Page 1
Quick Start Guide
Speakers, Cross-over and Amps
PL-11 (One ribbon, one DML)Subwoofer
Weight - 68 lbs • 30.8 kg
Sub
LP 100Hz
18dB/Oct Butt 18dB/Oct Butt12dB Oct Butt
variable delay
Parametric EQ Settings:
1 - 225Hz, -4dB, Q 3.79, B/W 0.38
2 - 400Hz, -2dB, Q 4.0, B/W 0.36
3 - 1.45kHz, -3dB, Q 2.73, B/W 0.525
4 - 8.61kHz, -3dB, Q7.63, B/W 0.18
HP 100Hz LP 16kHz
18dB/Oct Butt
DML
~0.13ms delay gain -2dB
1+
1-
400W RMS 240W RMS
Subwoofer PL-12
PIN OUTS
HP 7kHz
2+
Ribbon 12ΩDML 8Ω
2-
Ribbon
(One ribbon, two DMLs)
Sub
Parametric EQ Settings:
1 - 225Hz, -4dB, Q 3.79, B/W 0.38
2 - 400Hz, -2dB, Q 4.0, B/W 0.36
3 - 1.45kHz, -3dB, Q 2.73, B/W 0.525
4 - 8.61kHz, -3dB, Q7.63, B/W 0.18
LP 100Hz
18dB/Oct Butt 18dB/Oct Butt12dB Oct Butt
Weight - 98 lbs • 45 kg
HP 100Hz LP 16kHz
18dB/Oct Butt
DML
~0.13ms delayvariable delay
PIN OUTS
1+
1-
800W RMS 240W RMS
+(425) 686-7640
HP 7kHz
2+
Ribbon 12ΩDML 4Ω
2-
Ribbon
gain -2dB
www.tectonicaudiolabs.com
Page 2
HS-12 (11)
Shackles
CGF (pr)
Temporary Live Rig
(Span set or chain hoist)
QPL (pr)
CTL (pr)
QPL (pr)
CBL (pr)
QPL (pr)
M8 Bolts
M8 Bolts
M8 BoltsM8 Bolts
00, 30, 50, 70, 100, 150 angles available
M8 BoltsM8 Bolts
CTL (pr)
QPL (pr)
EHL (pr)
(Optional pull-backs)
+(425) 686-7640
M8 BoltsM8 Bolts
www.tectonicaudiolabs.com
Page 3
Suspension Cables
Shackles
Installed Flying Rig
EHL (pr)
Bolts (pr)
5/16th x 1.25”
CTL (pr)
Bolts (pr)
5/16th x 1.25”
CBL (pr)
(Optional CGFs)
M8 BoltsM8 Bolts
M8 BoltsM8 Bolts
00, 30, 50, 70, 100, 150 angles available
M8 BoltsM8 Bolts
Bolts (pr)
5/16th x 1.25”
CTL (pr)
Bolts (pr)
5/16th x 1.25”
EHL (pr)
Suspension Cables
(Optional pull-backs)
No Bridles!
+(425)686-7640
M8 BoltsM8 Bolts
www.tectonicaudiolabs.com
Page 4
VESA Mounting
Optional VML Mount
400mm x 400mm
486 mm x 325 mm
Stand-o spacing usable
w/ adaptable mounts
Ceiling Mount
Floor Stand
M8 Bolts / Screws
1.25mm pitch
Wall Mount
+(425) 686-7640
www.tectonicaudiolabs.com
Loading...