TecNec RFR 1000-1 Data Sheet

yellobrik

yellobrik 19” 1RU Rack Frame

• Compact 1 RU design

• Will accommodate up to 14 yellobriks

• External 12VDC power inputs

• Primary and redundant power options

• Power failure alarm GPO outputs

• Adjustable 19” mounting brackets to recess frame

The RFR 1000-1 is a compact 1 RU high mounting frame designed
for yellobriks. Up to 14 yellobriks can be vertically mounted and are
mechanically clamped securely in place. Each slot has its own integrated
power connector on a central power bus.

The rack has two external 12VDC inputs for power, one for primary
power, the second for redundant backup. An optional external power
brick is available which provides enough power for any combination of
yellobriks. A second unit can be used for redundant backup.

Primary and redundant power LEDs are located in the front panel as well
as GPO connections for the power supply failure alarms.

While the frame will accommodate all yellobriks, it is ideally suited for
the yellobrik fiber converters, which are typically used in larger numbers.
Fiber connections are on the front and the SDI copper connection in
the rear. A space is left open on one side to route the fiber loops from
front to rear making for a very clean installation. The module fiber RX
and TX activity LEDs can be seen clearly from the front with the modules
installed. To protect the fiber cables and connections the 19” mounting
brackets can be repositioned to recess the rack frame.

Technical Specifications

Power Inputs

Size

Weight

Model #

Options

Includes

®

RFR 1000-1

External +12VDC primary power input
External +12VDC redundant power input
Connector: Molex Mini Fit Series5557
Power LED’s on front of chassis
Primary and redundant power failure GPO alarm outputs

19” Rack mount x 1RU high x 145mm deep (5.7”)

1.6 Kg (3.52 Lbs) - with no modules installed

RFR 1000-1 ( EAN# 4250479324725 )

RPS 1120 EU external power supply (12V 10A) with EU power cord
RPS 1120 UK external power supply (12V 10A) with UK power cord
RPS 1120 US external power supply (12V 10A) with US power cord

(use 2 units for primary and redundant power protection)

Rack Frame assembly (empty) and qty 14 module securing brackets

external power brick (use second brick for redundant protection)

®

LYNXTechnik AG | Broadcast Television Equipment

Power connectors on integrated power bus

Modules are clamped securely into positionRear of rack frame showing power connectors and one optional

www.lynx-technik.com