For Discount Tecumseh Engine Parts Call 606-678-9623 or 606-561-4983
OH120-175014BPage 1 of 9
Engine Parts List #1
www.mymowerparts.com
For Discount Tecumseh Engine Parts Call 606-678-9623 or 606-561-4983
OH120-175014BPage 2 of 9
Engine Parts List #1
Ref # Part NumberQty Description
1 34291ACylinder (Incl. 2, 4 & 33) (3-1/8" Bo re)
2 31927Pipe Plug, 3/8-18 sq. head (Use as re quired)
2 28483Pipe Plug (3/8-18 hex countersunk) (A s req.)
2Pipe Plug (3/4-14 sq.hd.)(As req.)(Bu y local)
2 9556Pipe Plug (1/8-27 sq. hd.) (Use as re quired)
2 28534Pipe Plug(1/8-27 hex c/sunk headless) (As req)
4 27652Pin, Dowel
5 33977BCrankshaft (Incl. 6 thru 9) NOTE: When using this
crankshaft to repair older units equippedwith straight cut cam
and governor gears,it will be necessary to order 34751 helical
governor gear assembly and 34752 helical camshaft in order
to the complete the repair.
129 650488Screw, 1/4-20 x 1-1/4"
130 34457Bracket, Control
131 650168Washer, Flat
146 32577Cover, Cylinder NOTE: Determine the gap between the cover
and the machined surface on the cylinder, which can be
from .001" up to .007", in which case no shim gaskets will be
required. Use of gaskets must be limited to a combined total
of .010" thick. Steel spacersmust be used as required to eli
147 792028Screw, 5/16-18 x 7/8"
155 31971* Gasket, Shim (.004/.005 thick) NOTE: Determine the gap
between the cover and the machined surface on the
cylinder, which can be from .001" up to .007", in which case
no shim gaskets will be required. Use of gaskets must be
limited to a combined total of .010" thick. Steel
spacersmust be used a
156 31972* Gasket, Shim (.005/.007 thick) NOTE: Determine the gap
between the cover and the machined surface on the
cylinder, which can be from .001" up to .007", in which case
no shim gaskets will be required. Use of gaskets must be
limited to a combined total of .010" thick. Steel
spacersmust be used a
157 32031* Spacer, Steel (.010 thick) NOTE: Determine the gap
between the cover and the machined surface on the
cylinder, which can be from .001" up to .007", in which case
no shim gaskets will be required. Use of gaskets must be
limited to a combined total of .010" thick. Steel
spacersmust be used as re
153 792028Screw, 5/16-18 x 7/8"(Use w/32817 str .motor)
153 650781Screw,5/16-18 x 11/16"(Use w/33835 st r.motor)
162A 610903Connector, Flat
163A 610905Terminal
163 610904Terminal
209 730178Ech.Adapter Kit (Incl.210 & 211)(As r equired)
210 34102BGasket, Exhaust (Use as required)
211 30196Screw, 5/16-18 x 3/4" (Use as require d)
212 610990Connector, Male
213 610921Connector
214 610922Terminal
215 610989Terminal
216 610992Terminal, Female
217 610991Terminal, Female
218 30063Screw, 1/4-20 x 1/2"
238 730212Adapter Plate Kit (Optional) NOTE: If you are having
mounting problems in using a HH100 thru0H180 inplace of a
large frame competitivebrand, we would like to call your
attention to 730212 adapter plate kit. The kit converts the
bottom mounting system found on HH100 thru 0H180 to a
top mounting sys
249 33835Electric Starter Motor (12-Volt) (Refer to Division 5, Section
D for breakdown)
www.mymowerparts.com
For Discount Tecumseh Engine Parts Call 606-678-9623 or 606-561-4983
OH120-175014BPage 8 of 9
Engine Parts List #3
www.mymowerparts.com
For Discount Tecumseh Engine Parts Call 606-678-9623 or 606-561-4983
OH120-175014BPage 9 of 9
Engine Parts List #3
Ref # Part NumberQty Description
114 650399Screw, 10-32 x 5/8"
115 32008Element, Air cleaner
117 650513Nut, Wing
123 27070Washer, Lock
143 29774Fuel Line (Braided 8.25")(21 cm)(As r equired)
143 30705Fuel Line (Braided 16")(41 cm)(As req uired)
143 30962Fuel Line (Braided 32")(81 cm)(As req uired)