TeeJet Technologies Centerline 230BP, Müller SPRAYDOS Installation Manual

Installation Manual for Müller SPRAYDOS controller

020-041-UK R5

This installation manual covers installation of CenterLine 230BP with Müller SPRAYDOS
controllers. We have endeavoured to deliver a fault free product. To ensure optimal use of the
equipment, we ask you to pay great attention when reading this manual. Regarding responsibility
for use of the product, we refer to our sales and delivery terms - especially paragraph 7, which fol­lows:

7. Product usage.

7.1 Any use of the product is at the sole risk of the buyer. The
buyer is therefore not entitled to any form for compensation
caused by, for example, any of the following:

• Disturbance to/from any electronic services or products that do
not confirm to the standards for CE marking,

• Missing or poor signal coverage or a succession hereof from exter­nal transmitters/receivers, used by the buyer,

• Functional faults, which apply to or from a PC-program or PC­equipment, not delivered by the seller.

• Faults that may arise from the buyers negligence to react to warn­ings and fault messages from the product, or which can be traced
to negligence and/or absent constant control of the work carried
out in comparison to the planned job.

7.2 When implementing any new equipment the buyer must take great
care and pay attention. Any doubts as to correct operation/use
should result in contacting TeeJet Technologies.

Enjoy work with CenterLine 230BP!

Kind regards,

Mølhavevej 2
9440 Aabybro
Denmark
Tel. [phone]
Fax [phone]
www.teejet.com

2

CenterLine 230BP; Müller SPRAYDOS Installation Manual
020-041-UK R5

INTRODUCTION TO CENTERLINE 230BP

The Centerline 230BP is a combined Guidance and Automatic Boom Section Control (ABSC)
device that features control of up to 15 boom sections. CenterLine 230BP connects in parallel to
the existing wiring loom to the section valves.

PRINCIPLE OF OPERATION

The Centerline 230BP system controls the sections valves according to the GPS position and the
GPS guidance makes it possible to avoid overlaps or skips.

The Centerline 230BP controls the section valves in automatic mode, and the controller section
switches should be set to off unless the operator wants to override the auto mode and thus force
spraying.

The Centerline 230BP monitors the controller section switches that controls the valves in manual
mode. The Master switch can be used both in automatic mode as well as in manual mode.

Required Parts

To add Automatically Boom Section Control to a Müller SPRAYDOS controller the following part
numbers are required:

Part No. Description

90-02483-xx* CenterLine 230BP

903-326

903-325

903-327

*Species the required manual language; e.g. 90-02483-UK

ABSC adapter box kit for Müller SPRAYDOS,
5 sections

ABSC adapter box kit for Müller SPRAYDOS,
7 sections

ABSC adapter box kit for Müller SPRAYDOS,
9 sections

CenterLine 230BP; Müller SPRAYDOS Installation Manual
020-041-UK R5

3

SYSTEM OVERVIEW:

B A

A B

B A

MATIC

AUT

OM SECTION

B

CONTROL

1008-0185

Note: CenterLine 230 is powered by the ABSC adapter box.

4

CenterLine 230BP; Müller SPRAYDOS Installation Manual
020-041-UK R5