling the water tank, press the steam control button
continuously for few minutes pointing it away from your linen, in order to prime the pump and obtain
• When in use, your electric pump injects water into the iron solepate. It makes a noise but this is normal.
• Safety Instructions for the Anti-Scale Cartridge and the Collector (Depending on Model):
Preparation
What water may be used ?
This appliance has been designed to be used with untreated tap water.
Types of water not to use: In order to prolong your appliance life, you should not use water from clothes dryers,
scented or softened water containing additives, water from refrigerators, batteries, air conditioners, rain water,
boiled, filtered or bottled water. Do not use pure distilled nor pure demineralised water.
All the type of water listed above may contain organic waste, mineral or chemical elements that can cause spitting,
brown staining or premature wear of the appliance.
Do not fill the water tank from the cartridge compartment.
Empty the water tank after every use. Do not store the steam generator with water in the water tank.
steam.
- Not for drinking
- Keep out of the reach of children
- Dispose with household refuse
- Keep in cool dry place
- Prior to rinsing the collector (depending on the model),
always wait until the appliance is completely cool and
unplugged for over an hour to unscrew the collector. To
perform this operation, the product must be near a sink,
since some water may flow out when opening it.
- Never operate the appliance without the scale collector.
- Never fill the iron using the collector’s opening.
- Always iron on the same level as the appliance so as to not
strain the cord. Do not place the appliance on a lower level or
on the floor.
Cartridge*
Anti calc maintenance
Do not put any descaling substances (vinegar,industrial descaling products, etc.) in the water tank or in the anti
calc compartment, they could damage your appliance.
19
Using the appliance without changing the cartridge can damage the appliance and stop its steaming performance.
x3
STEAMBOOST
Press on the anti calc button only if you have changed the cartridge.
To unsure the efficiency of the cartridge, please remove it from its plastic bag just before use. The international
guarantee will not cover any damages which occurs as a result of using the appliance without changing the cartridge
Semi-automatic self-cleaning procedure*
Never start the self-cleaning procedure when the appliance is on its base.
Always place the iron on its cleaning stand, over a sink.
Ensure that the scale collector* is installed in the iron and properly locked, prior to starting self-cleaning.
Never touch the iron or its cleaning stand during self-cleaning. The cleaning accessory may still be hot; wait at least 15
minutes before handling it.
The cleaning stand is only intended for self-cleaning.
Never use this accessory as an iron holder during normal use.
*depending on the model
PLEASE RETAIN THIS INSTRUCTION
BOOKLET FOR FUTURE REFERENCE
Environment protection first !
i
Your appliance contains valuable materials which can be recovered or recycled.
Leave it at a civic waste disposal centre.
A problem with your appliance ?
PROBLEMS CAUSES SOLUTIONS
You have just filled the tank or
changed the anti-calc cartridge, or
you have just started using it.
Your iron is producing little or no
steam.
Water runs out of the holes of the
soleplate.
There is no anti calc cartridge in
the appliance or it is not properly
installed.
Steam cannot be produced at the
temperature you have selected.
The water tank is empty. Fill the tank.
You are using steam for the first
time or you have not used it for
some time.
The setting is not correct (1 dot / 2
dots) and the soleplate is not hot
enough to produce steam.
20
Press the steam control button
continuously for few minutes
pointing it away from your linen, in
order to prime the pump.
Make sure the anticalc cartridge
is installed and locked in its
compartment.
Set the thermostat control in the
coloured zone (••• or MAX).
Press on the steam control button
away from your ironing board until
the iron produces steam.
Set the iron at 3 dots (••• or MAX)
and wait for the iron thermostat
light to go out before activating the
steam button again.
PROBLEMS CAUSES SOLUTIONS
Water streaks appear on the linen.
Brown streaks come through the
holes in the soleplate and stain
the linen.
The soleplate is dirty or brown and
may stain the linen.
Steam or water escapes under the
appliance.
The “anti calc” indicator is flashing.
The anti calc indicator is still flashing
after replacing the cartridge.
If you have any problems or queries please call our Customer Relations team first for expert help and advice
Your ironing board is saturated with
water because it is not suitable for
use with an appliance.
You are using chemical descaling
agents or additives in the water
ironing.
Your linen is not rinsed sufficiently
or you have ironed a new garment
before washing it.
You are ironing at too high a
temperature.
You are using starch.
The appliance is faulty.
The anti calc cartridge is no longer
efficient.
You have not pressed the reset
button.
Check that your ironing board is
suitable. We recommend that you
use a vented/mesh type ironing
board.
Never add this type of product in
the water tank (see “for what water
may be used”). Contact an Approved
Service Centre.
Ensure linen is rinsed thoroughly
to remove any soap deposits or
chemicals on new garments which
may be sucked up by the iron.
See our recommendations regarding
temperature control setting.
Always spray starch on the reverse
side of the fabric to be ironed.
Stop using your appliance and
contact an Approved Service Centre.
Replace the anti calc cartridge with a
new one then press the reset button
for a minimum of 3 seconds.
Press the reset button until the light
stops flashing.
21
1800146887-03
Loading...