TECOM Cloud2door User Manual
Cloud doorbell Camera
User manual
Date: 2017.1.20
User Manual
2
Index
0 Doorbell Camera Installation........................ 3
1 Smartphone Setup ........................................ 3
1.1 Download Smartphone App....................................................................................3
1.2 Create an Account ..................................................................................................3
1.3 Doorbell Camera Connection .................................................................................5
1.4 Troubleshooting ....................................................................................................10
2 Operation ......................................................11
2.1 Cloud2door Home Page ....................................................................................... 11
2.2 Notifications .......................................................................................................... 11
2.3 Call Answer...........................................................................................................13
2.4 Doorbell Functions................................................................................................14
3 Menu............................................................. 18
3.1 System Settings....................................................................................................18
3.2 Account Management...........................................................................................23
3.3 About Devices.......................................................................................................25
3.4 Where to Buy........................................................................................................27
3.5 Feedback..............................................................................................................27
3.6 Log out..................................................................................................................28
3.7 Log In....................................................................................................................29
3.8 Forgot Password...................................................................................................29
4 Add more Smartphones to Doorbell.......... 29
4.1 Install App and Create Account ...........................................................................29
4.2 By using the Doorbell Camera Password ............................................................30
4.3 Request access to the Doorbell Camera .............................................................32
3
0 Doorbell Camera Installation
Before you continue following procedure, you must already finish the Doorbell Camera
installation. If not, please refer the doorbell quick installation guide to install your Doorbell
Camera.
1 Smartphone Setup
1.1 Download Smartphone App
Please download and install “Could2Door” App from App Store (For iOS) or Google Play
(For Android).
1.2 Create an Account
1) With the Smartphone connected to Internet via Home WiFi router, click Cloud2door icon
to open the App.
2) Please read the “Terms of Service” (“terms”). Click “Accept” if you agree these terms.
3) Select “Log in”, then “Create Account”.
User Manual
4
4) Enter a name, valid email address, and password for the account, then select “Create
Account”.
5) Check your email to receive authentication code. Enter the PIN code and click “OK”.
User Manual
5
6) Your account and password are bringing out automatically, click “Log In”.
1.3 Doorbell Camera Connection
The Doorbell Camera should be in Discovery mode and the button indicator should flash
red and green. If the Indicator does not flash, please pressing the call button for ten to
fifteen seconds to enter Discovery mode.
User Manual
6
1) Click “Add your new Doorbell Camera” to enter the Doorbell Setup page.
Android phone: Tap the “Choose Wi-Fi” button. It will jump to Wi-Fi setup page.
iOS phone: Press the “Home” key to back to home screen of iOS phone, and then
select Settings -> Wi-Fi.
2) Select Doorbell Camera from SSID list. The Doobell Camera SSID is “Doorbell
Camera_XXX” (Where XXX is the last 3 digits of the MAC address).
After it is connected, go back to Cloud2door App.
Button indicator
Call button
User Manual
7
(Android Smartphone) (iPhone)
3) Click Next button, and then select or custom a name to your doorbell.
4) Set the Time Zone, and if you live in the region that observes Daylight Saving Time
(DST), you should check the Daylight Saving Time.
User Manual
8
5) Setup a new password to doorbell. The password will be used for some doorbell related
operation (Ex: add/remove user account with doorbell).
# MAKE SURE TO MAKE A NOTE OF YOUR PASSWORD!
6) Home router connection. Choose the Choose home router from SSID list, and then enter
the password. If the home router doesn’t show in the list, please slide down to refresh the
SSID list once.
User Manual
9
7) Andoid Smartphone: Choose home Wi-Fi router from SSID list again, and then click
to back to the App.
iOS phone: It will auto reconnect to Home Wi-Fi router. If not, please go to Settings->Wi-Fi
page to choose home Wi-Fi router, and then back to App.
Smartphone may take a few seconds for registration. Once registration is successful,
the doorbell icon with a green tick will display on the screen.
S
lide down to
refresh the SSID
list.
User Manual
10
1.4 Troubleshooting
Q: The “Next” button is not activation after I connected my Smartphone to doorbell during
doorbell setup.
A: 1. Go back to the WiFi setting page to make sure it is connected with Doorbell
Camera_XXX.
2. If you have 3G/4G network connection, please turn off it and then try again.
Q: After finish the setup procedure, the button indicator flashes red on Doorbell Camera.
On Cloud2door App, the red circle with a X appears on doorbell icon.
A: When the button indicator flashes red slowly, it means that doorbell doesn’t connect to
network. It usually happens what a wrong password entered to cause Home WiFi router
connection failed. Please follow these steps to reconnect Doorbell Camera to Home WiFi
router again.
Step 1: Click
(menu) at upper right corner, then select System Settings ->
Cloud2door Settings (you need to wait for connection time out.) -> Device Settings ->
Remove doorbell.
Step 2: Pressing the call button for ten to fifteen seconds to enter Discovery mode
(button indicator flashes red and green).
Step 3: Click “Add your new Doorbell Camera”, and then follow steps for final Setup.
User Manual
11
2 Operation
2.1 Cloud2door Home Page
Below picture shows the Cloud2door home page. There is the green/red circle shows on
doorbell icon to indicate Doorbell Camera status.
2.2 Notifications
1. Missed Calls Log
A yellow circle with the number of missed calls shows on doorbell icon. It will be removed
when user views the Call Logs (Click the doorbell icon, then select Call Logs.).
2. Network Lost
When the DBC Network is lost the Red Circle with a X appears.
Doorbell
status
Connected
Disconnect
Menu
Doorbell
functions
Add second
doorbell
Loading...