TECshow ION 740z User Manual

P. 1

| Tecshow ION 740 z

USER MANUAL / MANUAL DE USUARIO

PLEASE READ THE INSTRUCTIONS CAREFULLY BEFORE USE

POR FAVOR LEA LAS INSTRUCCIÓNES ANTES DE USAR

I O N 740z

Moving head powered by 7 x 4-in-1

OSRAM® 40W LEDs

P. 2

Tecshow ION 740 z |

ION 740z

Moving head powered by 7 x 4-in-1 OSRAM® 40W LEDs

ION 740z is a versatile moving head powered by 7
x 4-in-1 OSRAM® 40W LEDs with a variable zoom that
goes from 4º to 36º. Versatility and power output get
new meanings thanks to the enormous action ca­pacity brought by its beam angle variation, the pixel
by pixel control and it’s outstanding lighting perfor-

mance, with 43,000 lux @ 15 . (4º). This moving head

is equipped with quad-color LEDs, enabling a smooth
RGBW mix with no multicolor shadows and assuring a
real long life performance. Ion 740Z comes also with
preset programs on 2700K, 3200K, 4200K, 5600K and
8000K color temperatures and it’s RDM-compatible
allowing the user to monitor and address the unit re­motely.

Specications

Source & Optics

• Light Source: 7 x 4-in-1 OSRAM® 40W LEDs

• LEDs life: 60,000 hours

• Beam angle: 4° to 36°

Photometric data

• Luminous ux: 7000 lumen

• 4º beam angle: 43000 lux @ 3m (10 .)

• 36º beam angle: 2400 lux @ 3m (10 .)

Eects & Functions

• Pixel by Pixel control

• Dimmer: Full range 0-100%

• Strobe eect

• Quad-color LED technology: Smooth RGBW mix
with no multi colored shadows

• Vivid, saturated and uniform colors

• Color temperature presets: 2700K, 3200K,
4200K, 5600K & 8000K

Control

• DMX Channels: 19/21/22/51

• Advanced RDM Function

• Indicated temperature for base, arm & lamp

• IC backup communication

• RDM read voltage, current power consump­tion of the lamp

• Soware update vía DMX

• Fan speed based on temperature

Movement

• Pan: 540° / 630º

• Tilt: 265°

• 3-phase motor

• 16-bit resolution

• Auto repositioning

Physical

• DMX Connectors: 2 XLR connectors (XLR-3 In/
Out) & 2 RJ45 connectors (Ethernet In/Out)

• Power supply connectors: PowerCON® In/Out

• 2.4 inches LCD graphi

• c display

• Dimensions: 324x250x456 mm. / 12.7x9.8x17.9
in.

• Weight: 12 Kg. / 26.4 Lbs

• Dimensions: 264.5x168x368 mm. /

10.4x6.6x14.4 in.

• Weight: 5.1 Kg. / 11 Lbs.

1. OVERVIEW

English version

P. 3

| Tecshow ION 740 z

Before unpack the xture, pls make sure that the packing is

in good condition, following items will be found in the box:

• The xture

• This users guide

• 3m DMX cable

• 1.5m power cable with powercon

• Omega bracket for hanging installation

• Safety chain

English version

P. 4

Tecshow ION 740 z |

2. DESCRIPTION OF THE DEVICE

English version

1. Project lens

2. Head

3. Arm

4. Base

5. Display

6. Foot stand

7. Operation button

8. Handel

1

2

3

4

5

6

7

8

9. Wireless indicator

10. Mic

11. Le button

12. Battery indicator

13. Up button

14. Down button

15. Enter button

16. Right button

17. Ethernet out

18. 5-pin DMX in

19. Ethernet in

20. 5-pin DMX out

21. Powercon in

22. Fuse

9 10 11 121713181419152016

21 22

P. 5

| Tecshow ION 740 z

Before operate this unit, please carefully read this users guide and keep if needed in future. It’s
necessary to respect following rules.

The disposal of the device aer lifecycle could damage the environment, need to take it to spe­cial company for recycling or return to authorized dealer.

The products referred to in this manual conform to the European Community Directives and
are therefore marked with CE logo.

Keep this device away from children and unauthorized users, the manufacturer will not take
responsibility for the damage due to any disregard of the information provided in this manual
and wrong operation.

Before operate the device, pls make sure the xture is in good housing, ensure pan and tilt can

rotate in its complete range.

Please make sure minimal 0.5m distance need to kept between the xture to any ammable

material.
The device can only run with 100-240v voltage, 50/60Hz power, don’t connect to any other

wrong power. Disconnect the device from main power before open the shield or maintenance.
The device is designed only for indoor usage, pls keep it away from moisture. Do not expose

the device under the sun or directly to any other lighting source.

Never look directly into the projecting lens when the xture is power on, the light may trigger
epileptic seizures in photosensitive persons or persons with epilepsy. Especially at beam eect,

extreme caution and observance of these safety instructions is mandatory.

Don’t put or install the device on a surface that subject to vibration or bumps.

Ta=45°c

The device is supposed to work in the temperate range -15° C and +45° C, do not use the device
when the temperate exceed this range.

The lens, shield need to be replaced when obviously broken, never use the device when the
shield is not completed closed.

Safety I class device, need to be earth connected.

When the xture is hanged overhead, the safety rope must be xed to the bottom of the device
to the appropriate xing point.

Always carry the device by the handles, do not take the head or arm directly for transportation.

3. SAFETY AND MAINTENANCE INFORMATION

English version

0,5m

Safety Info

P. 6

Tecshow ION 740 z |

• Operation only allowed to qualied person,
damages due to unprofessional operation or re­move of any parts inside will not be considered
in warranty service. There are no serviceable
parts inside the device or package, service only
leaves to authorized dealers.

• Never allow the optical components contact

with oil, fat or any other liquid.

• A regular clearance of the device is needed for
long-term usage, this is very helpful to maintain

the lifetime and brightness need to use a so

and lint-free cloth to clean the optical system,

fan and air owing tunnel.

Trouble Shooting

Maintenance

English version

Problems Possible reasons Checking or solutions

Device not power up

Powercon or power cable damaged
Faulty power supply

Change a good power cable to try
Replace new power supply

Pan/Tilt error or vibrate

Faulty Pan/Tilt PCB
Faulty opto sensor
Cable loosen

Replace PT001 PCB
Replace opto sensor OP001
Check the cable connect to OP001

LED o

Temperature protection
Fan not working
Faulty LED
Dimmer and strobe set at 0
Faulty power supply

Check the temperature from menu
Check the fan speed info from menu
Replace new LED
Set dimmer and strobe channel at 255
Replace new power supply

Device not response

to DMX

Faulty communication IC
Faulty display PCB
Wrong DMX addressing
Faulty DMX cable

Replace the IC with back-up one in the
display PCB
Replace new display PCB
Check the address and setting
Change to a good DMX cable

P. 7

| Tecshow ION 740 z

Need to replace with same type and rating, which
originally installed in the device.

• Step One: Unplug power cable from main
power.

• Step Two: Unscrew the fuse holder out of the
housing with a screwdriver.

• The device could be either put on a
solid and even Surface, or mounted

upside down or sideways like le

picture.

• The mounting place must be suicient
stable and be able to support a weight
of 10 times of the unit’s weight. When
the xture is hanged, always addition­ally secure the device with the safety
chain, fasten the safety rope at a suit­able position so that the maximum fall
of the projector will be 20 cm.

• Step Three: Remove the broken fuse and re­place with an exact same type of new fuse.

• Step Four: Insert the fuse holder back to the
housing and screw tight and reconnect power.

Replacement of the fuse

English version

4. INSTALLATION

P. 8

Tecshow ION 740 z |

English version

• Step one: Installation the clamp onto the
omega bracket;

• Step two: Install the clamp and bracket on the
bottom of panel, fasten the quick-locks;

• Step three: Install the whole device onto ap-

Meaning of the icon in menu

propriate truss and fasten the clamps, tight the

safety rope with the truss or other xing point

at a suitable position that drop down distance
not exceed 20 cm.

How to do mounting installation

5. CONTROL MENU

CONNECT LIGHT INFOMATION

SET PROGRAM

P. 9

| Tecshow ION 740 z

English version

Default setting shadowed. mark with 1 can be basic reloaded, 2 be program reloaded, 3 can be private
reloaded.

Menu tree

Connect

DMX Address 1 XXX DMX address setting
Wireless 1 (Wireless Module) Wireless Enabled
Artnet 1 (Only Artnet Module) Artnet Enabled

Light

Max Temperature 1 80~139°C /176~282° F Lamp o if temperature continu-

ously over for 2minutes

Lamp Adjust 1 PAN Adjust value of channel

Information

Time Info. Current XXXX (Hours)

Fixture Life XXXX (Hours)
Lamp Life XXXX (Hours)

Fixture boot time
Fixture total run time
Lamp total run time

Lamp Info. Voltage

Current
Power

HID Lamp Information

Temperature Near Lamp Temp (depends on

xture)

Temperature Sensors

Fans Speed Near Lamp Fan (depends on

xture)

Fan speed Sensors

Channel Value PAN Display value of channel
Error Message Pan, Tilt Error channels
Fixture Model xxxxxxxxxxxx Display model brand and model
Soware Ver 1U01 V1.0.00 Version of each IC

Set

Reset All

Pan&Tilt
:

Reset all
Reset Pan&Tilt
:

Movment Pan Reverse 1

Tilt Reverse 1
Pan Degree 1
Encoders 1
Pan/Tilt Mode 1

ON/OFF
ON/OFF
630/540
ON/OFF
Stand/Smooth

Pan Reverse
Tilt Reverse
Choose Pan Degree

Encoder wheel on/o

Choose pan/tilt mode

UI Set Mic Sens. 3

No Signal 1
Temperature. C/F

1

Fans Mode 1
Hibernation 1
Backlight 1
Flip Display 1
Display Bright 3
Brand Show 1
Key Lock 1
Language 3

0~99%,60%
Close/Hold/Auto/
Music
Fahrenheit /Celsius
Auto Speed /High
Speed
OFF, 01M~99M, 15M
02~60m 02m
ON/OFF
00~31 10
ON/OFF
ON/OFF

En/Fr/Sp/简/简

Sensitivity of Mic
Mode when no signal
Temperature at °C/°F
Fans mode
Sleeping mode
Show backlight time
Display 180°reverse
Display Brightness
Show brand or not

Key lock on/o

Language Select

Fixture Set Theater Mode ON/OFF Theater Mode

P. 9

English version | Tecshow ION 740 z

P. 1 0

Tecshow ION 740 z |

English version

Pan Degree 1
Encoders 1
Pan/Tilt Mode 1

630/540
ON/OFF
Stand/Smooth

Choose Pan Degree

Encoder wheel on/o

Choose pan/tilt mode

UI Set Mic Sens. 3

No Signal 1
Temperature. C/F 1
Fans Mode 1
Hibernation 1
Backlight 1
Flip Display 1
Display Bright 3
Brand Show 1
Key Lock 1
Language 3

0~99%,60%
Close/Hold/Auto/
Music
Fahrenheit /Celsius
Auto Speed /High
Speed
OFF, 01M~99M, 15M
02~60m 02m
ON/OFF
00~31 10
ON/OFF
ON/OFF

En/Fr/Sp/简/简

Sensitivity of Mic
Mode when no signal
Temperature at °C/°F
Fans mode
Sleeping mode
Show backlight time
Display 180°reverse
Display Brightness
Show brand or not

Key lock on/o

Language Select

Fixture Set Theater Mode ON/OFF Theater Mode
Users User Mode 1 Standard

Extended
:
User

Standard mode
Extended mode
:
User program mode

Edit User 3 Max Channel = XX

PAN = CH01
:

Edit users mode

Calibration 3 -Password-

Pan
:

=XXX
=XXX
:

Password: 050
Calibrate channel value

Fixture ID 3 Name

-Password­PID Code

Name
Password: 050
Set PID of RDM

Wireless Set 1

(Wireless Module)

DMX On Cable
Reset Connect

ON/OFF
ON/OFF

DMX Send Out
Reset Connect

Ethernet Set 3

(Only Artnet Mod­ule)

IP Address
IP Mask
Universe
DMX On Cable

2.x.x.x

255.0.0.0
0
ON/OFF

Ethernet Set

(Only Artnet Module)

Reload Default Basic Reload(1)

Program Reload(2)

---Password---

Private Reload(3)

All Reload
Update Fixture

ON/OFF
ON/OFF
XXX
ON/OFF
ON/OFF
ON/OFF

Basic Reload
Program Reload
Password: 050
Private Reload
All Reload

Soware upgrade

P. 11

| Tecshow ION 740 z

English version

Program

Play 1 DMX Receive

Slave Receive
Sequence
Music

Slave Receive 1,2,3
Master / Alone
Master / Alone

DMX Receive
Choose slave posi­tion
Run Sequence
Music mode

Select Chase 2 Chase Part 1

Chase Part 2
Chase Part 3

Chase 1 ~ 8 Chase 1
Chase 1 ~ 8 Chase 2
Chase 1 ~ 8 Chase 3

Select and run auto
program

Edit Chase 2 Chase 1

:
Chase 8

Chase Test
Step 01
Step 64

=SCxxx
=SCxxx

Test
Beginning scene
Ending scene

Edit Scenes 2 Edit Scene 001

~ Edit Scene 250

Pan,Tilt,……

--Fade Time--

--Secne Time-­DMX Input

=xxx
=xxx
=xxx

Input manual scene
Modify manually
fading time
Modify manually
scene time
Input scene from
exterior controller

Scenes Record ScXX=>ScXX Auto Input scenes

6. DMX CONNECTION AND DMX PROTOCOL

DMX addressing

• The device is controlled by universal DMX 512
protocol, DMX address is the start channel
used to receive instructions from the exter­nal controller. For independent control, each

xture must be assigned its unique address

control channels. For example, this device has
four channel modes: 22/51/19/21, if we set
the mode at standard 22 channels mode, and
there are several models need to be inde­pendently controlled, we just simply address

rst xture at 1, and second xture at 23, third

one at 45, etc.

• If the devices have the same address, they will
behave synchronically.

• DMX addressing is limited, don’t set the address
so high that without enough control channels

for the xtures.

• Display is ashing when no DMX signal is re-
ceived.