Teeter Hang Ups EP-960, EP-970 Assembly Instructions Manual
ComforTrakTM Series
Assembly Instructions
R
EP-960™ & EP-970™ Inversion Tables
Pour télécharger et imprimer les instructions de
montage du dossier ComforTrak™ en français,
rendezvous sur teeter-inversion.com
Para descargar e imprimir las instrucciones
de montaje de ComforTrak™ en español, visite
teeter-inversion.com
T
E
E
T
E
R
H
A
N
G
U
P
S
W
A
R
R
A
N
T
Y
YEAR
5
FULL
* Inversion Table images may
vary slightly from your model.
The EP-960 is shown here.
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING THE INVERSION TABLE.
SAVE THESE INSTRUCTIONS
WARNING - To reduce the risk of injury to persons:
• Read and understand all the instructions, view the instructional video, review all other accompanying documents, and inspect the
equipment before using the inversion table. It is your responsibility to familiarize yourself with the proper use of this equipment and the
inherent risks of inversion, such as falling on your head or neck, pinching, entrapment, or equipment failure. It is the responsibility of
the owner to ensure that all users of the product are fully informed about the proper use of the equipment and all safety precautions.
•
Close supervision is necessary when the inversion table is used near children, or by or near invalids or disabled persons.
• Use the inversion table only for its intended use as described in this manual. DO NOT use attachments not recommended by the
manufacturer.
• NEVER drop or insert any object into any opening.
• DO NOT use or store product outdoors.
• DO NOT use if you are over 6 ft 6 in (198 cm) or over 300 lbs. (136 kg). Structural failure could occur or head/neck may impact the
oor during inversion.
• DO NOT allow children to use this machine.
• Keep children, bystanders, and pets away from machine while in use.
• Keep body parts, hair, loose clothing and jewelry clear of all moving parts.
• The inversion table has no user serviceable parts.
• This product is intended for indoor home use only. DO NOT use in any commercial, rental or institutional setting.
FAILURE TO FOLLOW INSTRUCTIONS AND WARNINGS COULD RESULT IN SERIOUS INJURY OR DEATH.
BEFORE YOU BEGIN: Review all steps before beginning assembly and read all precautions before using the inversion table.
Carefully adhere to the Assembly Instructions and Owner’s Manual to help ensure safety and product integrity.
1
WARNING
!
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING THE INVERSION TABLE.
SAVE THESE INSTRUCTIONS
FAILURE TO FOLLOW INSTRUCTIONS AND WARNINGS COULD RESULT IN SERIOUS INJURY OR DEATH.
BEFORE YOU BEGIN: Review all steps before beginning assembly and read all precautions before using the inversion table.
Carefully adhere to the Assembly Instructions and Owner’s Manual to help ensure safety and product integrity.
• DO NOT use the equipment without a licensed physician’s approval and a review of the medical contraindications, as noted in the
Owner’s Manual.
• Failure to assemble and/or use the equipment as directed may void the manufacturer’s warranty on this product and could result in
injury or death.
• Choose a level surface for assembling and operating the table.
• Follow each step in sequence. DO NOT skip ahead.
• Make sure that all fasteners are secure.
• ALWAYS test and inspect the table. Make sure the table rotates smoothly to inverted position and back.
• ALWAYS replace defective components immediately and/or keep the equipment out of use until repair.
2
WARNING
!
ITEMS FOR ASSEMBL Y (Page 1 of 2)
3
E61100
F51008
E61301A
E61300B
HK1006
E61630
NX1620
ITEM NAME
ITEM NUMBER
Stretch-and-Grip
TM
Base Assembly
A-Frame
EZ-Angle Tether pre-assembled to A-Frame
ComforTrakTM Table Bed Assembly
Upper Portion with pre-assembled Bed Frame Extension
Lower Portion with pre-assembled Bed Frame
Table Bed Assembly Hardware Kit
Large Bolt (1), Small Bolts (2), Nuts (3)
Main Shaft
with
EZ-ReachTM Ankle Lock System Assembly
Main Shaft
with
Deluxe EZ-ReachTM Ankle Lock System Assembly
E61520
HK1007
TR1003
E61105
F51088
IA1149
ITEM NAME
ITEM NUMBER
Handle Assembly
Stretch MaxTM Handles (2)
Stretch MaxTM Handle Assembly Hardware Kit
Allen Head Bolts (6), Bolts (2), Nuts (2), Washers (6)
Roller Hinge Assembly
3-Hole Roller Hinges with Traction Handles (2)
Optional Accessories
Head Pillow
Tools Provided for Assembly
10/13mm Open-Ended Wrenches (2)
5mm Allen Wrench (1)
ITEMS FOR ASSEMBL Y (Page 2 of 2)
Items not shown to scale. Hardware drawings located on the insert inside each Hardware Kit.
4
Stretch-and-Grip Base Assembly
with pre-assembled Angle Tether
F51088
ComforTrak Table Bed Assembly
use Table Bed Assembly Hardware Kit (HK1006)
Main Shaft with EZ-Reach Ankle Lock System
for use with EP-960 models only
Main Shaft
with Deluxe EZ-Reach Ankle Lock System
for use with EP-970 models only
Stretch Max Handle Assembly
use Stretch Max Handle Assembly Hardware Kit (HK1007)
Roller Hinge Assembly
Optional Accessories
Tools Provided for Assembly
IA1149
E61100
F51008
E61301A
E61520
TR1003
E61105
E61300B
NX1620
E61630
Head Pillow
Bed Frame Extension
ComforTrak
™
Table Bed
Pivot Pins
Hinge Plates
Self-Locking Hooks
3-Hole Roller Hinges
Stretch Max
™
Handles
Height-Selector Locking Pin
1
2
3
4
5
6
7
8
9
Spreader Arms
EZ-Angle Tether
Crossbar
A-Frame
Main Shaft
Ankle Lock System
Ankle Comfort Dial
™
Stability Feet
UNDERSTANDING YOUR INVERSION TABLE
Identifying Parts and Components
* Inversion Table images may
vary slightly from your model.
The EP-960 is shown here.
Before reading further, study the drawing below to familiarize yourself with
the important components of your new Teeter Hang Ups® Inversion Table.
Located on
back of table
bed.
10
11
12
13
14
15
16
17
2
3
9
10
8
13
12
11
15
16
17
4
5
6
7
5
14
1
Loading...