EN
MULTICOOK & STIR
www.tefal.com
1
10
cups
MAX.
a
b
a
b
a
b
1
2
1
2
Fig.1 Fig.2 Fig.3 Fig.4
Fig.5 Fig.6 Fig.7 Fig.8
Fig.13Fig.14Fig.15Fig.16
Fig.17 Fig.19Fig.20
Fig.9 Fig.10Fig.11 Fig.12
Fig.18
2
12
13
3
5 6
4
18
8
10
14
15
16&17
7
9
11
19
a
b
a
b
Fig.1 Fig.2 Fig.3 Fig.4
Fig.5 Fig.6 Fig.7 Fig.8
10
cups
MAX.
Fig.9 Fig.10Fig.11 Fig.12
1
2
Fig.13Fig.14Fig.15Fig.16
1
2
a
b
Fig.17 Fig.19Fig.20
Fig.18
Fig.21 Fig.22
e j
a fc hd gb
16
i
a
f
b
g
e
j
d
i
c
17
lk
o
m h
n
CONTROL PANEL
16
a fc hd gb
i
e j
EN
17
c
b
a
g
f
lk
m h
o
n
d
e
i
j
5
DESCRIPTION
1 Steam basket
2 Graduation for water and rice
3 Removable pot
4 Measuring cup
5 Rice spoon
6 Soup spoon
7 Lid
8 Removable inner lid
9 Micro pressure valve
10 Lid opening button
11 Handle
12 Bottom connector
13 Support ring
14 Stir paddle
15 Rinsing tool
16 Control panel
a “Keep warm/Cancel” key
b “Menu” key
c “ Auto Rinse” key
d “DIY” key
e “<” key
f “Start” key
g “Delayed start” key
h “Stir” key
i “Temperature/Timer” key
j “>” key
17 Function indicators
a Baking function
b Soup function
c Steam function
d Stew/Slow cook function
e Crust/Fry function
f Jam function
g Porridge function
h Yogurt/Cheese function
i Bread rising function
j Dessert function
k Rice Cereals function
l Pilaf Risotto function
m Pasta function
n Defrost function
o Reheat function
18 Power cord
19 Housing
6
SAFETY INSTRUCTION
IMPORTANT SAFEGUARDS
SAFETY INSTRUCTIONS
Read and follow the instructions for use. Keep
them safe.
• This appliance is not intended to be operated by
means of an external timer or a separate remotecontrol system.
• This appliance can be used by children aged
from 8 years and above if they have been
given supervision or instruction concerning
use of the appliance in a safe way and if they
understand the hazards involved. Cleaning and
user maintenance shall not be made by children.
Keep the appliance and its cord out of reach of
children aged less than 8 years.
• Appliances can be used by persons with reduced
physical, sensory or mental capabilities or lack
of experience and knowledge if they have been
given supervision or instruction concerning use
of the appliance in a safe way and understand
the hazards involved.
• Children shall not play with the appliance.
• This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or lack
of experience and knowledge, unless they have
been given supervision or instruction concerning
EN
7
use of the appliance by a person responsible for
their safety.
• Children should be supervised to ensure that
they do not play with the appliance.
• As this appliance is for household use only, it is
not intended for use in the following applications
and the guarantee will not apply for:
− Staff kitchen areas in shops, offices and other
working environments
− Farm houses
− By clients in hotels, motels and other residential
type environments
− Bed and breakfast type environments
• If your appliance is fitted with a removable
power cord: if the power cord is damaged, it must
be replaced by a special cord or unit available
from a authorised service centre.
• If your appliance is fitted with fixed power
cord: if the power supply cord is damage, it
must be replaced by the manufacturer, the
manufacturer’s after-sales service department
or similarly qualified person in order to avoid any
danger.
• The appliance must not be immersed in water or
any other liquid.
• Use a damp cloth or sponge with diswashing
liquid to clean the accessories and parts in
contact with foodstuff. Rince with a damp
cloth or sponge. Drying accessories and parts in
contact with food with a dry cloth.
8
• If the symbol is marked on the appliance, this
symbol means “ Caution: surfaces may become
hot during use ”.
• Caution: the surface of heating element is
subject to residual heat after use.
• Caution: risk of injury due to improper use of the
appliance.
• Caution: if your appliance has a removable
power cord, do not spill liquid on the connector.
• Always unplug the appliance:
− immediately after use
− when moving it
− prior to any cleaning or maintenance
− if it fails to function correctly
• Burns can occur by touching the hot surface of
the appliance, the hot water, steam or the food.
• During cooking, the appliance gives out heat
and steam. Keep face and hands away.
• Cooking appliances should be positioned in
a stable situation with the handles (if any)
positioned to avoid spillage of the hot liquids.
• Do not get face and hands close to the steam
outlet. Do not obstruct the steam outlet.
• For any problems or queries please contact our
Customer Relations Team or consult our web site.
• The appliance can be used up to an altitude of
4000 m.
• For your safety, this appliance complies with the safety regulations and
directives in effect at the time of manufacture (Low-voltage Directive,
Electromagnetic Compatibility, Food Contact Materials Regulations,
Environment…).
EN
9
• Check that the power supply voltage corresponds to that shown on the
appliance (alternating current).
• Given the diverse standards in effect, if the appliance is used in a
country other than that in which it is purchased, have it checked by an
approved service centre.
Connecting to the power supply
• Do not use the appliance if:
− the appliance or the cord is damaged
− the appliance has fallen or shows visible damage or does not work
properly
− In the event of the above, the appliance must be sent to an approved
Service Centre. Do not take the appliance apart yourself.
• Do not leave the cord hanging
• Always plug the appliance into an earthed socket.
• Do not use an extension lead. If you accept liability for doing so, only
use an extension lead which is in good condition, has an earthed plug
and is suited to the power of the appliance.
• Do not unplug the appliance by pulling on the cord.
• Allways disconnect the appliance from the supply if it is left unattended
and before assembling, disassembling or cleaning.
Using
• Use a flat, stable, heat-resistant work surface away from any water
splashes.
• Do not allow the base of the appliance to come into contact with water
• Never try to operate the appliance when the bowl is empty or without
the bowl.
• The cooking function/knob must be allowed to operate freely. Do not
prevent or obstruct the function from automatically changing to the
keep warm function.
• Do not remove the bowl while the appliance is working.
• Do not put the appliance directly onto a hot surface, or any other
source of heat or flame, as it will cause a failure or danger.
• The bowl and the heating plate should be in direct contact. Any object
or food inserted between these two parts would with the correct
operation.
• Do not place the appliance near a heat source or in a hot oven, as
serious damage could result.
• Do not put any food or water into the appliance until the bowl is in
place.
10
• Respect the levels indicated in the recipes.
• Should any part of your appliance catch fire, do not attempt to put it
out with water. To smother the flames use a damp tea towel.
• Any intervention should only be made by a service centre with original
spare parts.
Protect the environment
• Your appliance has been designed to run for many years. However,
when you decide to replace it, remember to think about how you can
contribute to protecting the environment.
• Before discarding your appliance you should remove the battery from
the timer and dispose of it at a local civic waste collection centre
(according to model).
Environment protection first!
Your appliance contains valuable materials which can be recovered or
recycled.
Leave it at a local civic waste collection point.
EN
11
BEFORE THE FIRST USE
Unpack the appliance
• Remove the appliance from the packaging and unpack all the
accessories and printed documents.
• Open the lid by pushing the opening button on the housing – fig.1.
Read the Instructions and carefully follow the operation method.
Clean the appliance
• Remove the bowl – fig.2, the inner lid – fig.3 and the pressure valve –
fig.4 and 5.
• Clean the bowl, the valve and the inner lid with a sponge and washing
up liquid.
• Wipe the outside of the appliance and the lid with a damp cloth.
• Dry off carefully.
• Put all the elements back in their original position. Install the inner lid
in the right positions on the top lid of machine. Then, put the inner
lid behind the 2 ribs and push it on the top until it’s fixed. Install the
detachable cord into the socket on the cooker base.
FOR THE APPLIANCE AND ALL FUNCTIONS
• Carefully wipe the outside of the bowl (especially the bottom). Make
sure that there are no foreign residues or liquid underneath the bowl
and on the heating element – fig.6.
• Place the bowl into the appliance, making sure that it is correctly
positioned – fig.7.
• Assembly the paddle with the bottom connector, the support ring, and
the stir paddle - fig.8 and place it into the bowl - fig.9.
• Make sure that the inner lid is correctly in position.
• Close the lid in place so you hear a “click”.
• Install the power cord into the socket of the multicooker base and then
plug into the power outlet. The appliance will ring a long sound «Beep»,
all the indicators on the control box will light up for an instant. Then the
screen display will show «----», and all the indicators will switch off. The
appliance enters into standby mode, you can select the menu functions
as you wish.
• Do not touch the heating element when the product is plugged in or
after cooking. Do not carry the product in use or just after cooking.
• This appliance is only intended for indoor use.
12
Never place your hand on the steam vent during cooking, as there is a
danger of burns – fig.12.
After start the cooking, if you wish to change the selected cooking
menu because of an error, press «KEEP WARM/CANCEL» key and rechoose the menu you want.
Only use the inner pot provided with the appliance.
Do not pour water or put ingredients in the appliance without the
bowl inside.
The maximum quantity of water + ingredient should not exceed the
highest mark inside the bowl - fig.7.
COOKING PROGRAM TABLE
Programs Food Type
Veg 35min
Fish 20min 160 °C
Baking
Poultry 40min 160 °C
Meat 50min 160 °C
Veg 40min
Fish 45min
Soup
Poultry 50min
Meat 60min
Veg 35min
Fish 25min
Steam
Poultry 45min
Meat 55min
Veg 60min
Stew/Slow Cook
Crust/Fry
Yogurt (P1) - 8h 1h-12h 15 Possible - No 40 °C Cheese (P2) - 45min 30min-4h 5 No - No 80 °C Bread rising - 1h 10min-6h 5 No - No 40 °C 40 / 30 °C
Rice/Cereals - Automatic Automatic - No 5 Automatic Pilaf/Risotto - Automatic Automatic - Possible 5 Automatic -
DIY1, DIY2, DIY3,
DIY1+DIY2
Keep warm - - - - No - No 75 °C -
Auto-rinse - 10min 1min-20min 1
Fish 25min
Poultry 1h30min
Meat 2h
Veg 12min
Fish 10min
Poultry 15min
Meat 20min
Jam - 1h 5min-2h 5
Porridge - 25min 5min-2h 5
Dessert - 45min 5min-2h 5 Possible
Pasta - 20min 3min-3h 1 Possible 5 100 °C -
Defrost - 1h30min 10min-4h 5 No - No 70 °C -
Reheat - 25min 5min-1h 5 Possible
- 30min 5min-9h 5 Possible 5 100°C 40/50….150/160°C
Cooking Time
Default
Range Every (min) Range
time
5min-4h 5 Possible
10min-4h 5 Possible
5min-3h 5 No
20min-9h 5
5min-1h30m 1
Delayed Start Temperature Lid Position
Stirring
paddle
Normally
on
Normally
on
Normally
on
Normally
on
Normally
on
Every
Default Range (°C) Closed Open
(min)
Cooking
time
~24h
Cooking
time
~24h
Cooking
time
~24h
Cooking
time
~24h
- No 160 °C
Cooking
time
~24h
Cooking
time
~24h
Cooking
time
~24h
- No 100 °C -
140 °C
5
5 100 °C -
5 100 °C -
5 100 °C 80/100/120°C
5 100 °C 90/100/110 °C
5 100 °C -
5 160 °C
5 100 °C 80/ 100°C
100/110/120/130/
100/110/120/130/
140/150/160 °C
140 /150/160 °C
140 /150/160 °C
• •
• •
• •
• •
• • •
•
• •
•
•
•
•
• •
• •
• •
•
• •
• •
• •
•
Keep
warm
EN
13
MENU KEY
• Under standby status, press the «Menu» key to cycle through the
following functions: Baking Soup Steam Stew/ Slow cook
Crust/Fry Jam Porridge Yogurt – cheese Bread rising
Dessert Rice/ Cereals Pilaf / Risotto Pasta Defrost
Reheat
• The screen displays the default cooking time of each function (except
Rice/Cereals, Pilaf/Risotto and Yogurt/Cheese). If available for the
chosen program, “Keep warm” and “Stir” indicators flashes. “Start”
button light flashes and the linked function lights up.
Note:
You can long press the “Menu” key to cancel the “beep” sound if
needed (until the long beep sound). If you want to start the beep
sound again, press the “Menu” key for a second time.
BAKING FUNCTION
• Press «Menu» key to select function «Baking». The screen displays the
default cooking time, the light of «Start» and “Stir” will flash red. Then
press «<» or «>» to select the food type : Vegetables, Fish, Poultry or
Meat.
• Press «Temperature / Timer» key to activate the time setting function
and then press «<» and «>» to change the cooking time. Press again
«Temperature / Timer» and change the temperature by pressing «<»
and «>».
• Press «Stir» key and the “Stir” light will come on. Press again and the
“Stir” function will be off. If no action is done before starting the
cooking, the stirring function will be off.
• Press «Start» key. The multicooker will start the “Baking” cooking
program and the “Start” light will come on. The screen will display the
remaining cooking time.
• At the end of cooking, the multicooker will “beep” three times and
begin the keep warm program, the “Keep Warm” indicator will come on
and the screen will display the time for which the keep warm function
has been active.
14
SOUP FUNCTION
• Press «Menu» key to select function «Soup». The screen displays the
default cooking time, the light of «Start» and “Stir” will flash red. Then
press «<» or «>» to select the food type : Vegetables, Fish, Poultry or
Meat.
• Press «Temperature / Timer» key to activate the time setting function
and then press «<» and «>» to change the cooking time.
• Press «Stir» key and the “Stir” light will come on. Press again and the
“Stir” function will be off. If no action is done before starting the
cooking, the stirring function will be off.
• Press «Start» key. The multicooker will start the “Soup” cooking program
and the “Start” light will come on. The screen will display the remaining
cooking time.
• At the end of cooking, the multicooker will “beep” three times and
begin the keep warm program, the “Keep Warm” indicator will come on
and the screen will display the time for which the keep warm function
has been active.
STEAM FUNCTION
• Press «Menu» key to select function «Steam». The screen displays the
default cooking time, the light of «Start» will flash red. Then press «<»
or «>» to select the food type : Vegetables, Fish, Poultry or Meat.
• Press «Temperature / Timer» key to activate the time setting function
and then press «<» and «>» to change the cooking time.
• Press «Start» key. The multicooker will start the “Steam” cooking
program and the “Start” light will come on. The screen will display the
remaining cooking time.
• At the end of cooking, the multicooker will “beep” three times and
begin the keep warm program, the “Keep Warm” indicator will come on
and the screen will display the time for which the keep warm function
has been active.
Recommendations for steam cooking
• The quantity of water must be appropriate and always be lower than
steam basket. Exceeding this level (2.5L max) may cause overfows
during use. For information the mark of 2 cups in the bowl correspond
to about 1L of water.
• The approximate cooking time for steam are 1h30 for 2L of water and
45 min for 1L of water.
• Place the steam basket onto the bowl.
• Add the ingredients in the basket.
EN
15
STEW/ SLOW COOK FUNCTION
• Press «Menu» key to select function «Stew/Slow cook». The screen
displays the default cooking time, the light of «Start» will flash red. Then
press «<» or «>» to select the food type : Vegetables, Fish, Poultry or Meat.
• Press «Temperature / Timer» key to activate the time setting function
and then press «<» and «>» to change the cooking time. Press again
«Temperature / Timer» to change the temperature by pressing «<» and
«>».
• The light of “Stir” lights up. Press the “Stir” key to off the “Stir” function.
Press again to activate. If no action is done before starting the cooking,
the stirring function will be on.
• Press «Start» key. The multicooker will start the “Stew/ Slow cook” cooking
program and the “Start” light will come on. The screen will display the
remaining cooking time.
• At the end of cooking, the multicooker will “beep” three times and begin
the keep warm program, the “Keep Warm” indicator will come on and
the screen will display the time for which the keep warm function has
been active.
CRUST FRY FUNCTION
• Press «Menu» key to select function «Crust Fry». The screen displays the
default cooking time, the light of «Start» will flash red. Then press «<»
or «>» to select the food type : Vegetables, Fish, Poultry or Meat.
• Press «Temperature / Timer» key to activate the time setting function
and then press «<» and «>» to change the cooking time. Press again
«Temperature / Timer» to change the temperature by pressing «<» and
«>».
• The light of “Stir” lights up. Press the “Stir” key to off the “Stir” function.
Press again to activate. If no action is done before starting the cooking,
the stirring function will be on.
• Press «Start» key. The multicooker will start the “Crust Fry” cooking
program and the “Start” light will come on. The screen will display the
remaining cooking time.
• At the end of cooking, the multicooker will “beep” three times and
begin the keep warm program, the “Keep Warm” indicator will come on
and the screen will display the time for which the keep warm function
has been active.
16
Note:
• Always use this function with oil and food. With oil only, it may
cause a failure or danger.
• Do not use the steam basket to cook with this function, it may cause
melting of the steam basket.
JAM FUNCTION
• Press «Menu» key to select function «Jam». The screen displays the default
cooking time, the light of «Start» will flash red.
• Press «Temperature / Timer» key to activate the time setting function and
then press «<» and «>» to change the cooking time. Press again «Temperature
/ Timer» to change the temperature by pressing «<» and «>».
• The light of “Stir” lights up. Press the “Stir” key to off the “Stir” function. Press
again to activate. If no action is done before starting the cooking, the stirring
function will be on.
• Press «Start» key. The multicooker will start the “Jam” cooking program and
the “Start” light will come on. The screen will display the remaining cooking
time.
• At the end of cooking, the multicooker will “beep” three times.
Note: No keep warm function for this function
PORRIDGE FUNCTION
• Press «Menu» key to select function «Porridge». The screen displays the
default cooking time, the light of «Start» will flash red.
• Press «Temperature / Timer» key to activate the time setting function
and then press «<» and «>» to change the cooking time.
• The light of “Stir” lights up. Press the “Stir” key to off the “Stir” function.
Press again to activate. If no action is done before starting the cooking,
the stirring function will be on.
• Press «Start» key. The multicooker will start the “Porridge” cooking
program and the “Start” light will come on. The screen will display the
remaining cooking time.
• At the end of cooking, the multicooker will “beep” three times and
begin the keep warm program, the “Keep Warm” indicator will come on
and the screen will display the time for which the keep warm function
has been active.
EN
17
YOGURT FUNCTION
• Press «Menu» key to select function «Yogurt/Cheese». The screen
displays “P1” for Yogurt program, then the default cooking time
«08:00», , the light of «Start» will flash red.
• Press «Temperature / Timer» key to activate the time setting function
and then press «<» and «>» to change the cooking time.
• Press «Stir» key and the light of “Stir” lights up. Press again and the
“Stir” function will be off. If no action is done before starting the
cooking, the stirring function will be off. For this function, if the paddle
is activated, it will only stir during the last 15 min of the cooking time
in order to do mixed yogurt.
• Press «Start» key. The multicooker will start the “Yogurt” cooking
program and the “Start” light will come on. The screen will display the
remaining cooking time.
• At the end of cooking, the multicooker will “beep” three times.
Note: No keep warm function for this function
CHOICE OF INGREDIENTS FOR YOGURT
Milk
What milk should you use?
All our recipes (unless otherwise stipulated) are prepared using cow’s
milk. You can use plant milk such as soya milk for example as well as
sheep or goat’s milk but, in this case, the firmness of the yogurt may vary
depending on the milk used. Raw milk or long-life milks and all the milks
described below are suitable for your appliance:
• Long-life sterilised milk: UHT whole milk results in firmer yogurt. Using
semi-skimmed milk will result in less firm yogurt. However, you can use
semi-skimmed milk and add one or two pots of powdered milk.
• Pasteurised milk: this milk gives a more creamy yogurt with a little bit
of skin on the top.
• Raw milk (farm milk): this must be boiled. It is also recommended to
let it boil for a long time. It would be dangerous to use this milk without
boiling it. You must then leave it to cool before using it in your appliance.
Culturing using yogurt prepared with raw milk is not recommended.
• Powdered milk: using powdered milk will result in very creamy yogurt.
Follow the instructions on the manufacturer’s box.
Choose a whole milk, preferably long-life UHT.
Raw (fresh) or pasteurised milk must be boiled then cooled and needs
the skin removing.
18
The ferment
For yogurt
This is made either from:
• One shop-bought natural yogurt with the longest expiry date possible;
your yogurt will therefore contain more active ferment for a firmer
yogurt.
• From a freeze-dried ferment. In this case, follow the activation time
specified on the ferment instructions. You can find these ferments in
supermarkets, pharmacies and in certain health product stores.
• From one of your recently prepared yogurt – this must be natural and
recently prepared. This is called culturing. After five culturing processes,
the used yogurt loses active ferments and therefore risks giving a less
firm consistency. You then need to start again using a shopbought
yogurt or freeze-dried ferment.
If you have boiled the milk, wait until it has reached room temperature
before adding the ferment.
Too high a heat may destroy the properties of your ferment.
Fermentation time
• Your yogurt will need between 6 and 12 hours of fermentation,
depending on the basic ingredients and the result you are after.
EN
Fluid
Sweet Acidic
6h 7h 8h 9h 10h 11h 12h
• Once the yogurt cooking process is finished, the yogurt should be
placed in a refrigerator for at least 4 hours and it can be kept max 7
days in refrigerator.
Firm
19
CHEESE FUNCTION
This function is to make soft cheese. It is preferably to use full-cream milk
and some chilled soft cheese.
• Press «Menu» key to select function «Yogurt/Cheese». The screen
displays “P1” for Yogurt program. Press «<» or «>» to switch to “P2” for
Cream cheese function. The screen displays the default cooking time
«02:00», the light of «Start» will flash red.
• Press «Temperature / Timer» key to activate the time setting function
and then press «<» and «>» to change the cooking time.
• Press «Start» key. The multicooker will start the “Cheese” cooking
program and the “Start” light will come on. The screen will display the
remaining cooking time.
• At the end of cooking, the multicooker will “beep” three times.
Note: No keep warm function for this function
BREAD RISING FUNCTION
This function is to rise bread dough at 30 °C or 40°C after manual
kneading and before baking.
• Press «Menu» key to select function «Bread rising». The screen displays
the default cooking time “01:00” , the light of «Start» will flash red.
• Press «Temperature / Timer» key to activate the time setting function
and then press «<» and «>» to change the cooking time. Press again
«Temperature / Timer» to change the temperature by pressing «<» and
«>».
• Press «Start» key. The multicooker will start the “Bread Rising” cooking
program and the “Start” light will come on. The screen will display the
remaining cooking time.
• At the end of cooking, the multicooker will “beep” three times.
Note: No keep warm function for this function
Recommendations Dough proofing (Bread rising):
• To prepare the dough separately and put it in the inner bowl, close the
lid and select «Bread rising» function.
• Once your dough is ready, you can use “Baking” function at 160°C
to bake for 20-23 minutes. Then turn it on other side for another 23
minutes approximate (depending on quantity of ingredients).
20
DESSERT FUNCTION
• Press «Menu» key to select function «Dessert». The screen displays the
default cooking time, the light of «Start» will flash red.
• Press «Temperature / Timer» key to activate the time setting function
and then press «<» and «>» to change the cooking time. Press again
«Temperature / Timer» to change the temperature by pressing «<» and
«>».
• Press “Stir” key and the “Stir” light will come on. Press again and the stir
function will be off. If no action is done before starting the cooking, the
stirring function will be off.
• Press «Start» key. The multicooker will start the “Dessert” cooking
program and the “Start” light will come on. The screen will display the
remaining cooking time.
• At the end of cooking, the multicooker will “beep” three times.
Note: No keep warm function for this function
RICE/CEREALS FUNCTION
• Pour the required quantity of rice into the bowl using the measuring
cup provided – fig.10. Then fill with cold water up to the corresponding
«CUP» mark printed in the bowl – fig.11.
• Close the lid.
Note: Always add the rice first otherwise you will have too much water.
Press «Menu» key to select function «Rice/Cereals». The screen displays
« », the light of «Start» will flash red, then press «Start» key. The
muticooker will start the “Rice/Cereals” cooking programand the “Start”
light will come on, the screen flickers « ». The cooking time and
temperature are determined automatically by the appliance, depending
on the number of ingredients.
• At the end of cooking, the multicooker will “beep” three times and
begin the keep warm program, the “Keep Warm” indicator will come on
and the screen will display the time for which the keep warm function
has been active.
EN
21
PILAF/RISOTTO FUNCTION
• Press «Menu» key to select function «Pilaf/Risotto». The screen displays
« », the light of «Start» will flash red.
• Press “Stir” key and the “Stir” light will come on. Press again and the stir
function will be off. If no action is done before starting the cooking, the
stirring function will be off.
• Press «Start» key. The muticooker will start the “Pilaf/Risotto” cooking
program and the “Start” light will come on, the screen flickers « ».
The cooking time and temperature are determined automatically by
the appliance, depending on the number of ingredients.
• At the end of cooking, the multicooker will “beep” three times and
begin the keep warm program, the “Keep Warm” indicator will come on
and the screen will display the time for which the keep warm function
has been active.
RECOMMENDATIONS FOR BEST RICE COOKING (Rice/ Cereals and
Pilaf/Risotto functions)
• Before cooking, measuring the rice with measuring cup and rinse it
except risotto rice.
• Put the rinsed rice well distributed around the whole surface of the bowl.
Fill it with water to the corresponding water level (The graduations in
cups).
• When the rice is ready, when the “Keep Warm” indicator light is on, stir
the rice and then leave it in the multicooker for a few minutes longer in
order to get perfect rice with separated grains.
This table below gives a guide to cook rice:
COOKING GUIDE FOR WHITE RICE – 10 cups
Measuring cups Weight of rice
2 300 g 2 cup mark 3per. – 4per.
4 600 g 4 cup mark 5per. – 6per.
6 900 g 6 cup mark 8per. – 10per.
8 1200 g 8 cup mark 13per. – 14per.
10 1500 g 10 cup mark 16per. – 18per.
The time and temperature are automatic for rice cooking.
22
Water level in
the bowl (+ rice)
Serves
Please note that there are 7 steps:
Preheat => Water absorb => Temperature quick rise => Keep boiling =>
Water evaporation => Braise rice => Keep warm.
The cooking time depends on the quantity and type of rice.
PASTA FUNCTION
To cook pasta it is important to wait until the water reaches good
temperature before adding pasta.
• Press «Menu» key to select function «Pasta». The screen displays the
default cooking time, the light of «Start» will flash red.
• Press «Temperature / Timer» key to activate the time setting function
and then press «<» and «>» to change the pasta cooking time.
• Press “Stir” key and the “Stir” light will come on. Press again and the stir
function will be off. If no action is done before starting the cooking, the
stirring function will be off.
• Press «Start» key. The muticooker will start the “Pasta” cooking program
and the “Start” light will come on. The screen displays the remaining
time.
• The Multicooker ring when the water is at good temperature. Put pasta
into the water and press again start to start timer. Until user do not
press start, cooking time do not start and multicooker keep water at
good temperature. During the pasta cooking, the lid must be open.
• At the end of cooking, the multicooker will “beep” three times.
Note: No keep warm function for this function
DEFROST FUNCTION
• Press «Menu» key to select function «Defrost». The screen displays the
default cooking time «01:30», the light of «Start» will flash red.
• Press «Temperature / Timer» key to activate the time setting function
and then press «<» and «>» to change the time.
• Press «Start» key. The muticooker will start the “Defrost” cooking
program and the “Start” light will come on. The screen displays the
remaining time.
• At the end of time, the multicooker will “beep” three times.
Recommendations :
The defrost cooking times are given as a rough guide and may vary
depending on the seasonality of the food, its size, the quantities used
and individual tastes, as well as the voltage of the main system.
EN
23
Frozen Vegetables : 50 min
Frozen Fish : 1h50min
Frozen Poultry : 85 min
Frozen Meat : 3h
Note: No keep warm function for this function
For a better defrosting, place your ingredients in the steam basket and
cut your ingredients into small pieces.
At the end of the defrosting, you have to cook your food immediately.
Refer to the desired cooking chapter.
REHEAT FUNCTION
This function is intended to reheat only cooked food.
• Press «Menu» key to select function «Reheat». The screen displays the
default cooking time, the light of «Start» will flash red.
• Press «Temperature / Timer» key to activate the time setting function and
then press «<» and «>» to change the cooking time. Press again «Temperature
/ Timer» to change the temperature by pressing «<» and «>».
• Press “Stir” key and the “Stir” light will come on. Press again and the stir
function will be off. If no action is done before starting the cooking, the
stirring function will be off.
• Press «Start» key. The multicooker will start the “Reheat” cooking program
and the “Start” light will come on. The screen displays the remaining time.
• At the end of cooking, the multicooker will “beep” three times and begin the
keep warm program, the “Keep Warm” indicator will come on and the screen
will display the time for which the keep warm function has been active.
CAUTION
• Never use the reheat function to defrost food.
• The cold food should not exceed 1/2 of the cooker’s volume. Too much
food cannot be thoroughly heated. Repeated use of “Reheat” or too little
food will lead to burnt food and hard layer at the bottom.
• It is recommended not to reheat thick porridge, or it may become pasty.
• Do not reheat long-stored cold food to avoid smell.
• To reheat rice, it is recommended to add some water and stir the rice
before starting.
• During reheating, it is recommended to stir the food from time to time.
24
DIY FUNCTION
Press «DIY» key to select DIY function under standby status, the
multicooker will first enter “DIY” setting status with the screen displaying
the default cooking time, and the light of “Start” will flash red.
You can save until 4 DIY programs
• 2 possibilities for DIY setting :
− if you want to have stable temperature and time for your program,
press “Temperature/Timer” key and “Stir” key to define your settings.
− If you want to use a menu as basis of your program, press menu key
to select your desiring cooking program. After select you menu, you
can modify it setting thanks to “Temperature / Time”.
• At the end of cooking, the multicooker will “beep” three times.
Note
• No keep warm function for this function
• In DIY function(only first setting) allow user to activate or stop stir
function at any time by press the stir button, with light of “stir” on and
off to show the stirring status .
• The multicooker memorizes the last temperature and cooking time DIY
setting for your next use.
• After select the DIY number to cancel, if users press “<” and “>” keys
together, the setting go to default settings(first setting) for the selected
DIY.
• If DIY1+ DIY2 is selected, LED tube is showing “d1 d2”, that means first
start with DIY1 and then start DIY2 directly.
KEEP WARM/CANCEL FUNCTION
There are 2 different functions of this key: Keep warm and Cancel.
1. Keep warm function:
1.1 Manual Keep warm:
You can press «Keep warm/Cancel» key manually, the light of “Keep
warm/Cancel” turns on, the multicooker enters into keep warm status.
1.2 Automatic keep warm:
The multicooker will enter “keep warm” status automatically at the end of
the cooking (certain menus are excluded). The buzzer will ring three “bip”,
the multicooker will enter automatically into keep warm status with the
“Keep Warm” indicator turning on and the screen will start to count the
time of keeping warm.
EN
25
Recommandation: In order to preserve the taste of your food, keep
warm function should not exceed 12 hours.
In case that you need to pre-cancel the automatic keep warm when the
cooking will be finished : long press «Keep warm» for 5 s before starting
the cooking program.
If you want to reput automatic keep warm, press again during 5s the
keep warm button.
2. Cancel function:
• Press “Keep warm/Cancel” key to cancel all setting data and back to
standby status.
DELAYED START FUNCTION
• To use the delayed start function, choose a cooking program and the
cooking time first. Then, press the key «Delayed start» and choose the
preset time. The default preset time will change depending on the
selected cooking time. The Range of preset is from the cooking time
up to 24 hours. Each press of «<» and «>» key can increase or decrease
the delayed start time.
• When you have chosen the required preset time, press the «Start» key
to enter cooking status, the «Start» indicator will remain on and screen
will display the number of hours you have chosen.
Note:
No delayed start function available for: Crust/fry, Bread rising, Yogurt,
Cheese, Auto-rinse and Keep warm functions.
TIMER FUNCTION
• To use the timer function, choose a cooking program and the cooking
time first. Then, press the key «Temperature/Timer» and set the
cooking time. Each press of «<» and «>» key can increase or decrease
the cooking time.
• When you have chosen the required cooking time, press the «Start» key
to enter cooking status, the «Start» indicator will remain on.
• You can see the cooking time after start the delayed start if you press
“Temperature / Timer” key.
• You can modify the cooking time during the cooking by pressing the
“Temperature / Timer” key. After selected the chosen cooking time and
without any action during 5 seconds, the multicooker will resume the
rest of cooking with the new setting.
26
TEMPERATURE FUNCTION
• To use the Temperature function, choose a cooking program and
the cooking time first. Then, press the key «Temperature/Timer» and
choose the temperature. The default cooking temperature will change
depending on the selected cooking program. Each press of «<» and «>»
key can increase or decrease the temperature.
• When you have chosen the required temperature, press the «Start» key
to enter cooking status, the «Start» indicator will remain on.
• You can modify the temperature during the cooking by pressing the
“Temperature / Timer” key. After selected the choosen temperature
and without action during 5 seconds, the multicooker will resume the
cooking with the new setting.
STIRRING FUNCTION
• To use the stirring function, choose a cooking program and the cooking
time first. Then, press the key «Stir» to activate or disactivate the
paddle.
• When you have chosen the stirring mode, press the «Start» key to enter
cooking status, the «Start» indicator will remain on.
• You can see the stirring function is on when the lights is up.
AUTO RINSE FUNCTION
• Use the automotic auto-rinse function to carry out a prewash of the
bowl.
• To use the autorinse function, assembly the rinsing tool with the
bottom connector, and the support ring - fig15.
• Put it in the bowl and add 600mL of water - fig.16.
• Press the “Auto-rinse” key.
• The default auto-rinse time is 10 minutes, press “Temperature/Timer”
key to activate the time setting function and then press «<» and «>» to
change the rinsing time.
EN
27
ON COMPLETION OF COOKING
• Open the lid – fig.1.
• Glove must be used when manipulating the cooking bowl and steam
tray – fig.13.
• Serve the food using the spoon provided with your appliance and
reclose the lid.
• 24 hours is the maximum keeping warm time.
• Press «Keep Warm/Cancel» key to finish keep warm status.
• Unplug the appliance.
CLEANING AND MAINTENANCE
• To ensure the multicooker is unplugged and completely cooled down
before cleaning and maintenance.
• It is strongly advised to clean the appliance after each use with a
sponge.
• The bowl, the inner lid, the cup and the rice & soup spoons, paddle and
rinsing tools are dishwasher safe.
Bowl, steam basket
• Scouring powders and metal sponges are not recommended.
• If food has stuck to the bottom, you may put water in the bowl to soak
for a while before washing.
• Dry the bowl carefully.
Taking care of the bowl
For the bowl, carefully follow the instructions below:
• To ensure the maintenance of bowl quality, it is recommended not to
cut food in it.
• Make sure you put the bowl back into the multicooker.
• Use the spoon provided or a wooden spoon and not a metal type so as
to avoid damaging the bowl surface – fig.14.
• To avoid any risk of corrosion, do not pour vinegar into the bowl.
• The color of the bowl surface may change after using for the first time
or after longer use. This change in color is due to the action of steam
and water and does not have any effect on the use of the multicooker,
nor it is dangerous for your health, it is perfectly safe to continue using
it.
28
Cleaning the micro pressure valve
• When clean the micro-pressure valve, please remove it from the lid –
fig.17 and open it by rotating in the direction «open» - fig.18a and 18b.
After cleaning it, please wipe dry it and meet the two parts together
and rotate it in the direction of «close», then put it back to the lid of the
multicooker – fig.20a and 20b.
Cleaning and care of the other parts of the appliance
• Clean the outside of the multicooker – fig.22, the inside of the lid and
the cord with a damp cloth and wipe dry. Do not use abrasive products.
• Do not use water to clean the interior of the appliance body as it could
damage the heat sensor.
EN
29
TECHNICAL TROUBLESHOOTING GUIDE
Malfunction
description
Any indicator
lamp off and no
heating.
Any indicator
lamp off and
heating.
Steam leakage
during using
Rice half cooked
or overtime
cooking.
Causes Solutions
Appliance not plugged.
Problem of the
connection of the
indicator lamp or
indicator lamp is
damaged.
Lid is badly closed.
Micro pressure valve
not well positioned or
uncomplete.
Lid or micro pressure
valve gasket is
damaged.
Too much or not
enough water
compared to rice
quantity.
Check the power cord is
plugged in the socket and
on the Mains.
Send to authorized
service center for repair.
Open and close again
the lid.
Stop the cooking (unplug
the product) and check
the valve is complete
(2parts locked together)
and well positioned.
Send to authorized
service center for repair.
Refer to table for water
quantity.
30
Malfunction
description
Rice half cooked
or overtime
cooking
Automatic
warm-keeping
fails (product
stay in cooking
position, or no
heating).
E0
E1
E3
Causes Solutions
Not sufficient
simmered.
The keep warm
function has been
cancelled by user
during the setting. See
keep warm function
paragraph.
The sensor on the top
open circuit or short
circuit.
The sensor on the
bottom open or short
circuit.
High temperature
detected.
authorized service center
authorized service center
EN
Send to the authorized
service center for repair.
Stop the appliance and
restart the program.
Ifthe problem repeats,
please send to the
for repair.
Stop the appliance and
restart the program.
Ifthe problem repeats,
please send to the
for repair.
Remark: If inner bowl is deformed, do not use it anymore and get a
replacement from the authorized service center for repair.
ENVIRONMENTAL PROTECTION
Help protect the environment!
Your appliance contains a number of materials that may be
recovered or recycled.
Leave it at a local civic waste collection point.
31
TEFAL/T-FAL* INTERNATIONAL LIMITED GUARANTEE
Accessories, consumables and end-user replaceable parts can be purchased, if locally available, as described on the
The Guarantee**:
TEFAL/T-FAL guarantees this product against any manufacturing defect in materials or workmanship during the guarantee
period within those countries*** as stated in the attached country list, starting from the initial date of purchase or
delivery date. The international manufacturer’s guarantee covers all costs related to restoring the proven defective
product so that it conforms to its original specifications, through the repair or replacement of any defective part and the
necessary labour. At TEFAL/T-FAL’s choice, an equivalent or superior replacement product may be provided instead of
repairing a defective product. TEFAL/T-FAL’s sole obligation and your exclusive resolution under this guarantee are limited
to such repair or replacement.
Conditions & Exclusions:
TEFAL/T-FAL shall not be obliged to repair or replace any product which is not accompanied by a valid proof of purchase.
The product can be taken directly in person or must be adequately packaged and returned, by recorded delivery (or
equivalent method of postage), to a TEFAL/T-FAL authorised service centre. Full address details for each country’s
authorised service centres are listed on TEFAL/T-FAL website (www.tefal.com) or by calling the appropriate consumer
service centre set out in the attached country list. In order to offer the best possible after-sales service and constantly
improve customer satisfaction, TEFAL/T-FAL may send a satisfaction survey to all customers who have had their product
repaired or exchanged in a TEFAL/T-FAL authorised service centre.
This guarantee applies only for products purchased and used for domestic purposes and will not cover any damage which
occurs as a result of misuse, negligence, failure to follow TEFAL/T-FAL instructions, or a modification or unauthorised
repair of the product, faulty packaging by the owner or mishandling by any carrier. It also does not cover normal wear
and tear, maintenance or replacement of consumable parts, or the following:
- damages or poor results specifically due to wrong voltage or frequency as stamped on the product ID or specification
- using the wrong type of water or consumable
- mechanical damages, overloading
- ingress of water, dust or insects into the product (excluding appliances with features specifically designed for insects)
- scaling (any de-scaling must be carried out according to the instructions for use)
- damage as a result of lightning or power surges
- damage to any glass or porcelain ware in the product
- accidents including fire, flood, etc
- professional or commercial use
Consumer Statutory Rights:
This international TEFAL/T-FAL guarantee does not affect the Statutory Rights a consumer may have or those rights that
cannot be excluded or limited, nor rights against the retailer from which the consumer purchased
the product. This guarantee gives a consumer specific legal rights, and the consumer may also have other legal rights
which vary from State to State or Country to Country. The consumer may assert any such rights at his sole discretion.
***Where a product purchased in a listed country and then used in another listed country, the international TEFAL/T-FAL
guarantee duration is the period for the country of usage, even if the product was purchased in a listed country with a lon
ger guarantee duration. The repair process may require a longer time if the product is not locally sold by TEFAL/T-FAL in th
e country of usage. If the product is not repairable in the new country of usage, the international TEFAL/T-FAL guarantee i
s limited to a replacement by a similar or alternative product at similar cost, where possible.
*TEFAL household appliances appear under the T-FAL brand in some territories like America and Japan. TEFAL/T-FAL are
registered trademarks of Groupe SEB.
Please keep this document for your reference should you wish to make a claim under the guarantee.
**For Australia only: Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You
are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or
damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
**For India Only: Your Tefal product is guaranteed for 2 years. The guarantee covers exclusively the repair of a defective
product, but at TEFAL’s choice, a replacement product may be provided instead of repairing a defective product. It is
mandatory that the consumer, to have his product repaired, has to log a service request on the dedicated Smartphone
application TEFAL SERVICE APP or by calling TEFAL Consumer Care Center at 1860-200-1232, Opening hours Mon-Sat 09
AM to 06 PM. Products returned by Post will not be covered by the guarantee. As a proof of purchase consumer needs to
provide both this stamped guarantee card and cash memo.
This product is repairable by TEFAL/T-FAL*, during and after the guarantee period.
: www.tefal.com
TEFAL/T-FAL internet site www.tefal.com
32
EN p. 5 – 32
EN
9100033204
Loading...