TECshow ION 1915Z, Ion 3715Z, Ion 715Z User Manual
ION 1915Z
USER MANUAL / MANUAL DE USUARIO
PLEASE READ THE INSTRUCTIONS CAREFULLY BEFORE USE
POR FAVOR LEA LAS INSTRUCCIÓNES ANTES DE USAR
p. 2ION 1915Z
ENGLISH VERSION
Overview
Ion 1915Z is a versatile moving head powered by 19 x 4-in-1
OSRAM® 15W LEDs that sports a variable zoom that goes from
6º to 60º. Versatility and power output get new meanings
thanks to the enormous action capacity brought by its beam
angle variation, the pixel by pixel control and the highlighted
optics design. This moving head is equipped with quad-color
LED technology, enabling a smooth RGBW mix with no multicolor shadows. The unit comes also with preset programs on
2700K, 3200K, 4200K, 5600K and 8000K color temperatures.
Ion 1915Z is not only a beam & wash moving head with pixel
mapping, but also has the velocity and reaction capacity of
the most compact moving heads in the industry.
Specications
Source & Optics
Light Source: 19 x 4-in-1 OSRAM® 15W LEDs
LEDs life: 60,000 hours
Beam angle: 6° to 60°
Photometric data
Luminous ux: 8000 lumen
6º beam angle: 21880 lux @ 3m (10 .)
60º beam angle: 1600 lux @ 3m (10 .)
Eects and functions
Pixel mapping: Pixel by pixel control
Dimmer: Full range 0-100%
Strobe eect
Quad-color LED technology: Smooth RGBW mix with no multi
colored shadows
Vivid, saturated and uniform colors
Color temperature presets: 2700K, 3200K, 4200K, 5600K &
8000K
Control
DMX Channels: 18/19/20/98
Wireless DMX (optional)
Advanced RDM Function
Indicated temperature for base, arm & lamp
IC backup communication
RDM read voltage, current power consumption of the lamp
Soware update vía DMX
Fan speed based on temperature
Movement
Pan: 540° / 630º
Tilt: 265°
3-phase motor
16-bit resolution
Auto repositioning
Electrical
Input voltage range: 100–240V, 50-60Hz
Power Supply: Automatic range
Max. power consumption: 316W
Physical
DMX Connectors: 2 XLR connectors (XLR-3 input & output)
Power supply connectors: PowerCON® In/Out
2.4 inches LCD graphic display
Dimensions: 344x250x445 mm. / 13.5x9.8x17.5 in.
Weight: 12 Kg. / 26.4 Lbs.
p. 3ION 1915Z
ENGLISH VERSION
9. Wireless indicator
10. Mic
11. Le button
12. Battery indicator
13. Up button
14. Down button
15. Enter button
16. Right button
17. 3-pin DMX in
18. 5-pin DMX in
19. 3-pin DMX out
20. 5-pin DMX out
21. Powercon in
22. Powercon out
23. Fuse
24. Power switch
1. Project lens
2. Head
3. Arm
4. Base
5. Display
6. Foot stand
7. Operation button
8. Handel
Description of the Device
Safety and maintenance Information
Before operate this unit, please carefully read this users guide and keep if
needed in future. It’s necessary to respect following rules.
The disposal of the device aer lifecycle could damage the environment, need
to take it to special company for recycling or return to authorized dealer.
The products referred to in this manual conform to the European Community
Directives and are therefore marked with CE logo.
Keep this device away from children and unauthorized users, the manufacturer will not take responsibility for the damage due to any disregard of the
information provided in this manual and wrong operation.
Before operate the device, pls make sure the xture is in good housing, ensure
pan and tilt can rotate in its complete range.
Pls make sure minimal 0.5m distance need to kept between the xture to any
ammable material.
The device can only run with 100-240v voltage, 50/60Hz power, don’t connect
to any other wrong power. Disconnect the device from main power before
open the shield or maintenance.
--0.5m
p. 4ION 1915Z
ENGLISH VERSION
The device is designed only for indoor usage, pls keep it away from moisture.
Do not expose the device under the sun or directly to any other lighting source.
Never look directly into the projecting lens when the xture is power on, the
light may trigger epileptic seizures in photosensitive persons or persons with
epilepsy. Especially at beam eect, extreme caution and observance of these
safety instructions is mandatory.
Don’t put or install the device on a surface that subject to vibration or bumps.
Ta=45ºC
The device is supposed to work in the temperate range -15° C and +45° C, do
not use the device when the temperate exceed this range.
The lens, shield need to be replaced when obviously broken, never use the
device when the shield is not completed closed.
Safety I class device, need to be earth connected.
When the xture is hanged overhead, the safety rope must be xed to the
bottom of the device to the appropriate xing point.
Always carry the device by the handles, do not take the head or arm directly
for transportation.
p. 5ION 1915Z
ENGLISH VERSION
Maintenance
Operation only allowed to qualied person, damages due to
unprofessional operation or remove of any parts inside will
not be considered in warranty service. There are no serviceable parts inside the device or package, service only leaves to
authorized dealers.
Never allow the optical components contact with oil, fat or
any other liquid.
A regular clearance of the device is needed for long-term usage, this is very helpful to maintain the lifetime and bright-
ness need to use a so and lint-free cloth to clean the optical
system, fan and air owing tunnel.
Trouble Shooting
Problems Possible reasons Checking or solutions
Device not power up
Powercon or power cable damaged Change a good power cable to try
Faulty power supply Replace new power supply
Pan/Tilt error or vibrate
Faulty Pan/Tilt PCB Replace PT001 PCB
Faulty opto sensor Replace opto sensor OP001
Cable loosen Check the cable connect to OP001
LED o
Temperature protection Check the temperature from menu
Fan not working Check the fan speed info from menu
Faulty LED Replace new LED
Dimmer and strobe set at 0 Set dimmer and strobe channel at 255
Faulty power supply Replace new power supply
Device not response to DMX
Faulty communication IC
Replace the IC with back-up one in the
display PCB
Faulty display PCB Replace new display PCB
Wrong DMX addressing Check the address and setting
Faulty DMX cable Change to a good DMX cable
Replacement of the fuse
Need to replace with same type and rating, which originally
installed in the device.
• Step One: Unplug power cable from main power.
• Step Two: Unscrew the fuse holder out of the housing
with a screwdriver.
• Step Three: Remove the broken fuse and replace with an
exact same type of new fuse.
• Step Four: Insert the fuse holder back to the housing and
screw tight and reconnect power.
p. 6ION 1915Z
ENGLISH VERSION
Installation
The device could be either put on a solid and even Surface, or
mounted upside down or sideways like le picture.
The mounting place must be suicient stable and be able to
support a weight of 10 times of the unit’s weight. When the
xture is hanged, always additionally secure the device with
the safety chain, fasten the safety rope at a suitable position
so that the maximum fall of the projector will be 20 cm
How to do mounting installation.
Step three: Install the whole device onto appropri-
ate truss and fasten the clamps, tight the safety rope
with the truss or other xing point at a suitable position that drop down distance not exceed 20 cm.
Step two: Install the clamp and bracket on the bottom of panel, fasten the quick-locks;
Step one: Installation the clamp onto the omega
bracket;
p. 7ION 1915Z
ENGLISH VERSION
Con-
nect
DMX Address① XXX DMX address seng
Wireless① Wireless Enabled
Light
Max Temperature① 80~139℃, 90℃ /176~282℉, 194℉
Lamp o if temperature connuously
over for 5 minutes
Lamp Adjust① PAN…… Adjust value of each channels
Informaon
Time Info.
Current XXXX(Hours) Fixture boot me
Fixture Life XXXX(Hours) Fixture total run me
Temperature Near Lamp Temp (depends on xture) Temperature Sensors
Fans Speed Near Lamp Fan (depends on xture) Fan speed Sensors
Channel Value PAN…… Display value of channel
Error Message Pan,Tilt…… Error channels
Fixture Model xxxxxxxxxxxx Display model brand and model
Soware Ver
1U01 V1.0.00
Version of each IC
2U01 V1.0.00
:
Control menu
Meaning of the icon in menu
Menu tree
Default setting shadowed. Mark with 1. Can be basic reload-
ed, 2. Be program reloaded, 3. Can be private reloaded.
CONNECT LIGHT INFOMATION SET PROGRAM
p. 8ION 1915Z
ENGLISH VERSION
Set
Reset
All Reset all
Pan&Tilt Reset Pan&Tilt
Others Reset Others
Movment
Pan Reverse① ON/OFF Pan Reverse
Tilt Reverse① ON/OFF Tilt Reverse
Pan Degree① 630/540 Choose Pan Degree
Encoders① ON/OFF Encoder wheel on/o
Pan/Tilt Mode① Stand/Smooth Choose pan/lt mode
UI Set
Mic Sens. ③ 0~99%,60% Sensivity of Mic
No Signal① Close/Hold/Auto/Music Mode when no signal
Temperature. C/F① Fahrenheit /Celsius Temperature at ℃/℉
Fans Mode①
Auto Speed /High
Speed
Fans mode
Hibernaon①
OFF,
01M~99M，15M
Sleeping mode
Backlight① 02~60m 02m
Show backlight me
Flip Display① ON/OFF
Display 180°reverse
Display Bright③ 00~31 10
Display Brightness
Brand Show① ON/OFF
Show brand or not
Key Lock① ON/OFF
Key lock on/o
Language① En/简/繁/Fr/Sp
Language Select
Users
User Mode①
Standard Standard mode
Extended Extended mode
Basic-8bit Basic-8bit mode
Basic-16bit Basic-16bit mode
User User program mode
Edit User③
Max Channel = XX
Edit users mode
PAN = CH01
:
Calibraon③
-Password- 0 Password: 050
Pan.. 0 Calibrate channel value
Fixture ID③
Name Name
-Password- Password: 050
PID Code Set PID of RDM
Wireless Set①
DMX On Cable ON/OFF DMX Send Out
Reset Connect ON/OFF Reset Connect
Reload Default
Basic Reload(①) ON/OFF Basic Reload
Program Reload(②) ON/OFF Program Reload
---Password--- XXX Password: 050
Private Reload(③) ON/OFF Private Reload
All Reload ON/OFF All Reload
p. 9ION 1915Z
ENGLISH VERSION
Program
Play①
DMX Re-
ceive
DMX Receive
Slave
Receive
Slave Receive 1,2,3 Choose slave posion
Sequence Master / Alone Run Sequence
Music Master / Alone Music mode
Select Chase②
Chase Part
1
Chase 1 ~ 8 Chase 1
Select and run auto program
Chase Part
2
Chase 1 ~ 8 Chase 2
Chase Part
3
Chase 1 ~ 8 Chase 3
Edit Chase②
Chase 1 Chase Test Test
: Step 01 0 Beginning scene
Chase 8 Step 64 0 Ending scene
Edit Scenes②
Edit Scene
001
Pan,Tilt,…… 0 Input manual scene
~ Edit
Scene 250
--Fade Time-- 0 Modify manually fading me
--Secne Time-- 0 Modify manually scene me
DMX Input Input scene from exterior controller
Scenes Record ScXX=>ScXX Auto Input scenes
p. 10ION 1915Z
ENGLISH VERSION
Loading...