Teco Max-E2/841 Catalog Page

MAX-E2/841® VERTICAL ROUND BODY SOLID SHAFT

NORMAL/MEDIUM THRUST with "P" BASE - LOW VOLTAGE

AEUH8BDP, NEMA PREMIUM, ROUND BODY [HBV_P]

APPLICATIONS:

z Centrifugal Pumps z Petro-Chemical z Water/Wastewater
z Pulp and Paper

FEATURES:

z Output Range: 15 - 100 HP
z Speed: 3600, 1800 & 1200 RPM
z Enclosure: Totally Enclosed Fan Cooled (IP56)
z Voltage: 460V Only

(1,4)

z Three Phase, 60 Hz, 1.15 Service Factor (Continuous); 50 Hz, 1.0 Service Factor (Continuous)
z CSA Certified for Class I, Div. 2, Groups B, C, D - Temp Code T3 Minimum
z Meets or Exceeds IEEE 841 Standards
z Extended Warranty - 60 Months from Date of Manufacture
z Class F Insulation
z Class B Temperature Rise
z NEMA Design B Torques as a Minimum; Various Ratings also Meet Design C
z Cast Iron Frame, End Brackets, Fan Cover, Drip Cover and Main Conduit Box
z Grounding Terminal Inside Main Conduit Box with additional Foot Grounding Provision
z Oversized Main Conduit Box Rotatable in 90 Degree Increments - F1 Mounted
z Designed for 50˚C Ambient Temperature
z Designed for 3300 ft. Elevation

(3)

(2)

z Bi-Directional Rotation
z 1045 Carbon Steel Shaft
z Aluminum Die Cast Squirrel Cage Rotor Construction
z Paint System: 2 Part Epoxy
z Paint Color: Blue - Munsell 5PB 3/8
z Guide Bearings: 250HP - 400HP Frames are Single Shielded
z Thrust Bearings: 250HP - 405HP Frames are Re-Greasable Angular Contact with Mobil PolyrexTM EM
z Automatic Grease Discharge Fittings
z Cast Iron Inner and Outer Bearing Caps for all frames
z VBXX INPRO™ Seals Installed on Both Ends
z Stainless Steel Nameplate and Hardware
z Stainless Steel Automatic Breather Drain (Located at both End Brackets for Vertical Mounts)
z New Dual Column Design Nameplate as Standard (60/50 Hz)
z Suitable for Inverter Use per NEMA MG-1 Part 31.4.4.2
z Inverter Duty Speed Range: 20:1 Variable Torque, 10:1 Constant Torque
z Motors are U.L. Recognized, CSA Approved
z 3 Leads Only
z Vibration Not to Exceed 0.08 Inches Per Second
z Noise Level Not to Exceed 85 dB(A) at 1 Meter Unloaded
z NEMA Type P Base

Effective 07-08-18

Supercedes 03-24-17

(5,6)

EXTRAS/ OPTIONS:

Please refer to pages 147 - 154 which show common modifications that can be performed.

Notes:

(1) 575V motors available.
(2) Consult a Stock Product Application Specialist for suitability in higher ambient environments.
(3) Consult a Stock Product Application Specialist for suitability at higher elevations.
(4) Motors 7.5 HP & up are suitable for wye/delta starting.
(5) Motor service factor is 1.0 when operated on a VFD.
(6) Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by the VFD as stated per NEMA MG-1.
(7) HP Shaft is same as VP shaft dimensions per NEMA MG-1.

MAX-E2/841® VERTICAL ROUND BODY SOLID SHAFT

NORMAL/MEDIUM THRUST with "P" BASE - LOW VOLTAGE

AEUH8BDP, NEMA PREMIUM, ROUND BODY [HBV_P]

Effective 07-08-18

Supercedes 03-24-17

CAT. N O. HP RPM FRAME FL EFF % FL PF %

HBV0156P 15 1200 284HP 92.4 83.5 18.2 1200 10.00 540
HBV0206P 20 1200 286HP 91.7 84.0 24.3 1570 10.00 565
HBV0252P 25 3600 284HP 92.4 91.0 27.8 900 10.00 490
HBV0254P 25 1800 284HP 93.6 86.0 29.1 1295 10.00 555
HBV0256P 25 1200 324HP 93.0 83.0 30.3 1750 16.5 759
HBV0302P 30 3600 286HP 93.0 91.0 33.2 960 16.5 535
HBV0304P 30 1800 286HP 93.6 87.5 34.3 1295 16.5 656
HBV0306P 30 1200 326HP 93.0 80.5 37.5 1750 16.5 795
HBV0404P 40 1800 324HP 94.1 86.0 46.3 1395 16.5 740
HBV0406P 40 1200 364HP 94.1 86.5 46.0 2200 16.5 898
HBV0504P 50 1800 326HP 94.5 87.0 56.9 1395 16.5 845
HBV0506P 50 1200 365HP 94.1 86.0 57.8 2200 16.5 1,110
HBV0604P 60 1800 364HP 95.0 86.5 68.4 1800 16.5 955
HBV0606P 60 1200 404HP 94.5 87.0 68.3 2825 16.5 1,355
HBV0754P 75 1800 365HP 95.4 86.5 85.1 1800 16.5 1,040
HBV0756P 75 1200 405HP 94.5 86.5 85.9 2825 16.5 1,363
HBV1004P 100 1800 405HP 95.4 87.5 112 2300 16.5 1,385

Notes:

(1) These motors are not readily available from stock; must be created through our Mod Shop.
(2) Please allow 4-6 weeks for delivery if source motor is available for modification.
(3) All data subject to change without notice.

FL AMPS

 460V

DOWN

THRUST

lbs.)

BD DIM

in.)

APPROX.

SHIPPING

WT. lbs.