Teeter Hang Ups ComforTrak Series, ComforTrak EP-560, ComforTrak EP-860, ComforTrak EP-960, ComforTrak EP-970 Assembly Instructions Manual

www.ActiveForever.com

ComforTrakTM Series Assembly Instructions

EP-560, EP-860, EP-960 & EP-970 Models

*Inversion Table images may

vary slightly from your model.

The EP-560 is shown here.

BEFORE YOU BEGIN: Review all steps before beginning assembly and read all precautions before using the inversion table. Carefully adhere to the Assembly Instructions and Owner’s Manual to help ensure safety and product integrity.

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USING THE INVERSION TABLE.

WARNING

WARNING - To reduce the risk of injury to persons:

• Read and understand all the instructions, view the instructional video, review all other accompanying documents, and inspect the

equipment before using the inversion table. It is your responsibility to familiarize yourself with the proper use of this equipment and the

inherent risks of inversion, such as falling on your head or neck, pinching, entrapment, or equipment failure. It is the responsibility of

the owner to ensure that all users of the product are fully informed about the proper use of the equipment and all safety precautions.

•

Close supervision is necessary when the inversion table is used near children, or by or near invalids or disabled persons.

• Use the inversion table only for its intended use as described in this manual. DO NOT use attachments not recommended by the

manufacturer.

• NEVER drop or insert any object into any opening.

• DO NOT use or store product outdoors.

• DO NOT use if you are over 6 ft 6 in (198 cm) or over 300 lbs. (136 kg). Structural failure could occur or head/neck may impact the

oor during inversion.

• DO NOT allow children to use this machine.

• Keep children, bystanders, and pets away from machine while in use.

• Keep body parts, hair, loose clothing and jewelry clear of all moving parts.

• The inversion table has no user serviceable parts.

• This product is intended for indoor home use only. DO NOT use in any commercial, rental or institutional setting.

FAILURE TO FOLLOW INSTRUCTIONS AND WARNINGS COULD RESULT IN SERIOUS INJURY OR DEATH.

SAVE THESE INSTRUCTIONS

BEFORE YOU BEGIN: Review all steps before beginning assembly and read all precautions before using the inversion table.

Carefully adhere to the Assembly Instructions and Owner’s Manual to help ensure safety and product integrity.

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USING THE INVERSION TABLE.

WARNING

• DO NOT use the equipment without a licensed physician’s approval and a review of the medical contraindications, as noted in the

Owner’s Manual.

• Failure to assemble and/or use the equipment as directed may void the manufacturer’s warranty on this product and could result in

injury or death.

• Choose a level surface for assembling and operating the table.

• Follow each step in sequence. DO NOT skip ahead.

• Make sure that all fasteners are secure.

• ALWAYS test and inspect the table. Make sure the table rotates smoothly to inverted position and back.

• ALWAYS replace defective components immediately and/or keep the equipment out of use until repair.

FAILURE TO FOLLOW INSTRUCTIONS AND WARNINGS COULD RESULT IN SERIOUS INJURY OR DEATH.

SAVE THESE INSTRUCTIONS

ITEMS FOR ASSEMBLY ITEM NUMBER

A-Frame

Angle T ether EZ-AngleTM T ether (EP-860, EP-960, EP-970)

(EP-560 models)

Stability Feet (2) May come pre-assembled Screws (2)

Table Bed

Upper Bed Portion Lower Bed Portion & Frame Head Pillow Bolts & Nuts (3) ComforTrak

Bed Frame Extension

Main Shaft with EZ-Reach

(for EP-960 model only)

Main Shaft with Deluxe EZ-Reach

System

(for EP-970 model only)

Ankle Lock System

Ankle Lock

E6-1100 F5-1007 F5-1008 F7-1033 E1-1002

E6-1300A E6-1300B E6-1105 F1-1390 E6-1380

E6-1630

NX-1630B

Items for Assembly

ITEMS FOR ASSEMBLY

This column is ONLY for the Assembly of the

Main Shaft with T-Pin Ankle Lock System (E6-1600)

Main Shaft

(for EP-560 models, EP-860 only)

with T-Pin Ankle Lock System

Rear Ankle Bar

Rear Heel Cup (one pre-assembled, one separate) Rubber Plug (1) Bolt/Nut (1) Screw (1)

Front Ankle Bar

Bolt (1) Nut (1) End Cap (1)

Ankle Comfort Dial Bar

Ankle Comfort Dials (2) (one pre-assembled, one separate) Screw (1)

ITEM NUMBER

E6-1600

IA-1113 EP-1054 F5-1056 F5-1087 H1-1200

EP-1045B F5-1089 H1-3007 F5-1048

IA-1119 IA-1118 IA-1123

ITEMS FOR ASSEMBLY

Handle Assembly

Strech Assist Strech Max Bolts & Nuts (2) (EP-860, EP-960, EP-970 ONLY) Allen Head Screws (4)

Handles (2) (EP-560 models only)

Handles (2) (EP-860, EP-960, EP-970)

May come pre-assembled

Roller Hinge Assembly

3-Hole Roller Hinges (2) Traction Handle 3-Hole Roller Hinges (2)

(EP-560 Sport, EP-960, EP-970)

(EP-560, EP-560 Ltd. EP-860)

Tools

10/13mm Wrenches (2)

Packaged with the Roller HInge Assembly

5mm Allen Wrench Screwdriver

ITEM NUMBER

E6-1500 E6-1520 H1-1209 F5-0071

F5-1064 TR-1003

F5-1088 IA-1149

F5-1130

E6-1100

F5-1007 F5-1008

E6-1300A

F7-1033

E1-1002

E6-1630 NX-1630B

E6-1300B

E6-1105

F1-1390

E6-1380

IA-1113

EP-1054

EP-1045B

F5-1056

E6-1600

F5-1087 H1-1200

F5-1089

H1-3007

IA-1118

IA-1123IA-1119

F5-1048

EP-1105

F5-1064

H1-1209

TR-1003

F5-1088

F5-0071E6-1500 E6-1520

F5-1130IA-1149

Items are not shown to scale.

BEFORE BEGINNING

Before reading further, study the drawing below to familiarize yourself with

the important components of your new Teeter Hang Ups

Head Pillow

Bed Frame Extension

ComforTrak™ Table Bed

3-Hole Roller Hinges

Handles

Height-Selector Locking Pin

Spreader Arms

Angle Tether

Crossbar

A-Frame

Main Shaft

Ankle Lock System

Ankle Comfort Dial™

Stability Feet

What Model Do You Own?

Important: Please locate the model of your Teeter inversion table before assembly.

The model can be found on A) the exterior of the box, or B) the serial label located on the back of the table bed.

My Serial Number:

__________________

inversion table.

Don’t forget to register your

warranty

*Inversion Table images may

vary slightly from your model.

The EP-560 is shown here.

WARNING LABEL PLACEMENT

Important: Please review all labels and supporting materials before using your inversion table.

This drawing indicates the locations of the warning labels found on your product.

If a label is missing, illegible or is removed, contact Customer Service at the phone number or website found at the bottom of this page to request a complimentary replacement label.

Note: Image and labels below not shown at actual size.

If you have any questions, please contact our Customer Service Department at 1.800.847.0143

We hope you enjoy your new Teeter Hang Ups Inversion Table!

+ 15 hidden pages

Teeter Hang Ups ComforTrak Series, ComforTrak EP-560, ComforTrak EP-860, ComforTrak EP-960, ComforTrak EP-970 Assembly Instructions Manual

Specifications and Main Features

Frequently Asked Questions

User Manual