TECshow Pinspot LED Bar User Manual

P. 1

| Tecshow Pins pot LED Bar

PINSPOT LED BAR

Spot lighting Bar - 6 WW 5W LEDs

USER MANUAL / MANUAL DE USUARIO

PLEASE READ THE INSTRUCTIONS CAREFULLY BEFORE USE

POR FAVOR LEA LAS INSTRUCCIÓNES ANTES DE USAR

P. 2

Tecshow Pins pot LED Bar |

Pinspot LED Bar

Spot lighting Bar - 6 WW 5W LEDs

Pinspot LED Bar is a compact spot lighting bar that
sports 6 projectors equipped with 5W LEDs. With a
color temperature of 3000K and a 4º beam angle,
the equipment is ideal for spot table, decorative
or commercial applications. Pinspot LED Bar is
eqquiped with power input and output connectors,
allowing up to 30 units to be connected between
them. Individually adjustable projectors, long life
LEDs and a lightweight but resistant design make
Pinspot LED Bar an ideal alternative for applications
such as weddings & social events.

Specications

Source & Optics

• Light Source: 6 Warm White 5W LEDs

• LEDs life: 20,000 hours

• Beam angle: 4º

• Color temperature: 3000K

Photometric data

• Lumens: 240 lm

• Light Spot: ø 50 cm @ 3M (10 .) / ø 80 cm @ 5M

(16 .)

Eects & Functions

• Manually adjustable projectors

• Lightweight & durable design

• Connected to a traditional dimmer, the projec­tors intensity can be adjusted at the same time

• Daisy-chain: Up to 30 units

Control

• Operational mode: Plug & Play

Physical

• Power supply connectors (In/Out)

• Dimensions:1087x52x235 mm. / 42.7x2x9.2 in.

• Weight: 3.6 Kg. / 8 Lbs.

1. OVERVIEW

English version

P. 3

| Tecshow Pins pot LED Bar

English version

2. WARNING

Like all electronic products, Pinspot
LED Bar must be used with common
safety precautions in mind.

• This appliance must be earthed.

• The unit contains no user-serviceable parts.

Refer servicing to qualied technicians only.

• The electrical installation should be carried

out by qualied personal only, according to

the regulations for electrical and mechanical
safety in your country.

• Disconnect from electric mains power supply
before removing covers or changing spare
parts. Keep case closed while operating.

• Do not insert objects into air vents.

• Keep away from ames and ammable mate-
rial. Keep away from liquids. Never operate in
rain or in damp conditions.

• If eect lights are dropped or struck, discon­nect mains power supply immediately. Have

a qualied engineer inspect for safety before

operating.

• LED and metal become hot during operation.
Allow time to cool before handling.

• Not suitable for mounting on normally am-
mable surfaces. Disconnect from mains supply
before removing cover. Minimum distance to
lighted object is 0.4m.

• Without changeable structure by non-qualied
user, please do not open the cover or have any
change at will, otherwise, it may cause accident!

• The appliance is for adult use. Keep out of
reach of children. Never leave the unit running
unattended.

• Please use the original packing (recommend)
when the device is to be transported.

• Maximum save ambient temperature is 40°C.
Don’t use this unit at higher ambient tempera­tures.

• Due to safety reasons it is prohibited to make

unauthorized modications to the unit.

• To protect the environment, please try to recy­cle the packing material as much as possible.

• Read user manual instructions thoroughly
before operating. Follow the instructions. Never
remove warning or information labels from the
unit.

Caution

There are no user serviceable parts inside this unit.
Do not attempt any repairs yourself, doing so will
void your manufactures warranty. In the unlikely
event your unit may require service please contact
your local dealer.

Particular Warning

Never look directly into the light source! Don’t use

the eect in the presence of persons
suering from epilepsy. Please install the

product correctly according to the in­struction of the user manual. To avoid any accident,
it is not allowed to install the product with any
way not instructed on the user manual. If accident
happens because users do not install the product
according to the instruction of the user manual, the
manufacturer will not take any responsibility.

Please Note

Specications and improvements in the design

of this unit and this manual are subject to change
without any prior written notice.

Important

The wires in this mains lead are colored in ac­cordance with the following code.
EU

Green and Yellow - Earth (E)
Blue - Neutral (N)
Brown - Live (L)

Warning: This appliance must be earthed.

P. 4

Tecshow Pins pot LED Bar |

English version

USA

Green and Yellow - Earthed (E)
White - Neutral (N)
Black - Live (L)

Warning: This appliance must be earthed.

3. FUNCTIONS

A. Lighting bar
B. Projecting LED light (6 pcs)
C. Safety Ring (removable)
D. Power Input
E. Power Output
F. Safety Hole

A

D B E

C F

P. 5

| Tecshow Pins pot LED Bar

English version

4. DESCRIPTION

5. GETTING READY

• • The Pinspot LED Bar is a projecting light made
specially for wedding site, variety of parties,
and commercial venues, etc.

• A compact projecting light equipped with 6
LEDs of 5W.

• Beam Angle only 4 degree, and 3000K warm
white color temperature.

• Pinspot LED Bar is equipped with power input

and output, maximum 30 units of Pinspot LED

Bar can be connected.

• Could connected to a traditional dimmer, the 6
LEDs can be adjusted at the same time.

• Rugged high-quality shape designed with

All products are thoroughly tested at the factory
and shipped in perfect condition. If damage has oc­curred during shipping, or if components are miss­ing, please contact your local dealer immediately.

Your package should include:

• One Pinspot LED Bar

• One product user manual

strong bracket.

• Super durable for 24-hour use. Complete cold

light source excludes overheat problem.

• LED light source of long life (>20,000 hr. Rat-

ed), greatly reduce the trouble of changing the

lamp.

• Light-weight and streamline exterior design
makes the movability of the machine and more
convenient to be used for any locations.

P. 6

Tecshow Pins pot LED Bar |

English version

6. INSTALLATION INSTRUCTIONS

Pinspot LED Bar is shipped complete, ready to use.
The bracket is installed before shipping, the unit
can be hung in any position. Fasten the Pinspot LED
Bar onto rm trussing (Use a 10-kg rated or strong­er C-clamp bolted onto the bar, enhancing safety

necessarily with safety cables). Allow enough space
(around 20cm) on all sides for proper cooling.

Single installation

Important: Aer the installation is completed,

please check the installation line rst, conrm the

installation without error, without electrical short
circuit, connect the corresponding control power.

C-clamp

C-clamp

Safety cables