TECshow Quatrobeam Move User Manual

USER MANUAL / MANUAL DE USUARIO

PLEASE READ THE INSTRUCTIONS CAREFULLY BEFORE USE /

POR FAVOR LEA LAS INSTRUCCIÓNES ANTES DE USAR

DMX LED MOVING HEAD,

4-IN-1 10W RGBW

QUATROBEAM MOVE

A. Overview

Quatrobeam Move is a beam moving head with 4 high
power outputs. Equipped with 4 x 10W RGBW LEDs, its
movements are fast and accurate. With strobe function,
pixel by pixel control and its compact design, this fixture
comes to redefine the horizon of your lighting schemes.
Quatrobeam Move has 9 built-in programs and a 26
channel DMX extended mode that gives you total control
over the unit.

Specifications

Source & Optics

• Light Source: 4-in-1 10W RGBW

• LEDs life: 60,000 hs.

• Beam angle: 1.8º

Photometric data

Luminous flux:

• Red: 2439 Lux @ 2m (6.5 .)

• Green: 4843 Lux @ 2m (6.5 .)

• Blue: 980 Lux @ 2m (6.5 .)

• White: 6948 Lux @ 2m (6.5 .)

Eects & Functions

• LED Moving Head with 4 outputs

• Pixel by pixel control

• Razor sharp beams

• Fast & precise movements

• 9 built-in programs

• Dimmer: Full range 0-100%

• Strobe eect

• Compact design

Movement

• Pan: Endless rotation

• Tilt: 200°

• High-speed motors

Control

• Operational modes: Sound Active, Auto-run,

DMX & Master/Slave

• DMX Channels: 1/22/26

• Built-in microphone

• Operating temperature: 10ºC~40ºC

Electrical

• Input voltage range: AC 100V-240V, 60Hz/50Hz

• Power consumption: 70W

Physical

• 4-digit LCD display

• Power supply connector: Powercon® In/Out

• DMX connectors: 2 XLR connectors (XLR-3 In and

Out)

• Dimensions: 555x95x210 mm. / 21.8x3.7x8.2 in.

• Weight: 6.8 Kg. / 15 Lbs.

ENGLISH VERSION

P. 2

QUATROBEAM MOVE

B. Operation

There are many types of lighting eects for this
fixture, there are five working modes.

• Auto running

• Build-in program

• Sound-active mode

• DMX mode

• Slave mode

C. Function description

ENGLISH VERSION

P. 3

QUATROBEAM MOVE

LCD Menu Structure chart

ENGLISH VERSION

P. 4

QUATROBEAM MOVE

1. Auto running

When the display shows “AUTO”, the light will run as the
program which had been set. Press “SETUP” button to
enter into the optional menu. Press “UP” and DOWN” to
choose the optional which need to set the parameter as
below: Led, Pan or Tilt.

• LED function

1. When choose “Led”, and press “SETUP”
enter to LED auto running parameter setting.
The option with black marks is selected. You
could choose “Auto”, “Color” or “Dimmer”.
When choose “Auto”, press “SETUP” button
enter to setup menu.
Press “UP” and “DOWN” to select the param­eter. When choose “Speed”, press “SETUP” to
choose the speed menu of the auto running.
Press “UP” and “DOWN” to adjust the auto
running speed from 01-20.
When choose “Freq.”, press “SETUP” to set
the flash speed.
Press “UP” and “DOWN” to adjust the flash
speed 00-20Hz.

2. When choose “Color”, press the “SETUP”
to set the parameter. Choose “Static” and
press “SETUP” again to enter color program.
Press “UP” and “DOWN” to choose relative
color.

3. When choose “Dimmer”, press the “SET­UP” to set the parameter. When choose
“RED”, “GREEN”, “BLUE” or “WHITE”,

press “SETUP” to enter relative gray level:
0-255. When choose “Freq. ”, press “UP” and
“DOWN” to set the flash speed 00-20Hz.

• Pan function

• When choose “Pan”, press “SETUP”

enter the functzion choose menu.
Pan has 4 modes, p-Auto, p-Manul, p-CW and

p-CCW.

1. When choose “p-Auto”, pan enters to

build-in program.

2. When choose “p-Manul”, pan stops in set­ting location. Press “SETUP” enters to set pan
location. Press “UP” and “DOWN” to adjust
the location: 0—540 degrees.

3. When choose “p-CW”, Pan turns with
clockwise direction (from the LED light). Press
“SETUP”, enter to set Pan speed setting.
Press “UP” and “DOWN” to adjust the speed:
1-16.

4. When choose “p-CCW”, Pan turns with
anti-clockwise direction (from the LED light).
Press “SETUP”, enter to set Pan speed set-
ting. Press “UP” and “DOWN” to adjust the
speed: 1-16.

• Tilt function

1. When choose “Tilt”, press “SETUP” enter
the function choose menu.

2. Pan has 2 modes, t-Auto and p-Manul.

3. When choose “t-Auto”, Tilt enters to

build-in program.

4. When choose “t-Manul”, Tilt stops in set­ting location. Press “SETUP” enters to set tilt
location. Press “UP” and “DOWN” to adjust
the location: 0—200 degrees.

2. Build-in program

When display shows ”SHOW”, it enter to the build-in
program.
Press “SETUP” to enter the build-in programs. There are
9 programs inside. Press “UP” and “DOWN” to choose
the built-in program from Show1 –Show9 (the built-in
program is pre-set and can’t be reset).

3. Sound-active Mode

When display shows “SOUND”, enter the sound-active
mode.

ENGLISH VERSION

P. 5

QUATROBEAM MOVE

Press “SETUP” enters the menu of adjusting the sound
sensitivity. Press “UP” and “DOWN” to adjust the sen­sitive value from 0-31.

4. DMX Mode

When display shows “DMX”, enter the DMX mode.
Press “SETUP” enters to the main menu: “Address”
and “Channel”. Press the “UP” or “DOWN” to choose
the option.

• When choose “Address”, press the “SETUP”

enters to the address menu, set the DMX address 1-512
through “UP” and “DOWN”.

1-ch

CHANNEL NUMBER FUNCTION

1

0-29 LED close

30-44 Built-in program Show1

45-59 Built-in program Show2

60-74 Built-in program Show3

75-89 Built-in program Show4

90-104 Built-in program Show5

105-119 Built-in program Show6

120-134 Built-in program Show7

135-149 Built-in program Show8

150-164 Built-in program Show9

165-194 LED close

195-255 Sound active, the sensitivity will be

higher when the value is larger.

• When choose “Channel”,press “SETUP” enter

to set the DMX channel through “UP” and “DOWN”.

• There are three channels: 1-ch, 22-ch, and

26-ch (choose 22-ch to restore factory settings).

This product has automatic identification functions.
Once receive DMX signal, the fixture will enter the DMX
mode. Once the signal disappears, the fixture will return
the previous mode.
When LCD shows “DMX IN”, it means it enter the DMX
mode.

DMX Mode 1: 1-ch

ENGLISH VERSION

P. 6

QUATROBEAM MOVE

22-ch

CHANNEL NUMBER FUNCTION

1 0-255 Pan 0-540°

2 0-255 Pan fine turning

3 0-255 Tilt 0-200°

4 0-255 Tilt fine turning

5 0-255 Pan/Tilt Speed The speed is

lower when the No. is larger.

6 0-129 No function

130-192 The speed is from fast to low

when pan moves forward.

193-255 The speed is from low to fast

when pan moves forward.

7 0-255 LED1 R 0-100%

8 0-255 LED1 G 0-100%

9 0-255 LED1 B 0-100%

10 0-255 LED1 W 0-100%

11 0-255 LED2 R 0-100%

12 0-255 LED2 G 0-100%

13 0-255 LED2 B 0-100%

14 0-255 LED2 W 0-100%

15 0-255 LED3 R 0-100%

16 0-255 LED3 G 0-100%

17 0-255 LED3 B 0-100%

18 0-255 LED3 W 0-100%

19 0-255 LED4 R 0-100%

20 0-255 LED4 G 0-100%

21 0-255 LED4 B 0-100%

22 0-255 LED4 W 0-100%

DMX Mode 2: 22-ch

ENGLISH VERSION

P. 7