Page 1
For Discount Tecumseh Engine Parts Call 606-678-9623 or 606-561-4983
H30-35000R Page 1 of 8
Engine Parts List #1
www.mymowerparts.com
Page 2
For Discount Tecumseh Engine Parts Call 606-678-9623 or 606-561-4983
H30-35000R Page 2 of 8
Engine Parts List #1
Ref # Part Number Qty Description
1 34708A Cylinder (Incl. 2, 3 & 6) (2-1/2" Bor e)
2 26727 Pin, Dowel
3 27642 Pipe plug, 1/4-18
6 32600 Seal, Oil
7 29314B Intake Valve (Std.) (Incl. 11)
7 29315C Intake Valve (1/32" OS) (Incl. 11)
8 29313C Exhaust Valve (Std.) (Incl. 11)
8 29315C Exhaust Valve (1/32" OS) (Incl. 11)
9 31671 Valve Spring Cap (Used in early produ ction)
10 31672 Spring, Valve
11 31673 Valve Spring Cap
12 34709 Crankshaft
14A 32538B Piston & Pin Ass'y.(Std.)(2-1/2")(Inc l.16)
14A 32548B Piston & Pin Ass'y. (.010" OS) (Incl. 16)
14A 32549B Piston & Pin Ass'y. (.020" OS) (Incl. 16)
14 34514 Piston, Pin & Ring Set (Std.) (2-1/2" Bore)
14 34515 Piston, Pin & Ring Set (.010" OS)
14 34516 Piston, Pin & Ring Set (.020" OS)
15 28986 Ring Set (Std.) (2-1/2" Bore)
15 28987 Ring Set (.010" OS)
15 28988 Ring Set (.020" OS)
16 20381 Ring, Piston retaining
17 30963B Rod Assy., Connecting (Incl. 19)
18 28594 Dipper, Oil
19 32610A Bolt, Connecting rod
20 33149A Camshaft
21 27241 Lifter, Valve
22 35863 Cover, Cylinder (Incl. 23, 26, 28 & 3 4)
23 26208 Seal, Oil
24 27677A * Gasket, Cylinder cover
25 650488 Screw, 1/4-20 x 1-1/4"
28 29673 * Gasket, Oil fill plug
34 30574 Shaft, Mechanical governor
35 35479 Washer, Flat
36 30591 Gear Assy., Governor (Incl. 35)
37 29193 Ring, Retaining
38 30588A Spool, Governor
39 29953C * Gasket, Cylinder head
40 30579A Head, Cylinder (Incl. 41A)
41 650695A Screw, 5/16-18 x 2-1/4" (Use as requ ired)
41 6021A Screw, 5/16-18 x 1-1/2" (Use as requi red)
41 650865 Screw, 5/16-18 x 2" (Use as required)
41A 650694A Screw, 5/16-18 x 2" (Use as required)
42 33636 Resistor Spark Plug (J-8C)
43 32664 Baffle, Heat
44 31619A * Gasket, Breather (One required)
45 31337 Breather Assy. (Incl. 44 & 46)
46 31410 Element, Breather
50 650128 Screw, 10-24 x 1/2"
51 32649A * Gasket, Intake to cylinder
52 34597 Pipe, Intake
54 650451 Screw, 1/4-20 x 1"
55 6201 Screw, 1/4-28 x 7/8"
56 31688A * Gasket, Carburetor-to-intake
57 29752 Nut & Lockwasher Assy., 1/4-28
79 31341 Link, Throttle
80 31336 Lever, Governor
81 31335 Clamp, Governor lever
www.mymowerparts.com
Page 3
For Discount Tecumseh Engine Parts Call 606-678-9623 or 606-561-4983
H30-35000R Page 3 of 8
Engine Parts List #1
Ref # Part Number Qty Description
82 650548 Screw, 8-32 x 5/16"
87 33879A Control Bracket (Incl. 88, 89, 100 & 101) NOTE: In original
production the speed control assembly is riveted to the
blower housing baffle (Ref. #107). Replacement speed
control assembly includes screws (Ref. #101)and nuts (Ref.
#100) for mounting.
88 31342 Spring, Compression
89 650549 Screw, 5-40 x 7/16"
90 27793 Clip, Conduit
91 28942 Screw, 10-32 x 3/8"
92 34593 Spring, Extension
98 33857 Spring Assy., Extension (Incl. 98A)
100 30322 Locknut, 8-32 (Use as required)
101 650139 Screw, 8-32 x 1/2" (Use as required)
101 650152 Screw, 8-32 x 3/8" (Use as required)
101 30200 Screw, 10-24 x 9/16" (Use as required )
105 28277 Washer, Flat
106 31334 Rod, Governor
107 33342 Baffle, Blower housing
108 650561 Screw, 1/4-20 x 5/8"
108A 650701 Screw, 8-18 x 7/16"
109 33341 Baffle, Extension
111 34080 Spacer, Flywheel key
112 34443A Solid State Ass'y.
113 650872 Stud, Solid State mounting
114 650814 Screw, Torx T-15, 10-24 x 1"
115 610961 Flywheel key
116 610118 Cover, Spark plug (Use as required)
118 611080 Flywheel
119 33663C Housing, Blower NOTE: In original production, the starter
may be riveted to theblower housing. If the starter or blower
housing needs replacement, the other may need holes used
for pop rivetingenlarged to use standard mounting hardware.
Order 4 nuts (#29752) required to mount starter to replaceme
122 29212 Screw, 1/4-28 x 7/16"
123 650168 Washer
131 34694 Cup, Starter
132 650815 Washer, Belleville
133 650816 Nut, Flywheel
141 32660A Fuel Tank (Incl. 142 & 156)
142 33032 Cap, Fuel filler (Use as required)
142 410144B Cap, Fuel filler (Std.) (Use as requi red)
143 32661 Fuel Tank Bracket
146 650665 Screw, 1/4-15 x 7/8"
147 28212 Spacer, Tank bracket (Not used in all models)
150 650708 Washer, Flat
155 29774 Fuel Line (Braided, 8-1/4") (Use as r equired)
155 30705 Fuel Line (Braided, 16") (Use as requ ired)
156 26460 Clamp, Fuel line (Use as required)
157 610973 Terminal Ass'y. (Use as required)
190F 34150 Decal, Choke
190C 34346 Decal, Instruction
190 550223 Decal, Name
193 630978 Diaphragm Assy.
194 630932A Inlet needle, Valve, Seat & Gasket As s'y.
www.mymowerparts.com
Page 4
For Discount Tecumseh Engine Parts Call 606-678-9623 or 606-561-4983
H30-35000R Page 4 of 8
Engine Parts List #1
Ref # Part Number Qty Description
195 632208 Carburetor (Incl. 56, 193 & 194) (Refer to Division 5, Section
A, page 178 for breakdown)
197 590420 Starter, Rewind In original production, the starter may be
riveted to the blowerhousing. If the starter or blower housing
needs replacement, the other may need holes used for pop
riveting enlargedto use standard mounting hardware. Order 4
nuts (29752) required to mount starter to replacement blower
200 33233A * Gasket Set (Incl. items marked *)
www.mymowerparts.com
Page 5
For Discount Tecumseh Engine Parts Call 606-678-9623 or 606-561-4983
H30-35000R Page 5 of 8
Engine Parts List #2
www.mymowerparts.com
Page 6
For Discount Tecumseh Engine Parts Call 606-678-9623 or 606-561-4983
H30-35000R Page 6 of 8
Engine Parts List #2
Ref # Part Number Qty Description
1 34708A Cylinder (Incl. 2, 3 & 6) (2-1/2" Bor e)
26 27625 Plug, Oil fill (Incl. 28)
28 29673 * Gasket, Oil fill plug
54 650451 Screw, 1/4-20 x 1"
56 31688A * Gasket, Carburetor-to-intake
56A 27272A * Gasket, Carburetor to air cleaner
58A 730127 Air Cleaner Ass'y. (Incl.56A, 58, 59, 60, 66, 67 & 170) (Use
as required)
58A 730164 Air Cleaner Ass'y. (Incl. 56A, 58, 59, 60, 66, 67 & 170A)
(Use as required)
58B 31545 Air Cleaner Ass'y. (Incl. 56A, 59A, 60A, 61 & 62) (Use as
required)
59A 29961 Element, Air cleaner
60A 450208 Body, Air filter
61 29962 Screen, Spacer
62 30585 Cover, Air cleaner
66 28820 Screw, 10-32 x 1/2"
69A 730162 Kit, Exhaust adapter (Incl. 69 & 77B) (Use as required) (Not
for use on PTO side exhaust)
69 30081A * Gasket, Muffler
70A 30996 Muffler
77B 650493 Screw, 1/4-20 x 1-3/4"
80 31336 Lever, Governor
81 31335 Clamp, Governor lever
82 650548 Screw, 8-32 x 5/16"
88 31342 Spring, Compression
89 650549 Screw, 5-40 x 7/16"
90 27793 Clip, Conduit
91 28942 Screw, 10-32 x 3/8"
92 34593 Spring, Extension
114 650814 Screw, Torx T-15, 10-24 x 1"
150 650708 Washer, Flat
157 610973 Terminal Ass'y. (Use as required)
161 34594 Rod, Choke
190C 34346 Decal, Instruction
www.mymowerparts.com
Page 7
For Discount Tecumseh Engine Parts Call 606-678-9623 or 606-561-4983
H30-35000R Page 7 of 8
Engine Parts List #3
www.mymowerparts.com
Page 8
For Discount Tecumseh Engine Parts Call 606-678-9623 or 606-561-4983
H30-35000R Page 8 of 8
Engine Parts List #3
Ref # Part Number Qty Description
1 34708A Cylinder (Incl. 2, 3 & 6) (2-1/2" Bor e)
41 650695A Screw, 5/16-18 x 2-1/4" (Use as requ ired)
41 6021A Screw, 5/16-18 x 1-1/2" (Use as requi red)
41 650865 Screw, 5/16-18 x 2" (Use as required)
111 34080 Spacer, Flywheel key
112 34443A Solid State Ass'y.
113 650872 Stud, Solid State mounting
114 650814 Screw, Torx T-15, 10-24 x 1"
116 610118 Cover, Spark plug (Use as required)
118 611080 Flywheel
119 33663C Housing, Blower NOTE: In original production, the starter
may be riveted to theblower housing. If the starter or blower
housing needs replacement, the other may need holes used
for pop rivetingenlarged to use standard mounting hardware.
Order 4 nuts (#29752) required to mount starter to replaceme
122 29212 Screw, 1/4-28 x 7/16"
123 650168 Washer
124 650890 Lockwasher, 5/16
125 30747 Clip, Spark plug shorting
130 35185 Screen, Starter
136 Rivet, Pop (Can be purchased locally)
150 650708 Washer, Flat
163A 32203 Air Cleaner, Starter (Optional)
163C 34870 Decal, Instruction (Optional)
163B 32204 Bracket, Starter air cleaner (Optiona l)
163 730571 Str.Muff Kit(Incl.163A,163B,163C)(Opt .)
190 550223 Decal, Name
197 590420 Starter, Rewind In original production, the starter may be
riveted to the blowerhousing. If the starter or blower housing
needs replacement, the other may need holes used for pop
riveting enlargedto use standard mounting hardware. Order 4
nuts (29752) required to mount starter to replacement blower
198A 33290D Electric Starter Motor (120 volt) This 120-Volt starter motor
kit can be used on those models equipped with electric
starter provisions. Refer to Division 5, Section D, Page 16
for breakdown.
www.mymowerparts.com
Loading...