Page 1
MAX-hT™ LOW VOLTAGE CRUShER DUTy
AEHHGD, NEMA PREMIUM, DESIGN C (20 HP - 200 HP) [CDP]
AEEAGD, HIGH EFFICIENCY, DESIGN C [CD]
APPLICATIONS:
z Crushers z Ball Mills/ Rolling Mills
z Impactors z Any High Torque Application
z Chippers/ Shredders
FEATURES:
z Output Range: 20 - 600 HP
z Speed: 1800, 1200 & 900 RPM
z Enclosure: Totally Enclosed Fan Cooled (IP55)
z Voltage: 230/460V (Usable on 208V); 150HP and Larger is 460V Only
z Three Phase, 60 Hz, 1.15 Service Factor (Continuous); 50 Hz, 1.0 Service Factor (Continuous)
z CSA Certified for Class I, Div. 2, Groups B, C, D - Temp Code T3 Minimum
z CSA Certified for Class II, Div. 2, Groups F & G - Temp Code T3 Minimum (Frame 444T and above)
z Class F Insulation
z Class B Temperature Rise
z NEMA Design C Torques; Equal or Greater Than 200% Starting Torque / 250% Breakdown Torque
z Cast Iron Frame, End Brackets, Main Conduit Box; Rolled Steel Fan Cover
z Grounding Terminal Inside Main Conduit Box
z Oversized Main Conduit Box Rotatable in 90 Degree Increments - F1 Mounted
z Designed for 40˚C Ambient Temperature
z Designed for 3300 ft. Elevation
(3)
(8)
(2)
z Bi-Directional Rotation
z High Strength 4140 AISI Steel Shaft
z Aluminum Die Cast Squirrel Cage Rotor Construction
z Paint System: Phenolic Rust Proof Base Plus Polyurethane Top Coat
z Paint Color: Dark Gray - Munsell 7.5 BG 3.5/0.5
z High Quality Ball (or Roller) Bearings Regreasable with Mobil PolyrexTM EM
z Automatic Grease Discharge Fittings
z Gamma (Axial Face) Seal on Both Ends for F# 140T - 400T
z Labyrinth Type Metal Flinger on Both Ends for F# 440T and Larger
z Cast Iron Inner and Outer Bearing Caps for F# 320T and Larger
z Stainless Steel Nameplate
z New Dual Column Design Nameplate as Standard (60/50 Hz)
z Suitable for Inverter Use per NEMA MG-1.4.4.2, Part 31
(4,5)
z Inverter Duty Speed Range: 20:1 Variable Torque, 10:1 Constant Torque (350 HP and Larger are 3:1 Constant Torque)
z 12 Leads for 125 HP and Smaller
z 6 Leads for 150 HP and Larger
z Standard With Thermistors (PTC 140˚C) 1 per Phase
z Locknut and Washer on NDE for Vertical Shaft Down Applications on F# 440 and Larger
z Drain Holes / Plugs on Both End Brackets for Vertical Applications
z Threaded One Way Breather Drains for Horizontal Mount Applications
EXTRAS/ OPTIONS:
Please refer to pages 147 - 154 for common modifications that can be performed.
(1)
(6)
(6)
(7)
Effective 07-08-18
Supercedes 03-24-17
Notes:
(1) 575V motors available on a made-to order basis. Consult a Stock Product Application Specialist for details.
(2) Consult a Stock Product Application Specialist for suitability in higher ambient environments.
(3) Consult a Stock Product Application Specialist for suitability at higher elevations.
(4) Motor service factor is 1.0 when operated on a VFD.
(5) Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by the VFD as stated per NEMA MG-1. Part 31
(6) CSA Certification for Hazardous Locations only applies to AEHHGD, NEMA Premium Type.
(7) F# 5000 and with Larger with Pressed Steel Plate Main Conduit Box; CDPxxxxRZs have a cast iron box with grade 8 bolts.
(8) Additional Foot Grounding Provision for F# 440 and Larger.
Page 2
MAX-hT™ LOW VOLTAGE CRUShER DUTy
AEHHGD, NEMA PREMIUM, DESIGN C (20 HP - 200 HP) [CDP]
Effective 07-08-18
Supercedes 03-24-17
CATALOG NO. HP RPM FRAME FL EFF (%) FL PF (%)
CDP0204 20 1800 256T 93.0 86.0 23.4 395
CDP0206 20 1200 286T 91.7 84.0 24.3 520
CDP0208 20 900 324T 91.0 81.0 25.4 557
CDP0254 25 1800 284T 93.6 86.0 29.1 510
CDP0256 25 1200 324T 93.0 83.0 30.3 745
CDP0258 25 900 326T 91.0 80.0 32.2 665
CDP0304 30 1800 286T 93.6 87.5 34.3 545
CDP0306 30 1200 326T 93.0 80.5 37.5 775
CDP0308 30 900 364T 93.0 78.0 38.7 718
CDP0308R 30 900 364T 93.0 78.0 38.7 718
CDP0404 40 1800 324T 91.4 86.0 46.3 710
CDP0406 40 1200 364T 91.4 86.5 46.0 945
CDP0406R 40 1200 364T 91.4 86.5 46.0 945
CDP0408 40 900 365T 93.0 78.0 52.0 807
CDP0408R 40 900 365T 93.0 78.0 52.0 807
CDP0504 50 1800 326T 94.5 87.0 57.0 795
CDP0506 50 1200 365T 94.1 86.0 58.0 1,040
CDP0506R 50 1200 365T 94.1 86.0 58.0 1,040
CDP0508 50 900 404T 93.0 81.0 62.0 868
CDP0508R 50 900 404T 93.0 81.0 62.0 868
CDP0604 60 1800 364T 95.0 86.5 68.0 870
CDP0604R 60 1800 364T 95.0 86.5 68.0 870
CDP0606 60 1200 404T 94.5 87.0 68.0 1,295
CDP0606R 60 1200 404T 94.5 87.0 68.0 1,295
CDP0608 60 900 405T 93.0 81.0 75.0 1,243
CDP0608R 60 900 405T 93.0 81.0 75.0 1,243
CDP0754 75 1800 365T 95.4 86.5 85.0 1,075
CDP0754R 75 1800 365T 95.4 86.5 85.0 1,075
CDP0756 75 1200 405T 94.5 86.5 86.0 1,317
CDP0756R 75 1200 405T 94.5 86.5 86.0 1,317
CDP0758 75 900 444T 93.6 73.0 103 1,600
CDP0758R 75 900 444T 93.6 73.0 103 1,600
CDP1004 100 1800 405T 95.4 87.5 112 1,360
CDP1004R 100 1800 405T 95.4 87.5 112 1,360
CDP1006 100 1200 444T 95.0 82.5 119 1,665
CDP1006R 100 1200 444T 95.0 82.5 119 1,665
CDP1008 100 900 445T 93.6 78.0 128 1,800
CDP1008R 100 900 445T 93.6 78.0 128 1,800
CDP1254 125 1800 444T 95.4 85.0 144 1,705
CDP1254R 125 1800 444T 95.4 85.0 144 1,705
CDP1256 125 1200 445T 95.0 83.0 148 1,995
CDP1256R 125 1200 445T 95.0 83.0 148 1,995
CDP1258 125 900 447T 94.1 80.0 155 2,450
CDP1258R 125 900 447TZ 94.1 80.0 155 2,450
CDP1504 150 1800 445T 95.8 85.0 172 1,865
CDP1504R 150 1800 445T 95.8 85.0 172 1,865
CDP1506 150 1200 447T 95.8 83.5 176 2,363
CDP1506R 150 1200 447TZ 95.8 83.5 176 2,363
CDP1508 150 900 449T 94.1 80.0 187 2,800
CDP1508R 150 900 449TZ 94.1 80.0 187 2,800
CDP2004 200 1800 447T 95.4 87.0 226 2,465
CDP2004R 200 1800 447TZ 95.4 87.0 226 2,465
CDP2006T 200 1200 449T 95.8 84.0 233 2,783
CDP2006R 200 1200 449TZ 95.8 84.0 233 2,783
CDP2008T 200 900 449T 94.5 82.5 240 2,875
CDP2008TR 200 900 449TZ 94.5 82.5 240 2,875
Notes:
(1) AEHHGD "CDP" motors replace AEEAGD "CD" motor line in compliance to new DOE standards.
(2) All data subject to change without notice.
FL AMPS
(460V)
APPROX.
SHIPPING
WT. (lbs.)
Page 3
MAX-hT™ LOW VOLTAGE CRUShER DUTy
AEEAGD, HIGH EFFICIENCY, DESIGN C [CD]
Effective 07-08-18
Supercedes 03-24-17
CATALOG NO. HP RPM FRAME FL EFF (%) FL PF (%)
CD0204 20 1800 256T 91.0 90.0 22.9 395
CD0206 20 1200 286T 90.2 83.5 24.9 520
CD0208 20 900 324T 90.2 81.0 25.7 557
CD0254 25 1800 284T 92.4 86.5 29.3 510
CD0256 25 1200 324T 91.7 81.5 31.3 745
CD0258 25 900 326T 90.2 79.5 32.7 665
CD0304 30 1800 286T 92.4 88.0 34.6 545
CD0306 30 1200 326T 91.7 80.5 38.1 775
CD0308 30 900 364T 91.7 77.5 39.6 718
CD0404 40 1800 324T 93.0 90.0 44.8 710
CD0406 40 1200 364T 93.0 86.5 46.6 945
CD0406R 40 1200 364T 93.0 86.5 46.6 945
CD0408 40 900 365T 92.4 76.5 53.0 807
CD0408R 40 900 365T 92.4 76.5 53.0 807
CD0504 50 1800 326T 93.0 90.0 56.0 795
CD0506 50 1200 365T 93.0 85.5 59.0 1,040
CD0506R 50 1200 365T 93.0 85.5 59.0 1,040
CD0508 50 900 404T 93.0 80.5 62.5 868
CD0508R 50 900 404T 93.0 80.5 62.5 868
CD0604 60 1800 364T 93.6 87.0 69.0 870
CD0604R 60 1800 364T 93.6 87.0 69.0 870
CD0606 60 1200 404T 93.6 88.0 68.0 1,295
CD0606R 60 1200 404T 93.6 88.0 68.0 1,295
CD0608 60 900 405T 93.0 81.0 74.5 1,243
CD0608R 60 900 405T 93.0 81.0 74.5 1,243
CD0754 75 1800 365T 94.1 88.0 85.0 1,075
CD0754R 75 1800 365T 94.1 88.0 85.0 1,075
CD0756 75 1200 405T 93.6 88.5 85.0 1,317
CD0756R 75 1200 405T 93.6 88.5 85.0 1,317
CD0758 75 900 444T 92.4 79.5 95.6 1,600
CD0758R 75 900 444T 92.4 79.5 95.6 1,600
CD1004 100 1800 405T 94.5 90.0 110 1,360
CD1004R 100 1800 405T 94.5 90.0 110 1,360
CD1006 100 1200 444T 94.1 83.5 119 1,665
CD1006R 100 1200 444T 94.1 83.5 119 1,665
CD1008 100 900 445T 92.4 80.0 127 1,800
CD1008R 100 900 445T 92.4 80.0 127 1,800
CD1254 125 1800 444T 94.5 87.5 142 1,705
CD1254R 125 1800 444T 94.5 87.5 142 1,705
CD1256 125 1200 445T 94.1 83.0 150 1,995
CD1256R 125 1200 445T 94.1 83.0 150 1,995
CD1258 125 900 447T 93.0 81.0 155 2,450
CD1258R 125 900 447TZ 93.0 81.0 155 2,450
es:
Not
(1) Per DOE regulations, this High Efficiency inventory in 256T - 449T frame will be available through June 2018, or until current inventory has been
depleted. Whichever occurs first. Please see our new line of 256T - 449T frame Premium Efficient Crusher Duty (AEHHGD) motors on page 91.
(2) All data subject to change without notice.
FL AMPS
(460V)
APPROX.
SHIPPING
WT. (lbs.)
Page 4
MAX-hT™ LOW VOLTAGE CRUShER DUTy
AEEAGD, HIGH EFFICIENCY, DESIGN C [CD]
Effective 07-08-18
Supercedes 03-24-17
APPROX.
SHIPPING
WT. (lbs.)
CATALOG NO. HP RPM FRAME FL EFF (%) FL PF (%)
FL AMPS
(460V)
CD1504 150 1800 445T 95.0 88.0 168 1,865
CD1504R 150 1800 445T 95.0 88.0 168 1,865
CD1506 150 1200 447T 95.0 86.5 171 2,363
CD1506R 150 1200 447TZ 95.0 86.5 171 2,363
CD1508 150 900 449T 93.0 81.5 185 2,800
CD1508R 150 900 449TZ 93.0 81.5 185 2,800
CD2004R 200 1800 447TZ 95.0 88.5 223 2,465
CD2006R 200 1200 449TZ 95.0 86.5 228 2,783
CD2006RZ 200 1200 505UZ 95.0 85.0 231 3,500
CD2008R 200 900 5007C 94.1 80.0 249 3,728
CD2504TB 250 1800 449T 95.4 88.5 277 2,708
CD2504TR 250 1800 449TZ 95.4 88.5 277 2,708
CD2504R 250 1800 5007C 95.0 88.0 280 3,570
CD2504RZ 250 1800 505UZ 95.0 88.0 280 3,150
CD2506TR 250 1200 449TZ 95.4 88.5 277 2,800
CD2506R 250 1200 5007C 95.0 85.0 290 3,500
CD2506RZ 250 1200 586/7UZ 95.0 85.0 290 4,750
CD2508R 250 900 5009C 94.5 80.0 310 4,200
CD3004TR 300 1800 449TZ 95.4 88.5 333 2,800
CD3004R 300 1800 5007C 95.4 88.5 333 3,585
CD3004RZ 300 1800 586/7UZ 95.4 88.5 333 4,748
CD3006TR 300 1200 449TZ 95.4 88.5 333 3,100
CD3006R 300 1200 5009C 95.0 85.0 348 4,175
CD3006RZ 300 1200 586/7UZ 95.0 85.0 348 5,100
CD3008R
(1)
300 900 5806C 94.5 81.0 367 5,093
CD3504TR 350 1800 449TZ 95.4 88.5 388 3,100
CD3504R 350 1800 5009C 95.4 88.5 388 3,945
CD3504RZ 350 1800 586/7UZ 95.4 88.5 388 5,093
CD3506R 350 1200 5806C 95.0 85.0 406 4,750
CD3506RZ 350 1200 586/7UZ 95.0 85.0 406 5,565
CD3508R
(1)
350 900 5808C 94.5 81.0 427 5,610
CD4004R 400 1800 5806C 95.4 89.0 441 4,748
CD4004RZ 400 1800 586/7UZ 95.4 89.0 441 5,445
CD4006R
CD4006Rz
CD4008R
(1)
(1)
(1)
400 1200 5808C 95.0 85.5 461 5,100
400 1200 586/7UZ 95.0 85.5 461 6,020
400 900 5808C 95.0 81.0 487 5,828
CD4504R 450 1800 5808C 95.4 89.5 493 5,093
CD4504RZ 450 1800 586/7UZ 95.4 89.5 493 6,510
CD4506R
(1)
450 1200 5808C 95.4 85.5 517 5,565
CD5004R 500 1800 5808C 95.8 89.5 547 5,445
CD5006R
CD6004R
CD6006R
(1)
(1)
(1)
500 1200 5808C 95.4 85.5 574 6,020
600 1800 5808C 95.8 89.5 655 6,510
600 1200 5810C 95.4 85.5 689 6,898
Notes:
(1) Ratings in Bold Print do not have a DOE mandated NEMA Premium requirement and therefore will continue to be stock items. No change to current design.
(2) Per DOE regulations, the non-exempt High Efficiency inventory will be available through June 2018, or until current inventory has been
depleted. Whichever occurs first. Please see our new line of Premium Efficient Crusher Duty (AEHHGD) motors on page 91.
(3) All data subject to change without notice.
Loading...