How it Works
Teeter Hang Ups
Loading...
EP-850

Teeter Hang Ups EP-550, EP-850, EP-950 Assembly Instructions Manual

FlexTechTM Series Assembly Instructions
R
EP-550, EP-850 & EP-950 Inversion Tables
Para descargar e imprimir las instrucciones de montaje de ComforTrak™ en español, visite teeter-inversion.com
T
E
E
T
E
R
H
A
N
G
U
P
S
5
YEAR
W
A
R
R
A
N
T
Y
* Inversion Table images may
vary slightly from your model.
The EP-550 is shown here.
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING THE INVERSION TABLE.
SAVE THESE INSTRUCTIONS
WARNING - To reduce the risk of injury to persons:
• Read and understand all the instructions, view the instructional video, review all other accompanying documents, and inspect the equipment before using the inversion table. It is your responsibility to familiarize yourself with the proper use of this equipment and the inherent risks of inversion, such as falling on your head or neck, pinching, entrapment, or equipment failure. It is the responsibility of the owner to ensure that all users of the product are fully informed about the proper use of the equipment and all safety precautions.
•
Close supervision is necessary when the inversion table is used near children, or by or near invalids or disabled persons.
• Use the inversion table only for its intended use as described in this manual. DO NOT use attachments not recommended by the manufacturer.
• NEVER drop or insert any object into any opening.
• DO NOT use or store product outdoors.
• DO NOT use if you are over 6 ft 6 in (198 cm) or over 300 lbs. (136 kg). Structural failure could occur or head/neck may impact the
oor during inversion.
• DO NOT allow children to use this machine.
• Keep children, bystanders, and pets away from machine while in use.
• Keep body parts, hair, loose clothing and jewelry clear of all moving parts.
• The inversion table has no user serviceable parts.
• This product is intended for indoor home use only. DO NOT use in any commercial, rental or institutional setting.
FAILURE TO FOLLOW INSTRUCTIONS AND WARNINGS COULD RESULT IN SERIOUS INJURY OR DEATH.
BEFORE YOU BEGIN: Review all steps before beginning assembly and read all precautions before using the inversion table.
Carefully adhere to the Assembly Instructions and Owner’s Manual to help ensure safety and product integrity.
1
WARNING
!
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING THE INVERSION TABLE.
SAVE THESE INSTRUCTIONS
FAILURE TO FOLLOW INSTRUCTIONS AND WARNINGS COULD RESULT IN SERIOUS INJURY OR DEATH.
BEFORE YOU BEGIN: Review all steps before beginning assembly and read all precautions before using the inversion table.
Carefully adhere to the Assembly Instructions and Owner’s Manual to help ensure safety and product integrity.
• DO NOT use the equipment without a licensed physician’s approval and a review of the medical contraindications, as noted in the Owner’s Manual.
• Failure to assemble and/or use the equipment as directed may void the manufacturer’s warranty on this product and could result in injury or death.
• Choose a level surface for assembling and operating the table.
• Follow each step in sequence. DO NOT skip ahead.
• Make sure that all fasteners are secure.
• ALWAY S test and inspect the table. Make sure the table rotates smoothly to inverted position and back.
• ALWAY S replace defective components immediately and/or keep the equipment out of use until repair.
2
WARNING
!
Base Assembly(s)
A-Frame with Angle Tether (EP-550 & EP-850 Models) A-Frame with EZ-AngleTM Tether (EP-950 Models)
FlexTechTM Table Bed Assembly
FlexTech™ Table Bed with Frame Table Bed Assembly Hardware Kit
Bolts (2), Washers (2), Nuts (2)
Main Shaft with T-Pin Ankle Lock System
(EP-550 & EP-850 Models)
Main Shaft with EZ-ReachTM Ankle Lock System
(EP-950 Models)
Handle Assembly(s)
Tri-GripTM Handles (2) (EP-550 Models) Tri-GripTM Handle Assembly Hardware Kit
Bolts (6)
Over-EZTM Handles (2) (EP-850 Models) Over-EZTM Handle Assembly Hardware Kit Double-Threaded Bolts (6), Nuts (12)
ITEMS FOR ASSEMBLY
ITEM NUMBER
ITEMS FOR ASSEMBLY (Page 1 of 2)
The list below contains the components for the EP-550, EP-850 and EP-950 Models.
Components that are specic to a model are listed. Tools required for assembly are included.
3
Handle Assembly(s) Continued
Over-EZTM Handles (2) (EP-950 Models) Hinge Covers (2) (EP-950 Models) Over-EZTM Handle & Hinge Cover Assembly Hardware Kit Bolts (4), Double-Threaded Bolts (4),
Nuts (8), Allen Head Bolts (4)
Roller Hinge Assembly
3-Hole Roller Hinges (2) (EP-550 & EP-850 Models) 3-Hole Roller Hinges with Traction Handles (2)
(EP-950 Models)
Accessories
Head Pillow
Tools for Assembly
5mm Allen Wrench (1) 6mm Allen Wrench (1) 10/13mm Open-Ended Wrench (2)
ITEMS FOR ASSEMBLY
ITEM NUMBER
F71002
EP1100
EP1140
HK1010
EP1125
NX1630
F51069
HK1021
F51118
HK1023
GL9505 GL9524 HK1022
F51067
TR1003
EP1105
IA1149
EP1128A
F51088
ITEMS FOR ASSEMBLY (Page 2 of 2)
Items not shown to scale. Hardware drawings located on the insert inside each Hardware Kit.
4
Base Assembly
with pre-assembled Angle Tether
F51088
FlexTech™ Table Bed Assembly
use Table Bed Assembly Hardware Kit (HK1010)
Main Shaft with T-Pin Ankle Lock System
Roller Hinge Assembly
Optional Accessories
Tools Provided for Assembly
IA1149
EP1128A
F71002 A-Frame with Angle Tether (EP-550 & EP-850)
EP1100 A-Frame with EZ-Angle Tether (EP-950)
F51118 (EP-850)
F51067 3-Hole Roller Hinges (EP-550 & EP-850)
TR1003 3-Hole Roller Hinges with Traction Handles (EP-950)
EP1105
EP1140
EP1125 (EP-550 & EP-850)
NX1630 (EP-950)
Main Shaft with EZ-Reach Ankle Lock System
Tri-Grip Handle Assembly
use Tri-Grip Handle Assembly Hardware Kit (HK1021)
Over-EZ™ Handle Assembly
use Over-EZ™ Handle Assembly Hardware Kit (HK1023)
Large Over-EZ™ Handle Assembly
use Over-EZ™ Handle & Hinge Cover
Assembly Hardware Kit (HK1022)
F51069 (EP-550)
GL9505 (EP-950) GL9524
Head Pillow
Fle xTe ch
™
Table Bed
Pivot Pins
Hinge Plates
Self-Locking Hooks
3-Hole Roller Hinges
Handles
Height-Selector Locking Pin
De-Rattler Knob
1
2
3
4
5
6
7
8
9
Spreader Arms
Angle Tether
Crossbar
A-Frame
Main Shaft
Ankle Lock System
Ankle Comfort Dial
™
Stability Feet
UNDERSTANDING YOUR INVERSION TABLE
Identifying Parts and Components
* Inversion Table images may
vary slightly from your model.
The EP-550 is shown here.
Before reading further, study the drawing below to familiarize yourself with
the important components of your new Teeter Hang Ups® Inversion Table.
10
11
12
13
14
15
16
17
1
2
8
10
7
12
15
17
3
4
5
6
5
9
11
13
14
16
Loading...
+ 14 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use