TECNO MOBILE T473 User Manual

Mobile Explode picture

Item

Descripition

Item

Descripition

LCD Lens

Front Housing 3

LCD4Front Camera

PCBA6SPK

CAM Frame

Rear Housing

CAM Lens

Screw

Battery Cover

Battery Label

Back CAM

Mot coin

Fraglle Label

IMEI Label

Water-proof Label

Done

Main key

Label

Foreword

Valuable mobile phone user, thank you for choosing our mobile phone! Our mobile phones reply to the People's Republic of China communication industry standards and the European standards and are approved for GSM networks. Your phone may be used internationally with various networks depending on your roaming arrangements with your service provider. To use this phone you must subscribe to a GSM service from a provider. We have included many features in this device but their function depends on the features available on your subscribed wireless network. Please contact your service provider for more information. We strongly recommend you to carefully read and understand this manual before using your phone in order to keep it under best conditions for your effective usage and utmost satisfaction.

1. Quick start

Install SIM card

This phone supports two GSM SIM cards. Find SIM card’s groove in the back of the phone and slide it completely there. During installation, please make sure insert the SIM card into slot completely and pay attention to slot direction.

Installing T-flash card

1. First switch off the phone and remove the battery.

2. Place the memory card into the SD card slot with the metal contacts facing down.

Installing Battery

Align the battery chip with the metallic salient point in battery jar; insert the battery until it is inserted into the battery jar. Install the back cover into the back of the phone until it is locked.

Battery Charging

Check the model number of any charger before use with the device. Connect the charger to a wall outlet, and connect the plug from the charger into the USB port on the bottom of your phone. If we charge it with electricity, the phone’s battery icon will move. After charging is finished, just pull out the plug.

Switching on/off

Long press the power on/off key to switch on or off.

2. Call function

Dialing

1. Direct dial In standby mode, press the corresponding numeric keys to enter the phone number that you want to dial, including necessary area codes. Short press the right soft key to delete one character, and long press to delete all inputs, if only one SIM card is inserted, press the dial/receive key to dial, if two SIM cards are inserted, the phone displays select SIM card page, i f you select SIM1 then use SIM1 to dial, you select SIM2, then use SIM2 to dial.

2. Making an international call To make an international call, long press 0 key until the prefix symbol "＋" of international call displays in screen.

3. Dialing from Contacts Enter the contacts via the menu, use the up/down navigator keys to scroll to the desired contact, or press the first letter of the name of the desired contact as saved in your contacts for quick access to names beginning with the letter then scroll to the desired, press the dial/receive key to dial.

4. Dialing from call history Enter the call center (press the dial/receive key from standby or via the menu), use the up/down navigator keys to scroll to the desired contact, press the dial/receive key to dial.

5. Dial emergency service You can directly dial the emergency service number without SIM card. Different networks use different emergency service numbers, so for details please inquire

the network operation company.

Receiving calls

When there is an incoming call, the phone will give corresponding alert, if your network supports caller ID, the screen will display caller’s name or number (depending on whether there is information of the caller in your phonebook).

+ 12 hidden pages