Tedu TD 3000 User Manual

TD 3000 Instruction:

Q Operating Frequency: 315MHz
Q Using code: 2 codes (symbol A or B, standard for forward and reverse direction

of the electrical winch)

Q Battery Type: 12V alkaline battery

Q FCC notice:

Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.

FCC statement:

This device complies with Part 15 of the FCC Rules. Operations is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.

Q Operation Instruction:

Þ Put a 12V alkaline battery into the battery cover (battery polar +/-)
Þ Press A for the winch running forward, Press B for the winch running

reverse.

Þ The remote control distance will be about 5m.

Warning:

After the winch is running, it may generate disturbance. At that time the remote
control distance may be shorter.

The battery shall be changed to be a new battery every half a year.