n
Z
1 pole 6A, 1 form C (CO), 1 form A (NO)
n
Only 5mm wide
n
Flat pack version available
n
Sensitive coil 170mW
n
Reinforced insulation (protection classII)
n
Strong coil pins for DIN-rail socket
n
Allows high function- / packaging density
n
Cadmium-free contacts, AgNi 90/10 for AC-loads
General Purpose Relays
PCB Relays
Slimline PCB Relay SNR
SCHRACK
Typical applications
Interface technology, PLC’s, timers, centralized and decentralized heating
control
Approvals
VDE REG.-Nr. 6666, UL E214024
Technical data of approved types on request
Contact Data
Contact arrangement 1 form C (CO) or 1 form A (NO)
Rated voltage 250VAC
Max. switching voltage 400VAC
Rated current 6A
Limiting making current, max 4s, df 10% 10A
Breaking capacity max. 1500VA
Contact material AgSnO2, AgSnO
AgNi 90/10 gold plated
Min. recommended contact load 100mA, 12V 50mW
Frequency of operation, with/without load 6/1200min
Operate/release time max. 12/5ms
Bounce time max., form A/form B 3/8ms
Contact ratings
Type Contact Load Cycles
EC 61810
V23092-*****-A301, -A801 C (CO) 6A, 250VAC, cosφ=1, 85°C 5x10
UL 508
V23092-*****-A301, -A801 A/B 6A, 250VAC,
general purpose, 85°C 6x10
V23092-*****-A301, -A801 A/B B300, 85°C 6x10
V23092-*****-A301, -A801 A/B R300, 85°C 6x10
EN60730-1
V23092-*****-A302 A (NO) 3A (1.5A), 250VAC, 85°C 100x10
V23092-*****-A302, -A802 A (NO) 5A (1.5A), 250VAC, 85°C 10x103
Mechanical endurance, DC coil 10x106 operations
2
-1
F0140-D
V
Coil Data
Coil voltage range 5 to 60VDC
Operative range, IEC 61810 2
Coil versions, DC coil
Coil Rated Operate Release Coil Rated coil
code voltage voltage voltage resistance power
VDC VDC VDC Ω±10%1) mW
005 5 3.5 0.25 147 170
012 12 8.4 0.6 848 170
024 24 16.8 1.2 3390 170
048 48 33.6 2.4 106001) 217
060 60 42.0 3.0 205001) 176
1) Coil resistance ±15%.
All figures are given for coil without pre-energization, at ambient temperature +23°C.
Other coil voltages on request.
3
3
3
3
3
04-2011, Rev. 0411
www.te.com
© 2011 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
Insulation Data
Initial dielectric strength
between open contacts 1000V
between contact and coil 4000V
Clearance/creepage
between contact and coil ≥6/8mm
Material group of insulation parts IIIa
Tracking index of relay base PTI250
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ section, application notes and all specifications
are subject to change.
rms
rms
1
General Purpose Relays
PCB Relays
Slimline PCB Relay SNR (Continued)
SCHRACK
Other Data
Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content
refer to the Product Compliance Support Center at
www.te.com/customersupport/rohssupportcenter
Ambient temperature -40 to +85°C
Category of environmental protection
IEC 61810 RTIII - wash tight
Vibration resistance (functional),
form A (NO) / form B (NC) 10/5g
Shock resistance (functional),
form A (NO) / form B (NC) 10/5g
Shock resistance (destructive) 30g
Terminal type PCB-THT, plug-in
Mounting PCB, socket
Weight 6g
Resistance to soldering heat THT
IEC 60068-2-20 260°C/5s
2)
Packaging unit tube/20 pcs., box/1000 pcs.
2) for flat pack version selective soldering is recommended
Accessories
For details see datasheet Accessories Slim Interface Relay SNR
PCB layout / terminal assignment
Bottom view on solder pins
S0258-AA
1 form C contact (1 CO)
S0258-AB
1 form A contact (1 NO)
S0258-AC
Dimensions
Vertical version Flat pack version
S0283-A
2) for flat pack version selective soldering is recommended
Version for DIN-rail socket
S0283-AB
2)
S0284-A
2
04-2011, Rev. 0411
www.te.com
© 2011 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ section, application notes and all specifications
are subject to change.
General Purpose Relays
PCB Relays
SCHRACK
Slimline PCB Relay SNR (Continued)
Product code structure Typical product code V23092 -A 1 005 -A 3 01
Type
V23092 Slimline PCB relay SNR
Version
A PCB, vertical version B PCB, flat pack version
S Plug-in, vertical version
Version
1 Wash tight
Coil
Coil code: please refer to coil versions table
Contact system
A Standard
Contact material
2 AgSnO2, gold plated 3 AgSnO
8 AgNi 90/10
Contact configuration
01 1 form C contact (1 CO) 02 1 form A contact (1 NO)
NO version with 8/8mm clearance and creepage and other types on request
2
Product code Version Contact arrangement Contact material Coil Part number
V23092-A1005-A201 PCB 1 form C (CO) contact AgSnO2, gold plated 5VDC 1393236-1
V23092-A1005-A202 vertical version 1 form A (NO) contact 8-1415067-1
V23092-A1005-A301 wash tight 1 form C (CO) contact AgSnO2 1393236-2
V23092-A1005-A302 1 form A (NO) contact 9-1415067-1
V23092-A1005-A801 1 form C (CO) contact AgNi 90/10 1-1415068-1
V23092-A1005-A802 1 form A (NO) contact 1415068-1
V23092-A1012-A201 1 form C (CO) contact AgSnO2, gold plated 12VDC 1393236-4
V23092-A1012-A202 1 form A (NO) contact 1393236-5
V23092-A1012-A301 1 form C (CO) contact AgSnO2 1393236-7
V23092-A1012-A302 1 form A (NO) contact 1393236-8
V23092-A1012-A801 1 form C (CO) contact AgNi 90/10 1-1393236-3
V23092-A1012-A802 1 form A (NO) contact 2-1415068-1
V23092-A1024-A201 1 form C (CO) contact AgSnO2, gold plated 24VDC 2-1393236-1
V23092-A1024-A202 1 form A (NO) contact 2-1393236-2
V23092-A1024-A301 1 form C (CO) contact AgSnO2 2-1393236-4
V23092-A1024-A302 1 form A (NO) contact 2-1393236-5
V23092-A1024-A801 1 form C (CO) contact AgNi 90/10 3-1393236-0
V23092-A1024-A802 1 form A (NO) contact 5-1415063-1
V23092-A1048-A201 1 form C (CO) contact AgSnO2, gold plated 48VDC 3-1393236-5
V23092-A1048-A202 1 form A (NO) contact 3-1393236-6
V23092-A1048-A301 1 form C (CO) contact AgSnO2 3-1393236-7
V23092-A1048-A302 1 form A (NO) contact 3-1393236-8
V23092-A1048-A801 1 form C (CO) contact AgNi 90/10 3-1393236-9
V23092-A1048-A802 1 form A (NO) contact 3-1415068-1
V23092-S1005-A201 Plug-in 1 form C (CO) contact AgSnO2, gold plated 5VDC 1956024-9
V23092-S1005-A301 vertical version AgSnO2 1-1956024-0
V23092-S1012-A201 wash tight AgSnO2, gold plated 12VDC 1956024-1
V23092-S1012-A301 AgSnO2 1956024-2
V23092-S1024-A201 AgSnO2, gold plated 24VDC 1956024-3
V23092-S1024-A301 AgSnO2 1956024-4
V23092-S1048-A201 AgSnO2, gold plated 48VDC 1956024-5
V23092-S1048-A301 AgSnO2 1956024-6
V23092-S1060-A201 AgSnO2, gold plated 60VDC 1956024-7
V23092-S1060-A301 AgSnO2 1956024-8
04-2011, Rev. 0411
www.te.com
© 2011 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-
3
tion, application notes and all specifications
are subject to change.
Loading...