TECshow ufotec User Manual

PAG. 2

ufoTEC - Manual

SPECIFICATION

• Weight: 3.79 kgs

• Power input: 110V-240V,50HZ/60HZ

• Wattage: 60W

• LEDs: 4*tri-9w

• Modes: DMX mode, auto running, M/S mode, sound active

• Channels: Selectable 4 CH

• Display: LED display for easier operation

• Size: 310*310*180mm

• inner box: 37*23*38cm
• master carton: 40*39*48cm

• 2 pcs/ctn

AUTO RUNNING

1. Press the “MODE”,enter the auto running mode”AUTO”.

2. Press the “SETUP”,enter the speed menu of the auto running mode “SP××”.

5. Press the “UP”or”DOWN” set up the speed value SP01~SP100 (FL).

6. Press the “SETUP”,enter the flash menu of the auto running “FS××”.

7. Press the “UP”or “DOWN” set up the flash value FS00~99.

DMX MODE

1. Press the “MODE”,enter the DMX mode “d×××”.

2. Press the “UP”or “DOWN”,set up the DMX address value d001—d512.

3. Press the “SETUP”,enter the DMX working mode 4CH.

DMX agreement:

CHANNEL VAL U E FUNCTION NOTES

1 (Mode)

000-009 BLACKOUT

010- 019 R
020-029 G
030-039 B
040-049 RG
050-059 RB
060-069 GB

070-079 RGB
080-200 AUTOMATIC

201-255 SOUND-ACTIVITY

2 (Strobe)

000-009 NO STROBE

WORKS ONLY WHEN CH 1 IS BETWEEN 010-200

010-255 STROBE SLOW TO FAST

3 (Speed)

000-009 NO FUNCTION

WORKS ONLY WHEN CH 1 IS BETWEEN 080-200 (AUTO)

010-255 SLOW TO FAST

4 (Motor)

000-009 NO ROTATION

WORKS ONLY WHEN CH 1 IS BETWEEN 010-079

010-119 ROTATE LEFT FAST TO SLOW
120-14 5 STOP
146 -25 5 ROTATE RIGHT SLOW TO FAST