TECshow kraftTEC User Manual

Page 1
Page 2
PAG. 2
kraftTEC - manual
Our LED double moon-flower light offers many wonderful effects which are very magic. It is designed for professio­nal places, such as stages, disco, night clubs etc. please read the manual before operation.
SPECIFICATION.
Weight: 3.5 kgs
Voltage: 110V-240V,60HZ/50HZ
power consumption: 36W
LEDs: 2*10W 4-in-1(RGBW) CREE
Beam angle: 28 degree
Function: DMX Mode,Auto Run, M/S Mode, Sound Active
DMX channel: 5 CH
LED display for easier operation
inner box: 39*28*32cm
master box: 40*29*66cm
2pcs/ctn
A.AUTO RUNNING
1. Press the “MODE”,enter the auto running mode”AUTO”.
2. Press the “SETUP”,enter the speed menu of the auto running mode “SP××”.
5. Press the “UP”or”DOWN” set up the speed value SP01~SP100 (FL).
6. Press the “SETUP”,enter the flash menu of the auto running “FS××”.
7. Press the “UP”or “DOWN” set up the flash value FS00~99.
B.DMX MODE
1. Press the “MODE”,enter the DMX mode “d×××”.
2. Press the “UP”or “DOWN”,set up the DMX address value d001—d512.
3. Press the “SETUP”,enter the DMX working mode 5CH.
DMX agreement
CHANNEL VA LUE FUNCTION NOTES
1 (Mode)
000-009 BLACKOUT
010-019 R 020-029 G 030-039 B 040-049 W 050-059 RG 060-069 RB
070-079 RW 080-089 GB 090-099 GW
100-109 BW
110 -11 9 RGB 120-129 RGW 130-139 RBW 140-149 GBW 150-159 RGBW 160-2 29 AUTOMATIC
230 -255 SOUND-ACTIVATED
2 (Strobe)
000-009 NO STROBE
010-229
010-255 STROBE SLOW TO FAST
3 (Speed)
000-009 NO FUNCTION
WORKS ONLY WHEN CH 1 IS BETWEEN 160-229 (AUTO)
010-255 SLOW TO FAST
Page 3
PAG. 3
4 (Motor1)
000-009 NO ROTATION
WORKS ONLY WHEN CH 1 IS BETWEEN 010-159
010-119 ROTATE LEFT FAST TO SLOW 120-145 STOP
146 -25 5 ROTATE RIGHT SLOW TO FAST
5 (Motor2)
000-009 NO ROTATION
WORKS ONLY WHEN CH 1 IS BETWEEN 010-159
010-119 ROTATE LEFT FAST TO SLOW 120-145 STOP
146 -25 5 ROTATE RIGHT SLOW TO FAST
C. SLAVE MODE
Press the”MODE”, enter the slave mode “SLAV”.
D. SOUND ACTIVE MODE
Press the “MODE” enter the sound active mode “SoUn”.
E. TURN ON OR OFF THE LED DISPLAY
1. Press the “MODE”enter the turn on or off the LED display mode “LED”.
2. Press the “SETUP” enter the LED display turn on or off.
3. Press the “UP”or “DOWN”,set up the the LED display stay on or off. Remarks: when it is on, the LED display will light up all the way. When it is off, the LED display will turn off after 30 seconds.
LED INVERSION DISPLAY
1.Press the “MODE”,enter the mode of the LED inversion display menu”dISP”.
2.Press the “SETUP” to choose the LED standard display”dISP”or inversion display”dSIP”
F. VERSION DISPLAY
1. Press the “MODE”to enter the menu of the version display“Ver”.
2. Press the “SETUP”,it will shows the version No.as V10.
ENGLISH .
Page 4
PAG. 4
kraftTEC - Manual en Español
El Led double moon flower ofrece efectos de luz maravillosos y mágicos. Se encuentra diseñado para su utiliza­ción en escenarios, discotecas, bares, etc. Lea el presente manual antes de utilizar el producto.
EPECIFICACIONES TECNICAS
Dimensiones: 233 x 280 x 343 mm
Peso: 3.5 kgs
Potencia de entrada: 110V-240V,60HZ/50HZ
Consumo: 36W
Indicadores LED: 2*10W 4-in-1(RGBW) CREE
Angulo de Beam: 28º
Modos: DMX, Mode, Auto Run, M/S y Sound Active
Canales DMX: 5 CH
Pantalla LED para facilitar la operación de la unidad
Caja interior: 390 x 280 x 320 mm
Embalaje: 400 x 290 x 660 mm
Contenido: 2 piezas
A. Modo AUTO RUNNING
1) Presione la tecla “MODE” para ingresar al menú del modo Auto Running “AUTO”.
2) Presione la tecla “SETUP” para ingresar al menú de configuración de velocidad “SPXX”.
3) Utilice las opciones “UP” o “DOWN” para seleccionar el valor de velocidad deseado en el rango “SP01~SP100” (FL).
4) Presione la tecla “SETUP” para ingresar al menú de configuración de la función flash “FSXX”.
5) Utilice las opciones “UP” o “DOWN” para seleccionar el valor de flash deseado en el rango “FS00~99”.
B. Modo DMX
1) Presione la tecla “MODE” para ingresar al menú del modo DMX “dXXX”.
2) Utilice las teclas “UP” o “DOWN” para configurar el valor de la dirección DMX deseada en el rango “d001-­d512”.
3) Presione la tecla “SETUP” para ingresar al modo de operación DMX de 5 canales.
Operación DMX:
CANALES VALO R FUNCION NOTA S
1 (Modo)
000-009 BLACKOUT
010-019 R
020-029 G 030-039 B 040-049 W 050-059 RG 060-069 RB
070-079 RW 080-089 GB 090-099 GW
100-109 BW
110 -11 9 RGB 120-129 RGW 130-139 RBW 140-149 GBW 150-159 RGBW
160-2 29 AUTOMATIC 230 -255 SOUND-ACTIVATED
2 (Estrobo)
000-009 NO STROBE
010-229
010-255 STROBE SLOW TO FAST
3
(Velocidad)
000-009 NO FUNCTION
FUNCIONA SÓLO CUANDO EL VALOR DEL CH 1 SE
ENCUENTRA ENTRE 160-229 (AUTO)
010-255 SLOW TO FAST
Page 5
PAG. 5
4 (Motor1)
000-009 NO ROTATION
FUNCIONA SÓLO CUANDO EL VALOR DEL CH 1 SE
ENCUENTRA ENTRE 010-159
010-119 ROTATE LEFT FAST TO SLOW 120-145 STOP
146 -25 5 ROTATE RIGHT SLOW TO FAST
5 (Motor2)
000-009 NO ROTATION
FUNCIONA SÓLO CUANDO EL VALOR DEL CH 1 SE
ENCUENTRA ENTRE 010-159
010-119 ROTATE LEFT FAST TO SLOW 120-145 STOP
146 -25 5 ROTATE RIGHT SLOW TO FAST
C. Modo SLAVE
Presione la tecla “MODE” para ingresar al menú del modo Master/Slave “SLAV”.
D. Modo SOUND ACTIVE
Presione la tecla “MODE” para ingresar al menú del modo Sound Active “SoUn”.
•Encendido/ apagado de la pantalla LED
1) Presione la tecla “MODE” para ingresar al menú de encendido de la pantalla “LED”.
2) Presione la tecla “SETUP” para activar (“ON”) o desactivar (“OFF”) la visualización en pantalla LED.
3) Utilice las opciones “UP” o “DOWN” para seleccionar las funciones “ON” u “OFF”.
Nota: Tenga en cuenta que, si selecciona la opción “ON”, la pantalla LED permanecerá encendida. Por el contrario, si selecciona la opción “OFF”, la pantalla se apagará luego de transcurridos 30 segundos.
E. Inversión de pantalla LED
1) Presione la tecla “MODE” para ingresar al menú de inversión de la pantalla “dISP”.
2) Presione la tecla “SETUP” para configurar una visualización en pantalla estándar (“dISP”) o bien para invertir la visualización (“dSIP”)
F. VERSION
1) Presione la tecla “MODE” para ingresar al menú correspondiente a la versión del producto “Ver”.
2) Presione la tecla “SETUP” para visualizar la versión de la unidad “V10”.
Loading...