TECNO MOBILE T632S User Manual

User Manual

Mobile Phone

Model：T632S

Hereby, TECNO MOBILE LIMITED

declares that this Mobile Phone

is in compliance with the

essential requirements and other

relevant provisions of Directive

2014/53/EU.

1

Foreword

Valuable mobile phone user, thank you for choosing our
mobile phone!
Our mobile phones reply to the People's Republic of
China communication industry standards and the
European standards and are approved for GSM networks.
Your phone may be used internationally with various
networks depending on your roaming arrangements with
your service provider.
To use this phone you must subscribe to a GSM service
from a provider. We have included many features in this
device but their function depends on the features
available on your subscribed wireless network. Please
contact your service provider for more information.
We strongly recommend you to carefully read and
understand this manual before using your phone in order
to keep it under best conditions for your effective usage
and utmost satisfaction.

2

1. Quick start

Install SIM card

This phone supports one GSM SIM cards. Find SIM card’s
groove in the back of the phone and slide it completely
there. During installation, please make sure the chip is
facing downwards and pay attention to slot direction.

Installing T-flash card

1. First switch off the phone and remove the battery.

2. Place the memory card into the SD card slot with the
metal contacts facing down.

Installing Battery

Align the battery chip with the metallic salient point in
battery jar; insert the battery until it is inserted into the
battery jar. Install the back cover into the back of the
phone until it is locked.

Battery Charging

Check the model number of any charger before use with
the device. Connect the charger to a wall outlet, and
connect the plug from the charger into the USB port on the
top of your phone. If we charge it with electricity, the
phone’s battery icon will move. After charging is finished,
just pull out the plug.

Switching on/off

Long press the power on/off key to switch on or off.

3

2. Call function

Dialing

1. Direct dial
In standby mode, press the corresponding numeric keys
to enter the phone number that you want to dial, including
necessary area codes. Short Press the Right soft key to
delete one character, and Long Press delete all inputs, i f
inserted only one SIM card, press the dial/receive key to
dial.

2. Making an international call
To make an international call, long press 0 key until the
prefix symbol "＋" of international call displays in screen.

3. Dialing from phonebook
Enter the phonebook via the menu, use the up/down
navigator keys to scroll to the desired contact, or press the
first letter of the name of the desired contact as saved in
your phonebook for quick access to names beginning with
the letter then scroll to the desired, press the dial/receive
key to dial.

4. Dialing from call history
Enter the call center (press the dial/receive key from
standby or via the menu), use the up/down navigator keys
to scroll to the desired contact, press the dial/receive key
to dial.

5. Dial emergency service
You can directly dial the emergency service number
without SIM card. Different networks use different
emergency service numbers, so for details please inquire
the network operation company.

4

Receiving calls

When there is an incoming call, the phone will give
corresponding alert, if your network supports caller ID, the
screen will display caller’s name or number (depending on
whether there is information of the caller in your
phonebook).

5

3. Menu functions

Contacts

You can use the phone's contacts feature to save the
contact name, number. The phone can save contacts on
the phonebook, the number of contacts that can be stored
in a SIM card varies according to their capacity.
Enter the contacts screen, you can add new contact, view
contacts list and select the contacts to call or other
operations.

SMS

Message service is a network dependent function, which
allows you to send, receive and edit all kinds of messages.
Please contact the network operator for more details.

Write message

Edit a new message, save or send it to the recipient.

Inbox

Received messages can be stored either in phone or in
SIM card memory, and are accessed here.
When you have received a message, the tones or
vibration will alert you and message mark will also be
shown on the screen. You can also access the inbox to
read the new message.
If the message memory is full, the indication “Memory full”
and the message icon will be shown and flashed on the
screen. Before you receive new messages, delete some
of your old messages in the inbox folder. If the capacity of
new messages is beyond the capacity of the inbox, the
information will be lost and incomplete.

Outbox

The SMS that failed to be sent, will be stored in the outbox,

6