277A 650696Screw, 5/16-18x2-3/4" (Used with 276A )
281 33013Cover, Starter bubble
282 650760Screw, 8-32 x 3/8"
286B 33286Hub & Screen Assy.
www.mymowerparts.com
Page 4
For Discount Tecumseh Engine Parts Call 606-678-9623 or 606-561-4983
HHM80-190014CPage 4 of 11
Engine Parts List #1
Ref # Part NumberQty Description
287 29752Nut & Lockwasher, 1/4-28
290 29774Fuel Line (Braided 8-1/4")(21 cm)(As req.)
290 30705Fuel Line (Braided 16")(41 cm)(Use as req.)
290 30962Fuel Line (Braided 32")(81 cm)(Use as req.)
292 26460Clamp, Fuel line (Use as required)
298 650665Screw, 1/4-15 x 7/8"
300 34156AFuel Tank (Incl. 292 & 301) NOTE: These tanks were
builtwith different size fuel inlet openings. Tanks with the
1-3/16" I.D. opening use fuel cap 34210. Tanks with the
1-1/2" I.D. opening use fuel cap 35355.
301 410144BFuel Cap (White Plastic)(Std)(1-1/2" I.D.)
301 33032Fuel Cap (Red Plastic) (Spurt Resistant, Low Profile) (1-3/16"
I.D.)
301 34210Fuel Cap (Red Plastic) (Spurt Resistant, High Profile)
(1-3/16" I.D)
301 35355Fuel Cap (Red plastic) (1-1/2" I.D.)
305 35554Tube, Oil fill
306 35499"O" Ring
308 35540Clip, Fill tube
310 31297Dipstick (Incl. 306)
310 36205Dipstick
325 29443Clip, Fuel line (Use as required)
325 34246Clip, Ground wire (Use as required)
340 34154Plate, Fuel tank mounting
342 650561Screw, 1/4-20 x 5/8"
370A 35532Decal, Name
370J 34870Decal, Instruction Can be used on HM80 with diecast starter.
411 35568Debris Screen (Can be used on HM80 with stamped steel
recoil starter)
413 650907Screw, 5/16-18 x 1-5/8" (Can be used on HM80 with
stamped steel recoil starter)
420 730225SAE 30, 4-Cycle Engine Oil (Quart)
421 730226SAE 5W30, 4-Cycle Engine Oil (Quart)
425 730572Starter Muff Kit (Incl. 370J, 426 & 4 27) (Can be used on
HM80 with die cast starter)
429 650868Screw, 8-18 x 1-1/8" (3 Required) (Use as required) (Refer to
Mechanics Handbook for installation instructions).
430 611077Alternator, Add on (Use as required) (Refer to Mechanics
Handbook for installation instructions).
www.mymowerparts.com
Page 5
For Discount Tecumseh Engine Parts Call 606-678-9623 or 606-561-4983
HHM80-190014CPage 5 of 11
Engine Parts List #1
Ref # Part NumberQty Description
431 590609Centering tube (Use with engines equipped with die cast
aluminum starter)(Use as required) (Refer to Mechanics
Handbook for installation instructions)
431 590610Centering tube (Use as required) (Refer to Mechanics
Handbook for installation instructions).
432 611078A.C. Lighting Connector (Use as required) (Refer to
Mechanics Handbook for installation instructions).
432 611079D.C. Charging Connector (Use as required) (Refer to
Mechanics Handbook for installation instructions).
433 590611Alternator Shaft (4.00") (Use with engines equipped with cast
aluminum starter)(Use as required) (Refer to Mechanics
Handbook for installation instructions).
433 590636Alternator Shaft (Use with engines equipped with stamped
steel starter)(Use as required) (Refer to Mechanics
Handbook for installation instructions).
www.mymowerparts.com
Page 6
For Discount Tecumseh Engine Parts Call 606-678-9623 or 606-561-4983
HHM80-190014CPage 6 of 11
Engine Parts List #2
www.mymowerparts.com
Page 7
For Discount Tecumseh Engine Parts Call 606-678-9623 or 606-561-4983
HHM80-190014CPage 7 of 11
Engine Parts List #2
Ref # Part NumberQty Description
23 33627Bearing, Ball
32 33628Washer, Thrust
32 650625Washer, Thrust
74 31855Retainer, Bearing
97Lockwasher, Heavy split, #10 (Buy loc ally)
131 650802Screw, 1/4-20 x 5/8" (Use as required )
131 650737Screw, 1/4-20 x 1/2" (Use as required )
131 650738Screw, 1/4-20 x 5/8" (Use as required )
173A 32446Grommet, Breather tube
174 650128Screw, 10-24 x 1/2"
174 650597Screw, 10-24 x 5/8"
175 650778Lockwasher
176 650580Nut, Lock, 10-24
227A 35044Air Cl.Elbow (Incl.222A,228A,235A,239 A,242A)
228A 650824Stud, 1/4-20 x 7.33 (Use as required)
228A 650851Stud, 1/4-20 x 8.1 (Use as required) (Used with drilled thru
elbow)
229A 650825Nut & Lockwasher, 1/4-20
234A 650852Hex Nut, 1/4-20 (Used w/drilled thru elbow)
235A 30675Fitting, Breather
238A 650163Screw, 10-32 x 7/8"
239A 34698A* Gasket, Air cleaner bracket
241A 35045Air Cl.Bracket (Used w/drilled thru e lbow)
242A 34699Bracket, Air cleaner
245A 34700Element, Air cleaner
246A 34703Filter, Pre-air
250A 34702Cover, Air cleaner
251 650513Nut, Wing, 1/2-20
274 35865Gasket, Exhaust (Use as required)
277A 650696Screw, 5/16-18x2-3/4" (Used with 276A )
292 26460Clamp, Fuel line (Use as required)
298 650665Screw, 1/4-15 x 7/8"
370J 34870Decal, Instruction Can be used on HM80 with diecast starter.
370B 34387Decal, Instruction Can be used on HM80 with stamped steel
recoil starter.
370B 34704Decal, Air cleaner
395 33329DStarter Motor Kit (110-120 Volt) This 110-120 volt starter
motor kit may have been added to this engine. It can be
added only if cylinder hasdrilled and tapped starter mounting
bosses and a ring gear flywheel. Refer to service number
stamped on end cap of motor, or on decal for identification.
Ref
408 35570Screen Seal (Can be used on HM80 with stamped steel
recoil starter)
www.mymowerparts.com
Page 8
For Discount Tecumseh Engine Parts Call 606-678-9623 or 606-561-4983
HHM80-190014CPage 8 of 11
Engine Parts List #2
Ref # Part NumberQty Description
409 35569Spacer (Can be used on HM80 with stamped steel recoil