TECNO MOBILE BB4 Quick Start Guide

Know your phone
1. Front camera
2. Volume key
3. Power key
2
SIM/SD card installation
1. Power off mobi le.
2. Refer to the following picture for SIM / SD card installation.
3
Charging the phone
You can charge your device using a charger or by connecting it to the computer using a USB cable (comes with t he phone).
1. Please remind the front and back of the plug.
2. Use only TECNO charger and cables. Other c hargers or cables may damage the device. This wi ll invalidate your phone warranty.
4
FCC Caution
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired ope ration.
Any changes or modifications not expressly app roved by the party responsible for compliance could void the user's authority to operate the equipment.
Note: This equipment has been tes ted and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a reside ntial installation. This equipment generates uses and can radiate radio frequency energy an d, if not installed and used in accordan ce with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. I f this equipment does cause harmful interf erence to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit differe nt from that to which the receiver is connected.
-Consult the dealer or an experienced radi o/TV technician for help.
Specific Absorption Rate (SAR) information:
This mobile phone meets the government's requirements for exposure to radio waves. The guidelines are based on standards that were dev eloped by independent scientific organizations through pe riodic and thorough evaluation of scientific studi es. The standards include a substantial safety margin designed to assure the safety of all persons r egardless of age or health. FCC RF Exposure Information and S tatement the SAR limit of USA (FCC) is
1.6 W/kg averaged over one gram of tissue. Device types: mobile phone (FCC ID: 2ADYY-BB4) has also been tes ted against this SAR lim it. The highest SAR value reported under this standar d during product certification for use at the ear is 0.96 W/kg and when properly worn on the body is
0.5 W/kg. This device was tested for typical body-worn
operations with the back of the han dset kept10 mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 10 mm separation distance between t he user's body and the back of the handset. The use of belt clips, hol sters and similar accessories should not contain m etallic components in i ts assembly. The use of accessories that does not satisfy these requi rements may not comply with FCC RF exposure requi rements, and should be avoided.
Loading...