TECOR F1251T, F1250T, F0500T, B6002AD, B3204UC Datasheet

...

Data Book

and Design Guide

TECCOR ELECTRONICS

1800 Hurd Drive

Irving, Texas 75038

United States of America

Phone: +1 972-580-7777

Fax: +1 972-550-1309

Web site: http://www.teccor.com

E-mail: sidactor.techsales@teccor.com

An Invensys company

Teccor Electronics is the proprietor of the SIDACtor®, Battrax®, and Tel eL in k

trademarks. All other brand names may be trademarks of their respective companies. Teccor Electronics SIDACtor products are covered by these and other U.S. Patents:

4,685,120 4,827,497 4,905,119 5,479,031 5,516,705

All SIDACtor products are recognized and listed under UL file E133083 as a UL 497B compliant device. All TeleLink fuses are recognized under UL file E191008 and are also listed for CSA marking by certificate LR 702828.

Teccor Electronics reserves the right to make changes at any time in order to improve designs and to supply the best products possible. The information in this catalog has been carefully checked and is believed to be accurate and reliable; however, no liability of any type shall be incurred by Teccor for the use of the circuits or devices described in this publication. Furthermore, no license of any patent rights is implied or given to any purchaser.

NOTES

Data Book and Design Guide +1 972-580-7777

Product Selection

Guide

1 Product Selection

Guide

Product Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

Product Packages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4

Part Number Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6

Description of Part Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-8

Electrical Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-10

Quality and Reliability. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-11

Standard Terms and Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-12

Product Description

Data Book and Design Guide

Product Description

SIDACtor components are solid state crowbar devices designed to protect telecom equipment during hazardous transient conditions. Capitalizing on the latest in thyristor advancements, Teccor makes SIDACtor devices with a patented ion implant technology. This technology ensures effective protection within nanoseconds, up to 5000 A surge current ratings, and simple solutions for regulatory requirements such as GR 1089, TIA-968 (formerly known as FCC Part 68), ITU-T K.20, ITU-T K.21, and UL 60950.

Operation

In the standby mode, SIDACtor devices exhibit a high off-state impedance, eliminating excessive leakage currents and appearing transparent to the circuits they protect. Upon application of a voltage exceeding the switching voltage (VS), SIDACtor devices crowbar and simulate a short circuit condition until the current flowing through the device is either interrupted or drops below the SIDACtor device’s holding current (I

). Once this occurs,

SIDACtor devices reset and return to their high off-state impedance.

V-I Characteristics

Advantages

Compared to surge suppression using other technologies, SIDACtor devices offer absolute surge protection regardless of the surge current available and the rate of applied voltage (dv/dt). SIDACtor devices:

• Cannot be damaged by voltage

• Eliminate hysteresis and heat dissipation typically found with clamping devices

• Eliminate voltage overshoot caused by fast-rising transients

• Are non-degenerative

• Will not fatigue

• Have low capacitance, making them ideal for high-speed transmission equipment

DRM

-V

-I

Product Description

Product Selection

Guide

Data Book and Design Guide +1 972-580-7777

Applications

When protecting telecommunication circuits, SIDACtor devices are connected across Tip and Ring for metallic protection and across Tip and Ground and Ring and Ground for longitudinal protection. They typically are placed behind some type of current-limiting device, such as Teccor’s F1250T Telelink slow blow fuse. Common applications include:

• Central office line cards (SLICs)

• T-1/E-1, ISDN, and xDSL transmission equipment

• Customer Premises Equipment (CPE) such as phones, modems, and caller ID adjunct boxes

• PBXs, KSUs, and other switches

• Primary protection including main distribution frames, five-pin modules, building entrance equipment, and station protection modules

• Data lines and security systems

• CATV line amplifiers and power inserters

• Sprinkler systems

For more information regarding specific applications, design requirements, or surge suppression, please contact Teccor Electronics directly at +1 972-580-7777 or through our local area representative. Access Teccor’s web site at http://www.teccor.com or e-mail us at sidactor.techsales@teccor.com.

Product Packages

Data Book and Design Guide

Product Packages

Surface Mount Packages

DO-214AA

Modified

DO-214AA

Modified

MS-013 Six-pin

Surface Mount

(Fuse)

Balanced SIDACtor Device

✓

Battrax Dual Negative SLIC Protector ✓

Battrax Dual Positive/Negative SLIC

Protector

✓

Battrax Quad Negative SLIC Protector ✓

Battrax SLIC Protector ✓✓

CATV/HFC SIDACtor Device

CATV Line Amplifiers/Power Inserters SIDACtor Device

Fixed Voltage SLIC Protector

✓✓

Four-port Metallic Line Protector

High Surge (D-rated) SIDACtor Device ✓

LCAS Asymmetrical Device ✓✓

Longitudinal Protector ✓✓

MC Balanced SIDACtor Device ✓

MC SIDACtor Device ✓✓

Multiport Balanced SIDACtor Device ✓

Multiport Quad SLIC Protector ✓

Multiport SIDACtor Device ✓

SIDACtor Device ✓✓✓

TeleLink Fuse ✓

Twin SLIC Protector ✓

Product Packages

Product Selection

Guide

Data Book and Design Guide +1 972-580-7777

Through-hole Packages

TO-92

Modified

TO-220 TO-218 Hybrid SIP

✓✓Balanced SIDACtor Device

Battrax Dual Negative SLIC Protector

Battrax Dual Positive/Negative SLIC

Protector

Battrax Quad Negative SLIC Protector

Battrax SLIC Protector

✓✓ CATV/HFC SIDACtor Device

✓✓ CATV Line Amplifiers/Power Inserters

SIDACtor Device

✓ Fixed Voltage SLIC Protector

✓ Four-port Metallic Line Protector

✓ High Surge (D-rated) SIDACtor Device

LCAS Asymmetrical Device

✓✓Longitudinal Protector

✓✓MC Balanced SIDACtor Device

✓✓✓ ✓MC SIDACtor Device

✓ Multiport Balanced SIDACtor Device

Multiport Quad SLIC Protector

✓ Multiport SIDACtor Device

✓✓✓ ✓SIDACtor Device

✓ TeleLink Fuse

Twin SLIC Protector

Part Number Index

Data Book and Design Guide

Part Number Index

Note: For explanation of part numbers, see "Description of Part Number" on page 1-8.

Part Number Page

A1220U_4 2-36

A1225U_4 2-36

A2106A_ 2-32

A2106U_ 2-20

A2106U_6 2-24

A2106Z_ 2-40

A5030A_ 2-32

A5030U_ 2-20

A5030U_6 2-24

A5030Z_ 2-40

B1100C_ 2-52

B1101U_ 2-54

B1101U_4 2-58

B1160C_ 2-52

B1161U_ 2-54

B1161U_4 2-58

B1200C_ 2-52

B1201U_ 2-54

B1201U_4 2-58

B2050C_ 2-52

B3104U_ 2-56

B3164U_ 2-56

B3204U_ 2-56

F0500T 2-66

F1250T 2-66

F1251T 2-66

P0080E_ 2-16

P0080S_ 2-4

P0080SA MC 2-8

P0080SC MC 2-6

P0080SD 2-10

P0080Z_ 2-44

P0084U_ 2-22

P0300E_ 2-16

P0300S_ 2-4

P0300SA MC 2-8

P0300SC MC 2-6

P0300SD 2-10

P0300Z_ 2-44

P0304U_ 2-22

P0602A_ 2-28

P0602AC MC 2-30

P0602Z_ 2-42

P0640E_ 2-16

P0640EC MC 2-18

P0640S_ 2-4

P0640SC MC 2-6

P0640SD 2-10

P0640Z_ 2-44

P0641CA2 2-48

P0641S_ 2-46

P0641U_ 2-50

P0642S_ 2-14

P0644U_ 2-22

P0720E_ 2-16

P0720S_ 2-4

P0720SC MC 2-6

P0720SD 2-10

P0720Z_ 2-44

P0721CA2 2-48

P0721S_ 2-46

P0721U_ 2-50

P0722S_ 2-14

P0724U_ 2-22

P0900E_ 2-16

P0900S_ 2-4

P0900SC MC 2-6

P0900SD 2-10

P0900Z_ 2-44

P0901CA2 2-48

P0901S_ 2-46

P0901U_ 2-50

P0902S_ 2-14

P0904U_ 2-22

P1100E_ 2-16

P1100S_ 2-4

P1100SC MC 2-6

P1100SD 2-10

P1100Z_ 2-44

P1101CA2 2-48

Part Number Page

P1101S_ 2-46

P1101U_ 2-50

P1102S_ 2-14

P1104U_ 2-22

P1200S_ 2-38

P1300E_ 2-16

P1300S_ 2-4

P1300SC MC 2-6

P1300SD 2-10

P1300Z_ 2-44

P1304U_ 2-22

P1400AD 2-60

P1402A_ 2-28

P1402AC MC 2-30

P1402Z_ 2-42

P1500E_ 2-16

P1500EC MC 2-18

P1500S_ 2-4

P1500SC MC 2-6

P1500SD 2-10

P1500Z_ 2-44

P1504U_ 2-22

P1553A_ 2-32

P1553AC MC 2-34

P1553U_ 2-20

P1553Z_ 2-40

P1556U_ 2-24

P1602A_ 2-28

P1602AC MC 2-30

P1602Z_ 2-42

P1800AD 2-60

P1800E_ 2-16

P1800S_ 2-4

P1800SC MC 2-6

P1800SD 2-10

P1800Z_ 2-44

P1803A_ 2-32

P1803AC MC 2-34

P1803U_ 2-20

P1803Z_ 2-40

Part Number Page

Part Number Index

Data Book and Design Guide +1 972-580-7777

Product Selection

Guide

P1804U_ 2-22

P1806U_ 2-24

P1900ME 2-64

P2000AA61 2-26

P2000S_ 2-38

P2103A_ 2-32

P2103AC MC 2-34

P2103U_ 2-20

P2103Z_ 2-40

P2106U_ 2-24

P2200AA61 2-26

P2202A_ 2-28

P2202AC MC 2-30

P2202Z_ 2-42

P2300E_ 2-16

P2300ME 2-64

P2300S_ 2-4

P2300SC MC 2-6

P2300SD 2-10

P2300Z_ 2-44

P2304U_ 2-22

P2353A_ 2-32

P2353AC MC 2-34

P2353U_ 2-20

P2353Z_ 2-40

P2356U_ 2-24

P2400AA61 2-26

P2500AA61 2-26

P2500S_ 2-38

P2600E_ 2-16

P2600EC MC 2-18

P2600S_ 2-4

P2600SC MC 2-6

P2600SD 2-10

P2600Z_ 2-44

P2604U_ 2-22

P2702A_ 2-28

P2702AC MC 2-30

P2702Z_ 2-42

P2703A_ 2-32

Part Number Page

P2703AC MC 2-34

P2703U_ 2-20

P2703Z_ 2-40

P2706U_ 2-24

P3000AA61 2-26

P3002A_ 2-28

P3002AC MC 2-30

P3002CA 2-12

P3002S_ 2-14

P3002Z_ 2-42

P3100AD 2-62

P3100E_ 2-16

P3100EC MC 2-18

P3100S_ 2-4

P3100SC MC 2-6

P3100SD 2-10

P3104U_ 2-22

P3100Z_ 2-44

P3203A_ 2-32

P3203AC MC 2-34

P3203U_ 2-20

P3203Z_ 2-40

P3206U_ 2-24

P3300AA61 2-26

P3403A_ 2-32

P3403AC MC 2-34

P3403U_ 2-20

P3403Z_ 2-40

P3406U_ 2-24

P3500E_ 2-16

P3500S_ 2-4

P3500SC MC 2-6

P3500SD 2-10

P3500Z_ 2-44

P3504U_ 2-22

P3602A_ 2-28

P3602AC MC 2-30

P3602Z_ 2-42

P4202A_ 2-28

P4202AC MC 2-30

Part Number Page

P4202Z_ 2-42

P4802A_ 2-28

P4802AC MC 2-30

P4802Z_ 2-42

P5103A_ 2-32

P5103AC MC 2-34

P5103U_ 2-20

P5106U_ 2-24

P6002A_ 2-28

P6002AC MC 2-30

P6002AD 2-62

P6002CA 2-12

P6002Z_ 2-42

Part Number Page

Description of Part Number

Data Book and Design Guide

Description of Part Number

The following illustration shows a description of a sample SIDACtor device part number.

P 210 2 A A

DEVICE TYPE P = SIDACtor

PACKAGE TYPE

A = TO–220

C = Three-leaded DO-214

E = TO–92

M = TO-218

S = DO–214

U = Six-pin SOIC

Z = SIP

LEAD FORM OPTIONS

TO-220 modified type 60, 61, or 62

For U type:

3 = 3 chips 4 = 4 chips 6 = 6 chips

CONSTRUCTION VARIABLE 0 = One chip 1 = Unidirectional part 2 = Two chips 3 = Three chips

RATING

A = 50 A (10x560 µs)

B = 100 A (10x560 µs)

C = 500 A (2x10 µs) D = 1000 A (8x20 µs) E = 3000 A (8x20 µs)

PACKING OPTIONS

RP1 = TO-92 reel pack (0.100" lead spacing) RP2 = TO-92 reel pack (0.200" lead spacing)

AP = Ammo pack

RP = Reel pack

TP = Tube pack

MEDIAN VOLTAGE RATING 210 = 210 V

0 = One SIDACtor Chip

2 = Two Matched SIDACtor Chips

3 = Three Matched SIDACtor Chips

Patented

Description of Part Number

Product Selection

Guide

Data Book and Design Guide +1 972-580-7777

The following illustration shows a description of a sample Battrax device part number.

The following illustration shows a description of a sample asymmetrical SIDACtor device part number.

B1 1 U A

DEVICE TYPE B = Battrax

PACKAGE TYPE

C = Three-leaded DO-214

U = Six-pin SOIC

CONSTRUCTION VARIABLE

0 = No diode

1 = Diode

4 = Four Battrax Devives

IPP RATING

A = 50 A (10x560 µs)

B = 100 A (10x560 µs)

C = 500 A (2x10 µs)

HOLDING CURRENT 05 = 50 mA 10 = 100 mA 16 = 160 mA 20 = 200 mA

Battrax TYPE 1 = Negative 2 = Positive 3 = Dual

A1806 U C

DEVICE TYPE A = Asymmetrical SIDACtor

PACKAGE TYPE

A = TO-220

M = TO-218

U = Six-pin SOIC

LEAD FORM OPTIONS

TO-220 modified type 60, 61, or 62

For U type: 3 = 3 chips 4 = 4 chips 6 = 6 chips

IPP RATING

A = 50 A (10x560 µs)

B = 100 A (10x560 µs)

C = 500 A (2x10 µs) D = 1000 A (8x20 µs) E = 3000 A (8x20 µs)

PACKING OPTIONS

AP = Ammo pack

RP = Reel pack

TP = Tube pack

MEDIAN VOLTAGE RATING 1806 = 180 V and 60 V

3 = Three Matched SIDACtor chips

Patented

Electrical Parameters

Data Book and Design Guide

Electrical Parameters

Electrical parameters are based on the following definition of conditions:

• On state (also referred to as the crowbar condition) is the low impedance condition reached during full conduction and simulates a short circuit.

• Off state (also referred to as the blocking condition) is the high impedance condition prior to beginning conduction and simulates an open circuit.

Off-state Capacitance — typical capacitance measured in off state

di/dt Rate of Rise of Current — maximum rated value of the acceptable rate of

rise in current over time

dv/dt Rate of Rise of Voltage — rate of applied voltage over time

Switching Current — maximum current required to switch to on state

DRM

Leakage Current — maximum peak off-state current measured at V

DRM

Holding Current — minimum current required to maintain on state

Peak Pulse Current — maximum rated peak impulse current

On-state Current — maximum rated continuous on-state current

TSM

Peak One-cycle Surge Current — maximum rated one-cycle AC current

Switching Voltage — maximum voltage prior to switching to on state

DRM

Peak Off-state Voltage — maximum voltage that can be applied while maintaining off state

On-state Forward Voltage — maximum forward voltage measured at rated on-state current

On-state Voltage — maximum voltage measured at rated on-state current

Quality and Reliability

Product Selection

Guide

Data Book and Design Guide +1 972-580-7777

Quality and Reliability

It is Teccor’s policy to ship quality products on time. We accomplish this through Total Quality Management based on the fundamentals of customer focus, continuous improvement, and people involvement.

In support of this commitment, Teccor applies the following principles:

• Employees shall be respected, involved, informed, and qualified for their job with appropriate education, training, and experience.

• Customer expectations shall be met or exceeded by consistently shipping products that meet the agreed specifications, quality levels, quantities, schedules, and test and reliability parameters.

• Suppliers shall be selected by considering quality, service, delivery, and cost of ownership.

• Design of products and processes will be driven by customer needs, reliability, and manufacturability.

It is the responsibility of management to incorporate these principles into policies and systems.

It is the responsibility of those in leadership roles to coach their staff and to reinforce these principles.

It is the responsibility of each individual employee to follow the spirit of this statement to ensure that we meet the primary policy — to ship quality products on time.

Standard Terms and Conditions

Data Book and Design Guide +1 972-580-7777

Standard Terms and Conditions

Supplier shall not be bound by any term proposed by Buyer in the absence of written agreement to such term signed by an authorized officer of Supplier.

(1) PRICE:

(A) Supplier reserves the right to change product prices at any time but, whenever practicable, Supplier will give Buyer at

least thirty (30) days written notice before the effective date of any price change. Unless Supplier has specifically agreed in writing, signed by an authorized officer of Supplier, that a quoted price shall not be subject to change for a certain time, all products shipped on or after the effective date of a price change may be billed at the new price level.

(B) Whenever Supplier agrees to a modification of Buyer's order (which modification must be in writing and signed by an

authorized officer of Supplier), Supplier reserves the right to alter its price, whether or not such price was quoted as “firm”.

(C) Prices do not include federal, state or local taxes, now or hereafter enacted, applicable to the goods sold. Taxes will

be added by Supplier to the sales prices whenever Supplier has legal obligation to collect them and will be paid by Buyer as invoiced unless Buyer provides Supplier with a proper tax exemption certificate.

(2) PRODUCTION: Supplier may, at its sole discretion and at any time, withdraw any catalog item from further production without

notice or liability to Buyer.

(3) INTEREST:

(A) All late payments shall bear interest thirty (30) days after the due date stated on the invoice until paid at the lower of one

and one-half percent per month or the maximum rate permitted by law. All interest becoming due shall, if not paid when due, be added to principal and bear interest from the due date. At Supplier's option, any payment shall be applied first to interest and then to principal.

(B) It is the intention of the parties to comply with the laws of the jurisdiction governing any agreement between the

parties relating to interest. If any construction of the agreement between the parties indicates a different right given to Supplier to demand or receive any sum greater than that permissible by law as interest, such as a mistake in calculation or wording, this paragraph shall override. In any contingency which will cause the interest paid or agreed to be paid to exceed the maximum rate permitted by law, such excess will be applied to the reduction of any principal amount due, or if there is no principal amount due, shall be refunded.

(4) TITLE AND DELIVERY: Title to goods ordered by Buyer and risk of loss or damage in transit or thereafter shall pass to Buyer

upon Supplier's delivery of the goods at Supplier's plant or to a common carrier for shipment to Buyer.

(5) CONTINGENCIES: Supplier shall not be responsible for any failure to perform due to causes reasonably beyond its control.

These causes shall include, but not be restricted to, fire, storm, flood, earthquake, explosion, accident, acts of public enemy, war rebellion, insurrection, sabotage, epidemic, quarantine restrictions, labor disputes, labor shortages, labor slow downs and sit downs, transportation embargoes, failure or delays in transportation, inability to secure raw materials or machinery for the manufacture of its devices, acts of God, acts of the Federal Government or any agency thereof, acts of any state or local government or agency thereof, and judicial action. Similar causes shall excuse Buyer for failure to take goods ordered by Buyer, from the time Supplier receives written notice from Buyer and for as long as the disabling cause continues, other than for goods already in transit or specially fabricated and not readily saleable to other buyers.

Supplier assumes no responsibility for any tools, dies, and other equipment furnished Supplier by Buyer.

(6) LIMITED WARRANTY AND EXCLUSIVE REMEDY: Supplier warrants all catalog products to be free from defects in materials

and workmanship under normal and proper use and application for a period of twelve (12) months from the date code on the product in question (or if none, from the date of delivery to Buyer.) With respect to products assembled, prepared, or manufactured to Buyer's specifications, Supplier warrants only that such products will meet Buyer's specifications upon delivery. As the party responsible for the specifications, Buyer shall be responsible for testing and inspecting the products for adherence to specifications, and Supplier shall have no liability in the absence of such testing and inspection or if the product passes such testing or inspection. THE ABOVE WARRANTY IS THE ONLY WARRANTY EXTENDED BY SUPPLIER, AND IS IN LIEU OF AND EXCLUDES ALL OTHER WARRANTIES AND CONDITIONS, EXPRESSED OR IMPLIED (EXCEPT AS PROVIDED HEREIN AS TO TITLE), ON ANY GOODS OR SERVICES SOLD OR RENDERED BY SUPPLIER, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THIS WARRANTY WILL NOT CREATE WARRANTY COVERAGE FOR ANY ITEM INTO WHICH ANY PRODUCT SOLD BY SUPPLIER MAY HAVE BEEN INCORPORATED OR ADDED.

SUPPLIER'S ENTIRE LIABILITY AND BUYER'S EXCLUSIVE REMEDY UNDER THIS WARRANTY SHALL BE, AT SUPPLIER'S OPTION, EITHER THE REPLACEMENT OF, REPAIR OF, OR ISSUANCE OF CREDIT TO BUYER'S ACCOUNT WITH SUPPLIER FOR ANY PRODUCTS WHICH ARE PROPERLY RETURNED BY BUYER DURING THE WARRANTY PERIOD. All returns must comply with the following conditions:

Standard Terms and Conditions

Product Selection

Guide

Data Book and Design Guide +1 972-580-7777

(A) Supplier is to be promptly notified in writing upon discovery of defects by Buyer. (B) Buyer must obtain a Return Material Authorization (RMA) number from the Supplier prior to returning product. (C) The defective product is returned to Supplier, transportation charges prepaid by Buyer. (D) Supplier's examination of such product discloses, to its satisfaction, that such defects have not been caused by

misuse, neglect, improper installation, repair, alteration, or accident.

(E) The product is returned in the form it was delivered with any necessary disassembly carried out by Buyer at Buyer's

expense.

IN NO EVENT SHALL SUPPLIER, OR ANYONE ELSE ASSOCIATED IN THE CREATION OF ANY OF SUPPLIER'S PRODUCTS OR SERVICES, BE LIABLE TO BUYER FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE INCLUDING LOSS OF PROFITS, LOSS OF USE, BUSINESS INTERUPTION, AND THE LIKE. BUYER ACKNOWLEDGES THAT THE ABOVE WARRANTIES AND LIMITATIONS THEREON ARE APPROPRIATE AND REASONABLE IN EFFECTUATING SUPPLIER'S AND BUYER'S MUTUAL INTENTION TO CONDUCT AN EFFICIENT TRANSACTION AT PRICES MORE ADVANTAGEOUS TO BUYER THAN WOULD BE AVAILABLE IN THE PRESENCE OF OTHER WARRANTIES AND ASSURANCES.

(7) PATENTS: Buyer shall notify Supplier in writing of any claim that any product or any part of use thereof furnished under this

agreement constitutes an infringement of any U.S. patent, copyright, trade secret, or other proprietary rights of a third party. Notice shall be given within a reasonable period of time which should in most cases be within ten (10) days of receipt by Buyer of any letter, summons, or complaint pertaining to such a claim. At its option, Supplier may defend at its expense any action brought against Buyer to the extent that it is based on such a claim. Should Supplier choose to defend any such claim, Supplier may fully participate in the defense, settlement, or appeal of any action based on such claim.

Should any product become, or in Supplier's opinion be likely to become, the subject of an action based on any such claim, Supplier may, at its option, as the Buyer's exclusive remedy, either procure for the Buyer the right to continue using the product, replace the product or modify the product to make it noninfringing. IN NO EVENT SHALL SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES BASED ON ANY CLAIM OF INFRINGEMENT.

Supplier shall have no liability for any claim based on modifications of a product made by any person or entity other than Supplier, or based on use of a product in conjunction with any other item, unless expressly approved by Supplier. Supplier does not warrant goods against claims of infringement which are assembled, prepared, or manufactured to Buyer's specifications.

(8) NON-WAIVER OF DEFAULT: Each shipment made under any order shall be treated as a separate transaction, but in the

event of any default by Buyer, Supplier may decline to make further shipments without in any way affecting its rights under such order. If, despite any default by Buyer, Supplier elects to continue to make shipments, its action shall not constitute a waiver of that or any default by Buyer or in any way affect Supplier's legal remedies for any such default. At any time, Supplier's failure to exercise any right to remedy available to it shall not constitute a waiver of that right or remedy.

(9) TERMINATION: If the products to be furnished under this order are to be used in the performance of a Government contract

or subcontract, and the Government terminates such contract in whole or part, this order may be canceled to the extent it was to be used in the canceled portion of said Government contract and the liability of Buyer for termination allowances shall be determined by the then applicable regulations of the Government regarding termination of contracts. Supplier may cancel any unfilled orders unless Buyer shall, upon written notice, immediately pay for all goods delivered or shall pay in advance for all goods ordered but not delivered, or both, at Supplier's option.

(10) LAW: The validity, performance and construction of these terms and conditions and any sale made hereunder shall be gov-

erned by the laws of the state of Texas.

(11) ASSIGNS: This agreement shall not be assignable by either Supplier or Buyer. However, should either Supplier or Buyer be

sold or transferred in its entirety and as an ongoing business, or should Supplier or Buyer sell or transfer in its entirety and as an ongoing concern, any division, department, or subsidiary responsible in whole or in part for the performance of this Agreement, this Agreement shall be binding upon and inure to the benefit of those successors and assigns of Supplier, Buyer, or such division, department, or subsidiary.

(12) MODIFICATION OF STANDARD TERMS AND CONDITIONS: No attempted or suggested modification of or addition to any

of the provisions upon the face or reverse of this form, whether contained or arising in correspondence and/or documents passing between Supplier and Buyer, in any course of dealing between Supplier or Buyer, or in any customary usage prevalent among businesses comparable to those of Supplier and/or Buyer, shall be binding upon Supplier unless made and agreed to in writing and signed by an officer of Supplier.

(13) QUANTITIES: Any variation in quantities of electronic components, or other goods shipped over or under the quantities

ordered (not to exceed 5%) shall constitute compliance with Buyer's order and the unit price will continue to apply.

NOTES

Data Book and Design Guide +1 972-580-7777

Data Sheets

2 Data Sheets

This section presents complete electrical specifications for Teccor’s SIDACtor solid state overvoltage protection devices.

DO-214AA Package Symbolization. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3

DO-214AA

SIDACtor Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4

MicroCapacitance (MC) SC SIDACtor Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6

MicroCapacitance (MC) SA SIDACtor Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-8

High Surge Current (D-rated) SIDACtor Device. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-10

Compak Two-chip SIDACtor Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-12

Ethernet/10BaseT/100BaseT Protector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-14

TO-92

SIDACtor Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-16

MicroCapacitance (MC) SIDACtor Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-18

Modified MS-013 (Six-pin Surface Mount)

Balanced Three-chip SIDACtor Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-20

Multiport SIDACtor Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-22

Multiport Balanced SIDACtor Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-24

Modified TO-220

SIDACtor Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-26

Two-chip SIDACtor Device. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-28

Two-chip MicroCapacitance (MC) SIDACtor Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-30

Balanced Three-chip SIDACtor Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-32

Balanced Three-chip MicroCapacitance (MC) SIDACtor Device . . . . . . . . . . . . . . . . . . . . . . . . . 2-34

LCAS

LCAS Asymmetrical Multiport Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-36

LCAS Asymmetrical Discrete Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-38

SIP Hybrid Overvoltage and Overcurrent Protector

Four-Port Balanced Three-chip Protector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-40

Four-Port Longitudinal Two-chip Protector. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-42

Four-Port Metallic Line Protector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-44

SLICs

Fixed Voltage SLIC Protector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-46

Twin SLIC Protector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-48

Multiport SLIC Protector. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-50

Battrax

Battrax SLIC Protector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-52

Battrax Dual Negative SLIC Protector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-54

Battrax Dual Positive/Negative SLIC Protector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-56

Battrax Quad Negative SLIC Protector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-58

CATVs

CATV and HFC SIDACtor Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-60

High Surge Current SIDACtor Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-62

CATV Line Amplifiers/Power Inserters SIDACtor Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-64

TeleLink Fuse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-66

Acronyms: CATV Community Antenna TV

HFC Hybrid Fiber Coax LCAS Line Circuit Access Switch SIP Single In-line Package SLIC Subscriber Line Interface Circuit

DO-214AA Package Symbolization

Data Book and Design Guide +1 972-580-7777

Data Sheets

DO-214AA Package Symbolization

Note: Date code is located below the symbolized part number.

Part Number Part Number Part Number

Catalog Symbolized Catalog Symbolized Catalog Symbolized

P0080SA P-8A P0901SC P91C P2300SB P23B

P0080SA MC P-8AM P1100SA P11A P2300SC P23C

P0080SB P-8B P1100SB P11B P2300SD P23D

P0080SC P-8C P1100SC P11C P2300SC MC P23CM

P0080SD P-8D P1100SD P11D P2500SA P25A

P0080SC MC P-8CM P1100SC MC P11CM P2500SB P25B

P0300SA P03A P1101CA2 P02A P2500SC P25C

P0300SA MC P03AM P1101SA P01A P2500SD P25D

P0300SB P03B P1101SC P01C P2500SC MC P25CM

P0300SC P03C P1200SA P12A P2600SA P26A

P0300SD P03D P1200SB P12B P2600SB P26B

P0300SC MC P03CM P1200SC P12C P2600SC P26C

P0640SA P06A P1200SD P12D P2600SD P26D

P0640SB P06B P1200SC MC P12CM P2600SC MC P26CM

P0640SC P06C P1300SA P13A P3002CB P30B

P0640SD P06D P1300SB P13B P3002SB P30B

P0640SC MC P06CM P1300SC P13C P3100SA P31A

P0641CA2 P62A P1300SD P13D P3100SB P31B

P0641SA P61A P1300SC MC P13CM P3100SC P31C

P0641SC P61C P1500SA P15A P3100SD P31D

P0720SA P07A P1500SB P15B P3100SC MC P31CM

P0720SB P07B P1500SC P15C P3500SA P35A

P0720SC P07C P1500SD P15D P3500SB P35B

P0720SD P07D P1500SC MC P15CM P3500SC P35C

P0720SC MC P07CM P1800SA P18A P3500SD P35D

P0721CA2 P72A P1800SB P18B P3500SC MC P35CM

P0721SA P71A P1800SC P18C P6002CB P60B

P0721SC P71C P1800SD P18D B1100CA B10A

P0900SA P09A P1800SC MC P18CM B1100CC B10C

P0900SB P09B P2000SA P20A B1160CA B16A

P0900SC P09C P2000SB P20B B1160CC B16C

P0900SD P09D P2000SC P20C B1200CA B12A

P0900SC MC P09CM P2000SD P20D B1200CC B12C

P0901CA2 P92A P2000SC MC P20CM B2050CA B25A

P0901SA P91A P2300SA P23A B2050CC B25C

SIDACtor Device

Data Book and Design Guide

SIDACtor Device

DO-214AA SIDACtor solid state protection devices protect telecommunications equipment such as modems, line cards, fax machines, and other CPE.

SIDACtor devices are used to enable equipment to meet various regulatory requirements including GR 1089, ITU K.20, K.21 and K.45, IEC 60950, UL 60950, and TIA-968 (formerly known as FCC Part 68).

* For individual “SA”, “SB”, and “SC” surge ratings, see table below.

General Notes:

• All measurements are made at an ambient temperature of 25 °C. I

applies to -40 °C through +85 °C temperature range.

• I

is a repetitive surge rating and is guaranteed for the life of the product.

• Listed SIDACtor devices are bi-directional. All electrical parameters and surge ratings apply to forward and reverse polarities.

• V

DRM

is measured at I

DRM.

• VS is measured at 100 V/µs.

• Special voltage (V

and V

DRM

) and holding current (IH) requirements are available upon request.

• Off-state capacitance is measured at 1 MHz with a 2 V bias and is a typical value for “SA” and “SB” product. “SC” capacitance is approximately 2x the listed value. The off-state capacitance of the P0080SB is equal to the “SC” device.

Electrical Parameters

Part

Number *

DRM

Volts

Vol ts

Volts

DRM

µAmps

mAmps

Amps

mAmps

P0080S_ 6 25 4 5 800 2.2 50 100

P0300S_ 25 40 4 5 800 2.2 50 110

P0640S_ 58 77 4 5 800 2.2 150 50

P0720S_ 65 88 4 5 800 2.2 150 50

P0900S_ 75 98 4 5 800 2.2 150 50

P1100S_ 90 130 4 5 800 2.2 150 40

P1300S_ 120 160 4 5 800 2.2 150 40

P1500S_ 140 180 4 5 800 2.2 150 40

P1800S_ 170 220 4 5 800 2.2 150 30

P2300S_ 190 260 4 5 800 2.2 150 30

P2600S_ 220 300 4 5 800 2.2 150 30

P3100S_ 275 350 4 5 800 2.2 150 30

P3500S_ 320 400 4 5 800 2.2 150 30

Surge Ratings

Series

2x10 µs

Amps

8x20 µs

Amps

10x160 µs

Amps

10x560 µs

Amps

10x1000 µs

Amps

TSM

60 Hz Amps

di/dt

Amps/µs

A 150 150 90 50 45 20 500

B 250 250 150 100 80 30 500

C 500 400 200 150 100 30 500

SIDACtor Device

Data Book and Design Guide +1 972-580-7777

Data Sheets

Thermal Considerations

Package Symbol Parameter Val ue Unit

DO-214AA T

Operating Junction Temperature Range -40 to +150 °C

Storage Temperature Range -65 to +150 °C

qJA

Thermal Resistance: Junction to Ambient 90 °C/W

DRM

-V

-I

DRM

-V

-I

V-I Characteristics

100

Peak Val u e

Half Value

t – Time (µs)

– Peak Pulse Current – %I

tr = rise time to peak value t

= decay time to half value

Waveform = t

x t

tr x td Pulse Wave-form

-8

-40 -20 0 20 40 60 80 100 120 140 160

-6

-4

Junction Temperature (TJ) – ˚C

Percent of V

Change – %

25 ˚C

Normalized VS Change versus Junction Temperature

0.4

-40 -20 0 20 40 60 80 100 120 140 160

0.6

0.8

1.0

1.2

1.4

1.6

1.8

2.0

Case Temperature (TC) – ˚C

Ratio of

= 25 ˚C)

25 ˚C

Normalized DC Holding Current versus Case Temperature

MicroCapacitance (MC) SC SIDACtor Device

Data Book and Design Guide

MicroCapacitance (MC) SC SIDACtor Device

The DO-214AA SC MC SIDACtor series is intended for applications sensitive to load values. Typically, high speed connections require a lower capacitance. C

values for the

MicroCapacitance device are 40% lower than a standard SC part.

This MC SIDACtor series is used to enable equipment to meet various regulatory requirements including GR 1089, IEC 60950, UL 60950, and TIA-968 (formerly known as FCC Part 68). Contact factory regarding ITU K.20, K.21, and K.45.

* For surge ratings, see table below. ** Contact factory for release date.

General Notes:

• All measurements are made at an ambient temperature of 25 °C. I

applies to -40 °C through +85 °C temperature range.

• I

is a repetitive surge rating and is guaranteed for the life of the product.

• Listed SIDACtor devices are bi-directional. All electrical parameters and surge ratings apply to forward and reverse polarities.

• V

DRM

is measured at I

DRM.

• VS is measured at 100 V/µs.

• Special voltage (V

and V

DRM

) and holding current (IH) requirements are available upon request.

• Off-state capacitance is measured at 1 MHz with a 2 V bias.

Electrical Parameters

Part

Number *

DRM

Volts

Vol ts

DRM

µAmps

mAmps

Amps

mAmps

P0080SC MC ** 6 25 4 5 800 2.2 50 55

P0300SC MC ** 25 40 4 5 800 2.2 50 35

P0640SC MC 58 77 4 5 800 2.2 150 60

P0720SC MC 65 88 4 5 800 2.2 150 60

P0900SC MC 75 98 4 5 800 2.2 150 60

P1100SC MC 90 130 4 5 800 2.2 150 50

P1300SC MC 120 160 4 5 800 2.2 150 50

P1500SC MC 140 180 4 5 800 2.2 150 50

P1800SC MC 170 220 4 5 800 2.2 150 40

P2300SC MC 190 260 4 5 800 2.2 150 40

P2600SC MC 220 300 4 5 800 2.2 150 40

P3100SC MC 275 350 4 5 800 2.2 150 40

P3500SC MC 320 400 4 5 800 2.2 150 40

Surge Ratings

Series

2x10 µs

Amps

8x20 µs

Amps

10x160 µs

Amps

10x560 µs

Amps

10x1000 µs

Amps

TSM

60 Hz Amps

di/dt

Amps/µs

C 500 400 200 150 100 30 500

MicroCapacitance (MC) SC SIDACtor Device

Data Book and Design Guide +1 972-580-7777

Data Sheets

Thermal Considerations

Package Symbol Parameter Value Unit

DO-214AA T

Operating Junction Temperature Range -40 to +150 °C

Storage Temperature Range -65 to +150 °C

qJA

Thermal Resistance: Junction to Ambient 90 °C/W

DRM

-V

-I

DRM

-V

-I

V-I Characteristics

100

Peak Val u e

Half Value

t – Time (µs)

– Peak Pulse Current – %I

tr = rise time to peak value t

= decay time to half value

Waveform = t

x t

tr x td Pulse Wave-form

-8

-40 -20 0 20 40 60 80 100 120 140 160

-6

-4

Junction Temperature (TJ) – ˚C

Percent of V

Change – %

25 ˚C

Normalized VS Change versus Junction Temperature

0.4

-40 -20 0 20 40 60 80 100 120 140 160

0.6

0.8

1.0

1.2

1.4

1.6

1.8

2.0

Case Temperature (TC) – ˚C

Ratio of

= 25 ˚C)

25 ˚C

Normalized DC Holding Current versus Case Temperature

MicroCapacitance (MC) SA SIDACtor Device

Data Book and Design Guide

MicroCapacitance (MC) SA SIDACtor Device

The DO-214AA SA MC SIDACtor series is intended for applications sensitive to load values. Typically, high speed connections require a lower capacitance. C

values for the

MicroCapacitance device are 40% lower than a standard SA part.

This MC SIDACtor series is used to enable equipment to meet various regulatory requirements including GR 1089, ITU K.20, K.21, and K.45, IEC 60950, UL 60950, and TIA968 (formerly known as FCC Part 68).

* For surge ratings, see table below.

General Notes:

• All measurements are made at an ambient temperature of 25 °C. I

applies to -40 °C through +85 °C temperature range.

• I

is a repetitive surge rating and is guaranteed for the life of the product.

• Listed SIDACtor devices are bi-directional. All electrical parameters and surge ratings apply to forward and reverse polarities.

• V

DRM

is measured at I

DRM.

• VS is measured at 100 V/µs.

• Special voltage (V

and V

DRM

) and holding current (IH) requirements are available upon request.

• Off-state capacitance is measured at 1 MHz with a 2 V bias.

Electrical Parameters

Part

Number *

DRM

Volts

Vol ts

DRM

µAmps

mAmps

Amps

mAmps

P0080SA MC 6 25 4 5 800 2.2 50 45

P0300SA MC 25 40 4 5 800 2.2 50 25

Surge Ratings

Series

2x10 µs

Amps

8x20 µs

Amps

10x160 µs

Amps

10x560 µs

Amps

10x1000 µs

Amps

TSM

60 Hz Amps

di/dt

Amps/µs

A 150 150 90 50 45 20 500

MicroCapacitance (MC) SA SIDACtor Device

Data Book and Design Guide +1 972-580-7777

Data Sheets

Thermal Considerations

Package Symbol Parameter Value Unit

DO-214AA T

Operating Junction Temperature Range -40 to +150 °C

Storage Temperature Range -65 to +150 °C

qJA

Thermal Resistance: Junction to Ambient 90 °C/W

DRM

-V

-I

DRM

-V

-I

V-I Characteristics

100

Peak Val u e

Half Value

t – Time (µs)

– Peak Pulse Current – %I

tr = rise time to peak value t

= decay time to half value

Waveform = t

x t

tr x td Pulse Wave-form

-8

-40 -20 0 20 40 60 80 100 120 140 160

-6

-4

Junction Temperature (TJ) – ˚C

Percent of V

Change – %

25 ˚C

Normalized VS Change versus Junction Temperature

0.4

-40 -20 0 20 40 60 80 100 120 140 160

0.6

0.8

1.0

1.2

1.4

1.6

1.8

2.0

Case Temperature (TC) – ˚C

Ratio of

= 25 ˚C)

25 ˚C

Normalized DC Holding Current versus Case Temperature

High Surge Current (D-rated) SIDACtor Device

Data Book and Design Guide

High Surge Current (D-rated) SIDACtor Device

DO-214AA SIDACtor solid state protection devices with a D surge rating protect telecommunications equipment such as modems, line cards, fax machines, and other CPE.

These SIDACtor devices withstand simultaneous surges incurred in GR 1089 lightning tests. (See "First Level Lightning Surge Test" on page 4-5.) Surge ratings are twice that of a device with a C surge rating. This allows a discrete surface mount version of Teccor’s patented “Y” configuration. (US Patent 4,905,119)

SIDACtor devices are used to enable equipment to meet various regulatory requirements including GR 1089, ITU K.20, K.21 and K.45, IEC 60950, UL 60950, and TIA-968 (formerly known as FCC Part 68).

* For surge ratings, see table below. ** Contact factory for release date.

General Notes:

• All measurements are made at an ambient temperature of 25 °C. I

applies to -40 °C through +85 °C temperature range.

• I

is a repetitive surge rating and is guaranteed for the life of the product.

• Listed SIDACtor devices are bi-directional. All electrical parameters and surge ratings apply to forward and reverse polarities.

• V

DRM

is measured at I

DRM.

• VS is measured at 100 V/µs.

• Special voltage (V

and V

DRM

) and holding current (IH) requirements are available upon request.

• Off-state capacitance is measured at 1 MHz with a 2 V bias and is a typical value.

Electrical Parameters

Part

Number *

DRM

Volts

Vol ts

Volts

DRM

µAmps

mAmps

Amps

mAmps

P0080SD ** 6 25 4 5 800 2.2 50 200

P0300SD ** 25 40 4 5 800 2.2 50 220

P0640SD ** 58 77 4 5 800 2.2 50 100

P0720SD ** 65 88 4 5 800 2.2 50 100

P0900SD ** 75 98 4 5 800 2.2 50 100

P1100SD 90 130 4 5 800 2.2 50 80

P1300SD 120 160 4 5 800 2.2 50 80

P1500SD 140 180 4 5 800 2.2 50 80

P1800SD 170 220 4 5 800 2.2 50 60

P2300SD 190 260 4 5 800 2.2 50 60

P2600SD 220 300 4 5 800 2.2 50 60

P3100SD 275 350 4 5 800 2.2 50 60

P3500SD 320 400 4 5 800 2.2 50 60

Surge Ratings

Series

2x10 µs

Amps

8x20 µs

Amps

10x160 µs

Amps

10x560 µs

Amps

10x1000 µs

Amps

TSM

60 Hz Amps

di/dt

Amps/µs

D 1000 800 400 300 200 50 1000

High Surge Current (D-rated) SIDACtor Device

Data Book and Design Guide +1 972-580-7777

Data Sheets

Thermal Considerations

Package Symbol Parameter Val ue Unit

DO-214AA T

Operating Junction Temperature Range -40 to +150 °C

Storage Temperature Range -65 to +150 °C

qJA

Thermal Resistance: Junction to Ambient 90 °C/W

DRM

-V

-I

DRM

-V

-I

V-I Characteristics

100

Peak Val u e

Half Value

t – Time (µs)

– Peak Pulse Current – %I

tr = rise time to peak value t

= decay time to half value

Waveform = t

x t

tr x td Pulse Wave-form

-8

-40 -20 0 20 40 60 80 100 120 140 160

-6

-4

Junction Temperature (TJ) – ˚C

Percent of V

Change – %

25 ˚C

Normalized VS Change versus Junction Temperature

0.4

-40 -20 0 20 40 60 80 100 120 140 160

0.6

0.8

1.0

1.2

1.4

1.6

1.8

2.0

Case Temperature (TC) – ˚C

Ratio of

= 25 ˚C)

25 ˚C

Normalized DC Holding Current versus Case Temperature

Compak Two-chip SIDACtor Device

Data Book and Design Guide

Compak Two-chip SIDACtor Device

The modified DO-214AA SIDACtor device provides low-cost, longitudinal protection.

SIDACtor devices are used to enable equipment to meet various regulatory requirements

including GR 1089, ITU K.20, K.21, and K.45, IEC 60950, UL 60950, and TIA-968 (formerly known as FCC Part 68).

* For surge ratings, see table below.

General Notes:

• All measurements are made at an ambient temperature of 25 °C. I

applies to -40 °C through +85 °C temperature range.

• I

is a repetitive surge rating and is guaranteed for the life of the product.

• Listed SIDACtor devices are bi-directional. All electrical parameters and surge ratings apply to forward and reverse polarities.

• V

DRM

is measured at I

DRM.

• VS is measured at 100 V/µs.

• Special voltage (V

and V

DRM

) and holding current (IH) requirements are available upon request.

• Off-state capacitance is measured between Pins 1-3 at 1 MHz with a 2 V bias.

• UL 60950 creepage requirements must be considered.

Electrical Parameters

Part

Number

DRM

Vol ts

DRM

Vol ts

DRM

µAmps

mAmps

Amps

mAmps

Pins1-2, 2-3 Pins 1-3 Pins 1-3

P3002CA 140 180 280 360 4 5 800 1 120 15

P6002CA 275 350 550 700 4 5 800 1 120 15

Surge Ratings

Series

2x10 µs

Amps

8x20 µs

Amps

10x160 µs

Amps

10x560 µs

Amps

10x1000 µs

Amps

TSM

60 Hz Amps

di/dt

Amps/µs

A 150 150 90 50 45 20 500

(T)

(R)

(G)

+ 182 hidden pages

TECOR F1251T, F1250T, F0500T, B6002AD, B3204UC Datasheet

Specifications and Main Features

Frequently Asked Questions

User Manual