TECO RG57A3/BGEF, RG57A4/BGEF User Manual
REMOTE CONTROL USER'S MANUAL
Inverter Split Systems
Comfort & 3D DC Inverter Series
Thank you very much for purchasing TECO air conditioner.
• Please read this user's manual carefully before using your air conditioner.
• Keep this manual in a safe place for furture reference.
The design and specifications are subject to change without prior notice for
product improvement. Consult with the sales agency or manufacturer for details.
REPAIRS, SERVICE & WARRANTY
It is hazardous for anyone installing, removing, altering, repairing,
servicing, or testing.
Only an Authorised Service Person can carry out servicing or repairs to
this appliance.
IF SERVICE IS REQUIRED
If you have a problem, and the problem persists after you have made the
checks mentioned in this manual, contact:
TECO Australia Service Department on 1300 660 037
(9am to 4pm AEST Mon to Fri) Email: had.service@teco.com.au
For warranty details please visit www.teco.com.au
Complete and retain the following information:
Name of retailer: _________________________________
Date of purchase: ________________________________
Model No. : _____________________________________
Serial No. : _____________________________________
MFG code: _____________________________________
Please retain proof of purchase for warranty claims.
GBG-PV4
E&OE
1
CONTENTS
2
Model
Rated Voltage
8m
3.0V (Dry batteries R03/LR03×2)
Comfort Series RG57A3/BGEF / 3D DC Inverter Series RG57A4/BGEF
Remote Control Specifications
Environment
Signal Receiving
Range
- 5°C ~ 60°C
MOD E
FAN
TEM P
SLE EP FRESH
LED FOL LOW ME
TURB O SELF CLEA N
ON/O FF
SHO RT
CUT
TIME R
ON
TIME R
OFF
2
3
6
7
7
8
9
Handling The Remote Control .........................................................
13
Remote Control Specifications.........................................................
Features ..............................................................................................
LCD Display .......................................................................................
Operation.............................................................................................
COOL / HEAT / FAN Operation........................................................
DRY Operation ...................................................................................
TIMER Operation................................................................................
AUTO Operation.................................................................................
7
c
MOD E
FAN
TEM P
SLE EP FRESH
LED FOL LOW ME
TURB O SELF CLEA N
ON/O FF
SILENT
FP
TIME R
ON
TIME R
OFF
c
Comfort Series (RG57A 3/BGEF)
3D DC Inverter Series (RG57A4/BGEF)
3
4
MOD E
FAN
TEM P
SLEE P FRESH
LED FOL LOW ME
TURB O SELF CLEA N
ON/O FF
TIME R
ON
TIME R
OFF
1
2
4
5
3
9
10
8
6
7
11
12
13
14
1
2
3
4
5
For the detail, see sleep operation in
USER S MANUAL.
NOTE: While the unit is running under SLEEP
mode, it would be canceled if MODE, FAN
SPEED or ON/OFF button is pressed.
FRESH Button (Not applicable)
,
,,
,,
,,
,,
ON/OFF Button
This button turns the air conditioner ON
and OFF.
MODE Button
Press this button to modify the air conditioner
mode in a sequence of following:
AUTO
COOL
DRY
HEAT
FAN
FAN Button
Used to select the fan speed in four steps:
AUTO LOW MED HIGH
NOTE: You can not switch the fan speed in
AUTO or DRY mode.
SLEEP Button
Active/Disable sleep function. It can maintain
the most comfortable temperature and save
energy. This function is available on COOL,
HEAT or AUTO mode only .
7
SELF CLEAN Button
Active/Disable Self Clean function. Indoor
unit will run at special combined mode to
blow and dry indoor evaporator for a period
of time before switch off.
Features
8
10
9
Features
6
TURBO Button
Active/Disable Turbo function. Turbo function
enables the unit to reach the preset temperature at cooling or heating operation in the
shortest time(if the indoor unit does not
support this function, there is no
corresponding operation happened when
pressing this button.)
MOD E
FAN
TEM P
SLEE P FRESH
LED FOL LOW ME
TURB O SELF CLEA N
ON/O FF
TIME R
ON
TIME R
OFF
1
2
4
5
3
9
10
8
6
7
11
12
13
14
MOD E
FAN
TEM P
SLEE P FRESH
LED FOL LOW ME
TURB O SELF CLEA N
ON/O FF
TIME R
ON
TIME R
OFF
1
2
4
5
3
9
10
8
6
7
11
12
13
14
UP Button ( )
Push this button to increase the indoor
temperature setting in 1oC increments to 30oC.
DOWN Button ( )
Push this button to decrease the indoor
temperature setting in 1oC increments to 17oC.
SHORTCUT Button (Comfort Series)
Used to restore the current settings or resume
previous settings.
On the first time connecting to the power,
if the SHORTCUT button is pressed, the unit
will operate on AUTO mode, 24°C, and fan
speed is Auto.
If this button is pushed when the system is on,
the system will automatically revert
back to the previous settings including
operating mode, setting temperature, fan
speed level and sleep feature.
If pushed for more than 2 seconds, the system
will automatically restore the current operation
settings including operating mode,
temperature settings, fan speed level and
sleep feature.
SILENCE Button (3D DC Inverter Series)
Press once to Active/Disable Quiet function.
This will lower the fan speed to breeze.
FP Button (3D DC Inverter Series)
In heating operation, press and hold for 2
seconds to Active/Disable Freeze Protection
function. The preset temperature can be low
as 8°C, which keeps room temperature steady
at 8°C and prevents the house from freezing
when it is unoccupied in severe cold weather.
TIMER ON Button
Press this button to initiate the auto-on
time sequence. Each press will increase the
auto-timed setting in 30 minutes increments.
When the setting time displays 10H, each
press will increase the auto-timed setting 60
minutes increments.
To cancel the auto-timed program, simply
adjust the auto-on time to 0.0H.
Loading...