9 30200Screw, 10-24 x 9/16"
12 33886Tube, Breather
14 28277Washer, Flat
15 30589Rod, Governor (Incl. 14)
16 31383ALever, Governor
17 31335Clamp, Governor lever
18 650548Screw, 8-32 x 5/16"
19 31361Spring, Extension
20 32600Seal, Oil
30 34570ACrankshaft
32 32323Washer, Thrust NOTE: This thrust washer maynot be
required if a new crankshafthas been installed. Check the
proper Mechanic's Handbook for acceptable end play. Use
this .010" thrust washer if excess end play is measured.
40 34851Piston, Pin & Ring Set (Std.) (2-5/8" Bore) NOTE: These
piston, pin andring sets and pistons have been superceded
into a new piston, pin and ring set assembly. As of this
update the ring sets (34854, 34855, 34856) are stillavailable.
It will be necessary to note on the engine that the piston, pin
190 35831Lever, Brake
191 35015BBracket Assy., S.E. Brake (Incl. 195)
192 34966Link, Control
193 34965Spring, Extension
194 32309Ring, Retaining
195 610973Terminal Assy.
196 35035Switch Assy.
206 610973Terminal (Use as required)
207 34336Link, Throttle
223 650451Screw, 1/4-20 x 1"
224 34690A* Gasket, Intake pipe
238 650806Screw, 10-32 x 5/8"
239 34338* Gasket, Air cleaner
240 34858Body, Air cleaner
246E 35435Filter, Pre-air (Use as required)
246 34340Element, Air cleaner
246D 34927Felt, Air Cleaner
250 34341ACover, Air cleaner
260 35127Housing, Blower
261 30200Screw, 10-24 x 9/16"
262 650831Screw, 1/4-20 x 15/32"
277 650774Screw, 1/4-20 x 2-3/8" (Use as requir ed)
277 792005Screw, 1/4-20 x 2-1/2" (Use as requir ed)
277 650795Screw, 1/4-20 x 2-1/4" (Use as requir ed)
290 34357Fuel Line (Epichlorohydrin 6-3/4")(17 cm)
290 29774Fuel Line(Braided 8-1/4")(21 cm)(Use as req.)
290 30705Fuel Line (Braided 16")(40 cm)(Use as req.)
290 30962Fuel Line (Braided 32")(81 cm)(Use as req.)
www.mymowerparts.com
For Discount Tecumseh Engine Parts Call 606-678-9623 or 606-561-4983
TVS105-53047EPage 4 of 9
Engine Parts List #1
Ref # Part NumberQty Description
292 26460Clamp, Fuel line
298 28763Screw, 10-32 x 35/64"
300B 34979AFuel Tank (Incl. 292 & 301A) NOTE: The following tanks
(34980A, 34979A, 34369A) were built with different size fuel
inlet openings. Tanks with 1-3/16" I.D. opening use fuel cap
33032. Tanks with 1-1/2" I.D. opening use fuel cap 35355.
301 33032Fuel Cap (Use as required)
305 34264Oil Fill Tube
306 34265Gasket, Oil fill tube
306 34282"O" Ring (This "O" ring is required with metal fill tube only
when replacement mounting flange with .777 dia. oil fill hole
has been used.)
For Discount Tecumseh Engine Parts Call 606-678-9623 or 606-561-4983
TVS105-53047EPage 5 of 9
Engine Parts List #2
www.mymowerparts.com
For Discount Tecumseh Engine Parts Call 606-678-9623 or 606-561-4983
TVS105-53047EPage 6 of 9
Engine Parts List #2
Ref # Part NumberQty Description
32 32323Washer, Thrust NOTE: This thrust washer maynot be
required if a new crankshafthas been installed. Check the
proper Mechanic's Handbook for acceptable end play. Use
this .010" thrust washer if excess end play is measured.
118 730194Rope Guide Kit (Use as required)
189A 650837Screw, 10-32 x 1/4"
196 35035Switch Assy.
238 650806Screw, 10-32 x 5/8"
239 34338* Gasket, Air cleaner
246E 35435Filter, Pre-air (Use as required)
246 34340Element, Air cleaner
246D 34927Felt, Air Cleaner
250 34341ACover, Air cleaner
287A 650735Screw, 10-24 x 3/8" (Use as required)
287APop Rivet (3/16" Dia.) (Purchase loca lly)
300B 34979AFuel Tank (Incl. 292 & 301A) NOTE: The following tanks
(34980A, 34979A, 34369A) were built with different size fuel
inlet openings. Tanks with 1-3/16" I.D. opening use fuel cap
33032. Tanks with 1-1/2" I.D. opening use fuel cap 35355.
For Discount Tecumseh Engine Parts Call 606-678-9623 or 606-561-4983
TVS105-53047EPage 7 of 9
Engine Parts List #3
www.mymowerparts.com
For Discount Tecumseh Engine Parts Call 606-678-9623 or 606-561-4983
TVS105-53047EPage 8 of 9
Engine Parts List #3
Ref # Part NumberQty Description
19 31361Spring, Extension
32 32323Washer, Thrust NOTE: This thrust washer maynot be
required if a new crankshafthas been installed. Check the
proper Mechanic's Handbook for acceptable end play. Use
this .010" thrust washer if excess end play is measured.
69 35261* Gasket, Mounting flange
118 730194Rope Guide Kit (Use as required)
182 6201Screw, 1/4-28 x 7/8"
185 31384APipe, Intake (Incl. 224)
186 32653Link, Governor spring
189A 650837Screw, 10-32 x 1/4"
196 35035Switch Assy.
206 610973Terminal (Use as required)
216 33086Lever, Speed adjusting
223 650451Screw, 1/4-20 x 1"
238 650806Screw, 10-32 x 5/8"
239 34338* Gasket, Air cleaner
240 34858Body, Air cleaner
246E 35435Filter, Pre-air (Use as required)
246D 34927Felt, Air Cleaner
246 34340Element, Air cleaner
250 34341ACover, Air cleaner
274 26754A* Gasket, Exhaust (Use as required)
275A 391019Muffler
277A 30063Screw, Torx T-30, 1/4-20 x 1/2" (Use as req.)
277 650774Screw, 1/4-20 x 2-3/8" (Use as requir ed)
277 792005Screw, 1/4-20 x 2-1/2" (Use as requir ed)
277 650795Screw, 1/4-20 x 2-1/4" (Use as requir ed)
300B 34979AFuel Tank (Incl. 292 & 301A) NOTE: The following tanks
(34980A, 34979A, 34369A) were built with different size fuel
inlet openings. Tanks with 1-3/16" I.D. opening use fuel cap
33032. Tanks with 1-1/2" I.D. opening use fuel cap 35355.
322 34977Connector Body
326 34113Plug, Screen
330 34970Wire Harness
330 34978Wire & terminal Assy.
361 650831Screw, 1/4-20 x 15/32"