TECNO MOBILE T347 User Manual

User’s Manual of itel Mobile Phone

1. Basic Information

1.1. Brief Introduction

Thanks for selecting itel color screen GSM digital mobile phone. Through reading the manual,
you can fully know how to use itel mobile phone, appreciate its complete function and simple
operating method.
itel color screen mobile phone is designed aiming at GSM/GPRS network environment; the phone
is Two Card Two Standby, but you can not call another SIM card when one SIM card is under
phone call. Besides basic call functions, itel also provides many kinds of practical functions, such
as name card holder, scene mode, message, audio and video player, camera and video, alarm clock,
calculator, STK, time and date, auto power-on and shut-down and etc. so that convenient for your
work and leisure activities. In addition, itel adopts personalized human-computer interface design,
its complete function can meet your different requirements.
itel color screen mobile phone accords with GSM criterion, has obtained the certification of
competent authority.
The company reserves the rights to revise the contents of the manual without prior notice.

2. Before Use

2.1. Install SIM Card and Memory Card

2.1.1. SIM Card

Before using the phone, you must insert valid SIM (Subscriber Identity Module) card in the phone.
SIM card 1s provided by network supplier.
All the information related to network connection are recorded in the chip of SIM card, also the
names, telephone numbers and SMS that storing in the name card holder of SIM card. You can
take out SIM card from your phone, and use it in any GSM mobile phone (new mobile phone can
read SIM card automatically).
In order to avoid losing or damaging the information saves in SIM card, please don’t touch the
metal contact surface, and place SIM card in the place that away from electricity and magnetic
force. Once SIM card is damaged, you can’t use the phone normally.
Prompt: Please make sure to power off the phone before taking out SIM card. It is absolutely
forbidden to insert or take out SIM card with external power supply; otherwise it may damage
SIM card and the phone.

2.1.2. Inserting and Taking out SIM Card

Metal contact surface of SIM card is easily scratched. You must take out SIM card carefully before
the assembly.

Power off the phone, remove the rear cover, battery or other external power supply.
　 According to the screen printing on the mobile phone into three SIM cards .
　 When taking out SIM card, directly pull it outward and then can take out SIM card.

Prompt: Without special explanation inserting two SIM cards are defaulted in the manua l. If you
just insert one SIM card, maybe some options of the menu will not be shown.

2.1.3. Memory Card

Aim at the T card slot and push the T card gently, and the card will be inserted correctly.
Prompt: If the memory card is failed, please check whether it is correctly placed and good contact

of metal point.

2.2. Battery

2.2.1. Install the Battery

Take off the rear cover, of the mobile.
　 Make one end of battery with metal surface aim at the battery connector.
　 Then gently press the battery downward using the finger, and then press the other end to

install the battery.
Prompt: Please operate correctly to avoid dam aging the battery connector.

2.2.2. Charging

Insert the charger on the charging interface at the side end of the phone.
After inserting the charging plug, battery strength icon stripe at the top right corner of the screen is
scrolling, which means that the charging is processing; when the stripe is full of the whole icon
and stop scrolling, which means that the battery charging is completed; when the charging is
completed, please pull out the plug.
When electric quantity is not enough, warning message will be sent; and electric quantity shows
empty. When electric quantity is too low, the phone will power off automatically. Please don’t
make the battery in the status of not enough electric quantity for a long time; otherwise it may
damage the battery quality and service life. Please don’t charge the battery for a long time.
Prompt: In order to ensure normal operation of the phone, please make sure to use the designated
charger.

2.2.3. Battery safety

Do not place the battery in fire; follow local laws and ordinances in disposing used
battery.
Check the model number of the charger before using it to charge the mobile.
Only use approved battery, charger and accessories applicable to the specific mobile model. Using
other types of battery, charger and accessories may violate the certification or warranty terms of
the equipment and may result in danger.”
Return waste and used batteries to the supplier or specified recovery site.
CAUTION!
Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.

2.3. Security Password

PIN
PIN (Personal Identification Number) is used to prevent your SIM card from being used illegally.
PIN is usually provided with SIM card together. If you input wrong PIN for continuous three
times, please input PUK to unlock it. Please contact with network operations company for more
details.
　 PIN 2
You need to input PIN2 when entering some functions (such as call charge); if you input wrong
PIN2 for continuous three times, you need to input PUK2 to unlock it. Please contact with
network operations company for more details.
　 PUK

When changing the locked PIN, you need to input PUK (Personal Unlock Key). PUK is provi ded
with SIM card together. If it is not provided, please contact with your service provider. If you
input wrong PUK for continuous ten times, the SIM card can’t be used again. Please contact with
your service provider to buy new card. You can’t change PUK. If you lose the code, please contact
with your service provider.
　 PUK2
When changing the locked PIN2, you need to input PUK2. If you input wrong PUK2 for
continuous ten times, you can’t use the functions that need PIN2. Please contact with your service
provider to buy new card. You can’t change PUK 2. If you lose the code, please contact with your
service provider.

3. Quick User Guide

3.1. Dial a Call

In standby mode, press numerical keys to input phone number to dial phone number. When you
finish inputting phone number, press the dial key to make a call. If you're making a long distance
call, add the area code preceding the telephone number.
Press left soft key to access Options.

3.2. Reject a Call

You can press End key to reject an incoming call.

3.3. Receive a Call

When an incoming call arrives, the phone will give out the corresponding prompt (such as
vibration, ring tone, and etc.); if network support, the phone screen will show the name and
telephone number of the caller; at this time, you can press Dial key to receive an incoming call.

3.4. End a Call

After finishing a call, you can press End key to end a call.

3.5. Emergency Services

You can directly dial an emergency service call without SIM card.
Different network uses different emergency numbers, please consult your network operations
company for more details.

3.6. Quick dial the extension number

After inputting telephone number, if you want to input branch number, please press and hold “0”,
input your extension number after the display screen shows “P”. After getting through the call, it
will directly dial the extension.

3.7. Call Center

Call history: You can enter call log to check the relevant details of dialed calls, missed calls,
received calls and rejected calls.
Prompt: The record of incoming call from blacklist number will be saved in Rejected Calls.
Call settings: Through this menu you can to set related functions about calling. Including
Dual-SIM, Call divert, Call waiting, Call barring, Hide ID and so on.

3.8. Call Divert

After call forward function is started, according to different forward conditions settings (Call
Forward Unconditionally, Forward Busy, Forward No Answer, Forward Can Not Reach), you can
select to switch the incoming call to voice inbox or other telephone numbers.

3.9. Call Waiting