Warning!
Like all electronic products, Blaze Scan led moonflower
must be used with common safety precautions in mind.
• The unit contains no user-serviceable parts. Refer servicing to qualified technicians only.
• The electrical installation should be carried out by qualified personal only, according to the regulations for electrical and mechanical safety in your country.
• Disconnect from electric mains power supply before removing covers or changing spare parts.
• Keep case closed while operating.
• Do not insert objects into air vents.
• Keep away from flames and flammable material.
• Keep away from liquids. Never operate in rain or
damp conditions.
• In eects lights are dropped or struck, disconnect mains
power supply immediately
• Have a qualified engineer inspect for safety before operating.
• LED and metal become hot during operation. Allow time
cool before handling.
• Not suitable for mounting on normally flammable surfaces. Disconnect from distance yo lighted objects is 0.4m.
• This appliance must be earthed.
• Keep the unit away from children.
• Please use the original packing when the device is to
be transported.
• Maximum save ambient temperature is 40°C. Don’t use
this unit at higher ambient temperatures.
• Due to safety reasons it is prohibited to make unauthorized modifications to the units.
• To protect the environment, please try to recycle the
packing material as much as possible.
• Read user manual instructions. Never remove warning
or information labels from the unit.
Important: Never look directly into the light source! Don’t use
the eect in the presence of persons suering from epilepsy.
BLAZE SCAN
ENGLISH VERSION
p. 3