223 650378Screw, Torx T-30, 5/16-18 x 1-1/8"
224 27915A* Gasket, Intake pipe
260 34145Blower Housing (For electric starter)
261 650788Screw, 5/16-18 x 3/4"
262 29747BScrew, 5/16-24 x 21/32"
265 33272BCover, Cylinder head
275 33280AMuffler
www.mymowerparts.com
Page 4
For Discount Tecumseh Engine Parts Call 606-678-9623 or 606-561-4983
HM100-159011CPage 4 of 10
Engine Parts List #1
Ref # Part NumberQty Description
276 31588Plate, Muffler locking
276 35741Plate, Muffler locking
277 650729Screw, 5/16-18 x 3-3/16" (Use as requ ired)
277 651002Screw, 5/16-18 x 4-1/4" (Use as requi red)
281 33013Cover, Starter bubble
282 650760Screw, 8-32 x 7/16"
285A 33662Hub & Screen Assy.
287 29752Nut, 1/4-28
290 29774Fuel Line (Braided 8-1/4")(21cm)(As r equired)
290 30962Fuel Line (Braided 32")(80cm)(As requ ired)
291 30705Fuel Line (Braided 16")(40cm)(As requ ired)
292 26460Fuel Line Clamp (Use as required)
298 650665Screw, 1/4-15 x 7/8"
300 34156AFuel Tank (Incl. 292 & 301) NOTE: These tanks were
builtwith different size fuel inlet openings. Tanks with the
1-3/16" I.D. opening use fuel cap 34210. Tanks with the
1-1/2" I.D. opening use fuel cap 35355.
301A 410144BFuel Cap (White Plastic)(Standard) (Use as required) (1.5"
I.D.)
301A 33032Fuel Cap (Red Plastic) (Spurt Resistant, Low Profile) (Use as
required) (1.5" I.D.)
301A 34210Fuel Cap (Red Plastic) (Spurt Resistant, High Profile) (Use
as required) (1.5" I.D.)
301A 35355Fuel Cap (Red Plastic)(1.75" I.D.)
305 33893AOil Fill Tube
307 33590"O" Ring
310 34011ADipstick (Incl. 307)
336 650765Screw, 10-32 x 1/2"
337 34140Cover, Carburetor
338A 31291Plug, Cover
338 28942Screw, Sems 10-32 x 3/8"
340 34154Plate, Upper fuel tank mtg.
341 34155Bracket, Lower fuel tank mtg.
342 650561Screw, 1/4-20 x 5/8"
359 34141Guard, Starter
360 32576Seal, Snow Guard
365 650767Screw, 8-32 x 27/64"
For Discount Tecumseh Engine Parts Call 606-678-9623 or 606-561-4983
HM100-159011CPage 5 of 10
Engine Parts List #2
www.mymowerparts.com
Page 6
For Discount Tecumseh Engine Parts Call 606-678-9623 or 606-561-4983
HM100-159011CPage 6 of 10
Engine Parts List #2
Ref # Part NumberQty Description
37A 30322Nut & Lockwasher, 8-32
62 650760Screw, 8-32 x 3/8"
63 28545Grommet, Plastic
129 650727Screw, 5/16-18 x 1-3/4 (Use as requir ed)
131A 650713Screw, 5/16-18 x 5/8"
131 650737Screw, 1/4-20 x 1/2" (Use as required )
131 650738Screw, 1/4-20 x 5/8 (Use as required)
222APop Rivet (Can be purchased locally)
274 35865Gasket, Exhaust
275 33280AMuffler
277 650729Screw, 5/16-18 x 3-3/16" (Use as requ ired)
277 651002Screw, 5/16-18 x 4-1/4" (Use as requi red)
285A 33662Hub & Screen Assy.
290 29774Fuel Line (Braided 8-1/4")(21cm)(As r equired)
290 30962Fuel Line (Braided 32")(80cm)(As requ ired)
292 26460Fuel Line Clamp (Use as required)
298 650665Screw, 1/4-15 x 7/8"
300 34156AFuel Tank (Incl. 292 & 301) NOTE: These tanks were
builtwith different size fuel inlet openings. Tanks with the
1-3/16" I.D. opening use fuel cap 34210. Tanks with the
1-1/2" I.D. opening use fuel cap 35355.
301A 410144BFuel Cap (White Plastic)(Standard) (Use as required) (1.5"
I.D.)
301A 33032Fuel Cap (Red Plastic) (Spurt Resistant, Low Profile) (Use as
required) (1.5" I.D.)
301A 34210Fuel Cap (Red Plastic) (Spurt Resistant, High Profile) (Use
as required) (1.5" I.D.)
301A 35355Fuel Cap (Red Plastic)(1.75" I.D.)
337 34140Cover, Carburetor
338A 31291Plug, Cover
341 34155Bracket, Lower fuel tank mtg.
342 650561Screw, 1/4-20 x 5/8"
350 570629APrimer Assy.
351 32180CLine, Primer
290 29774Fuel Line (Braided 8-1/4")(21cm)(As r equired)
290 30962Fuel Line (Braided 32")(80cm)(As requ ired)
291 30705Fuel Line (Braided 16")(40cm)(As requ ired)
293 33715Impulse Fuel Pump NOTE: 34385 and 33715 (WIP)pumps
are replaced by 35813 and 35800 (WIP) pumps. The 33010
(3000 series) repair kit is still available. The 35791 repair kit
is used with the 35813 and 35800 fuel pumps.
294 35791Fuel Pump Repair Kit NOTE: 34385 and 33715 (WIP)pumps
are replaced by 35813 and 35800 (WIP) pumps. The 33010
(3000 series) repair kit is still available. The 35791 repair kit
is used with the 35813 and 35800 fuel pumps.
301A 410144BFuel Cap (White Plastic)(Standard) (Use as required) (1.5"
I.D.)
301A 33032Fuel Cap (Red Plastic) (Spurt Resistant, Low Profile) (Use as
required) (1.5" I.D.)
301A 34210Fuel Cap (Red Plastic) (Spurt Resistant, High Profile) (Use
as required) (1.5" I.D.)
301A 35355Fuel Cap (Red Plastic)(1.75" I.D.)
303 32958Fitting, Fuel
336 650765Screw, 10-32 x 1/2"
337 34140Cover, Carburetor
338A 31291Plug, Cover
364 33377Bracket, Carburetor cover mtg.
365 650767Screw, 8-32 x 27/64"
370 34346Decal, Instruction
370 35274Decal, Instruction
370 34170Decal, Instruction
370D 34144Decal, Primer
370E 34414Decal, Warning
275 33280AMuffler
276 31588Plate, Muffler locking
276 35741Plate, Muffler locking
277 650729Screw, 5/16-18 x 3-3/16" (Use as requ ired)
277 651002Screw, 5/16-18 x 4-1/4" (Use as requi red)
285A 33662Hub & Screen Assy.
301A 410144BFuel Cap (White Plastic)(Standard) (Use as required) (1.5"
I.D.)
301A 33032Fuel Cap (Red Plastic) (Spurt Resistant, Low Profile) (Use as
required) (1.5" I.D.)
301A 34210Fuel Cap (Red Plastic) (Spurt Resistant, High Profile) (Use
as required) (1.5" I.D.)
301A 35355Fuel Cap (Red Plastic)(1.75" I.D.)
313A 33876Gasket, Stator (Used only on Std. poi nt ign.)
337 34140Cover, Carburetor
338A 31291Plug, Cover
370D 34144Decal, Primer
375 610848Magneto (w/ring gear for 120 Volt sta rter) NOTE: The
complete magneto is not available as an assembly.
Themagneto number is shown for reference purpose only.
Order component parts individually, as shown in parts list.
(Refer to Division 5, Section B, page 28 for breakdown or
Fiche 18B, Grid F-1
377 30547ABreaker Points (Use with Std. point i gn.)
378 30548BCondenser
380 632038Carburetor (Incl. 184 & 379) (Refer to Division 5, Section A,